Naringin-loaded Poly(ε-caprolactone)/Gelatin Electrospun Mat as a Potential Wound Dressing: In vitro and In vivo Evaluation

In the present study, naringin, a flavonoid isolated from the grape and citrus fruit species, was incorporated with poly(ε-caprolactone)/gelatin composite mats in order to develop a potential wound dressing. The composite mats were prepared by electrospinning of poly(ε-caprolactone)/gelatin (1:1 (w/w)) solution incorporated with 1.50 %, 3 % and 6 % (w/w) of naringin. The electrospun mats were evaluated regarding their morphology, contact angle, water-uptake capacity, water vapor transmission rate, tensile properties, drug release, cellular response and in vivo wound healing activity. The study showed that after 2 weeks, the full-thickness excisional wounds of Wistar rats treated with the naringin-loaded dressings achieved a wound closure of higher than 94 % and the dressing containing 6 % (w/w) naringin had almost 100 % wound closure. The sterile gauze, as the control group, showed nearly 86 % of wound closure after this period of time. Our results provided evidence that supports the possible applicability of naringin-loaded wound dressing for successful wound treatment.     

Free-Living Plant-Parasitic Nematodes do not Affect the Efficiency of Seed Tuber Fungicide Treatment against <Emphasis Type="Italic">Rhizoctonia solani</Emphasis>

Stem canker on germinating potato sprouts is often caused by seed-borne inoculum of the fungus Rhizoctonia solani. However, high amounts of free-living plant-parasitic nematodes have been found in field patches of potato plants with stem canker. Fungicide treatment of the seed tubers can be used to avoid stem canker caused by seed-borne inoculum but it is unknown if nematodes can affect this. To investigate whether free-living plant-parasitic nematodes, the root-lesion nematode Pratylenchus penetrans or a combination of several plant-parasitic nematode genera in a full nematode community, may have a negative effect on the fungicide seed treatment, a pot experiment with seed tubers inoculated with R. solani, half of which were treated with fungicides, was performed. The seed-borne inoculum caused severe damage to the plants, while no fungal damages were observed on the fungicide treated plants. This shows that the nematodes did not affect the fungicide treatment. The probability of black scurf decreased in treatments with a full nematode community, which may be due to the action of fungal-feeding nematodes.     

Electrical properties of graphene/waterborne polyurethane composite films

Graphene is classified as a carbon-based material. Structurally, graphene is made up of carbon-based two-dimensional atomic crystals and a one atom thick planar sheet of sp²-bonded carbon atoms. This sort of arrangement in graphene makes it a unique material with exceptional mechanical, physicochemical, thermal, electrical, optical, and biomedical properties. Methods for graphene-based fabric production mainly use graphene-based materials such as graphene (G), graphene oxide (GO), and reduced graphene oxide (rGO) coated on fabric or yarn. Waterborne polyurethane (WPU) is one of the most rapidly developing and active branches of polyurethane chemistry. More and more attention is being paid to graphene-coated fabrics owing to their low temperature flexibility, the presence of zero or very few VOCs (volatile organic compounds), water resistance, pH stability, superior solvent resistance, excellent weathering resistance, and desirable chemical and mechanical properties. It is used as a coating agent or adhesive for fibers, textiles, and leather. Also, graphene-containing materials have been used to enhance the properties of WPU. In this study, graphene/WPU composite solution and film was prepared to conduct basic research for developing electrical heating textiles which is not harmful to the human body, flexible and excellent in electrical properties. Graphene/WPU composite solutions were prepared with a graphene content of 0, 2, 4, 8, and 16 wt%, and graphene/WPU film was prepared with solution casting method. The graphene contents were analyzed for their surface morphology, electrical properties, and electrical heating properties.     

Nitrogen Fertilizer Management Practices to Reduce N<Subscript>2</Subscript>O Emissions from Irrigated Processing Potato in Manitoba

Nitrogen fertilizer practices affect nitrous oxide (N₂O) emissions from agricultural soils. The “4R” nutrient stewardship framework of using N fertilizer at the right rate, right source, right placement and right time can reduce N₂O emissions while maintaining or improving yield of field crops, but understanding of how the various factors affect N₂O emissions from irrigated processing potato is lacking. We examined the effects of selected 4R practices on emissions, using results from two irrigated processing potato studies each conducted in 2011 and 2012 in Manitoba, Canada. Experiment 1 examined combinations of source (urea, ESN), placement (pre-plant incorporation [PPI], banding), and rate (100 and 200 kg N ha^-1) on a clay loam soil. Experiment 2 examined timing and source treatment combinations (urea PPI, ESN PPI, urea split, urea split/fertigation) on a loamy fine sandy soil. For Experiment 1, use of ESN at 200 kg ha^-1 did not reduce area-, yield- and applied fertilizer N- based N₂O emissions compared to urea at 200 kg ha^-1, irrespective of placement. Emissions from pre-plant banding ESN at 200 kg ha^?1, however, were 32% lower than from PPI ESN. For Experiment 2, compared to single pre-plant urea application, fertigation simulated by in-season application of urea ammonium nitrate (UAN) gave lower area-, yield- and applied fertilizer N- based emissions. Split urea ( \( \raisebox{1ex}{$2$}\!\left/ \!\raisebox{-1ex}{$3$}\right. \) pre-plant, \( \raisebox{1ex}{$1$}\!\left/ \!\raisebox{-1ex}{$3$}\right. \) hilling) also reduced area- and yield- based N₂O emissions compared to single pre-plant urea application. Emissions were generally lower at the site with loamy fine sandy soil than the site with clay loam soil. These results demonstrate that combinations of “4R” practices rather than source alone are best to achieve reductions in N₂O emissions from irrigated potato production.     

Properties of polymers as a nanoscale material for fibers in leather

Hyperbranched polymers, an innovative class of nano-polymers, could enhance the properties of fibers owning to their unique structures. In this study, the ester compound (HPAE) of 3-(bis(2-hydroxyethyl)amino)propionic acid and pentaerythritol was treated with undecylenic acid to obtain novel hyperbranched multiterminal alkenyl polymers (HPAE-UAs). The sizes of the HPAE-UAs could be controlled conveniently from 400 to 1300 nm by adjusting the capped fraction of the hydroxyl groups with undecylenic acids. The molecular structures of HPAE-UAs were characterized by means of FT-IR and ¹H-NMR. Then, the effect of the HPAE-UAs on the structures, thermal, and mechanical properties of the wet blue leather were investigated. TEM and SEM demonstrated that the spacing between fibers was enlarged. The thermogravimetric analysis showed that the residual volume of leather could reach up to 30.3 % at about 500 °C. Furthermore, the shrinkage temperature increased to 89.4 °C. It was found that the HPAE-UAs used in leather could improve the thermal performance, physical and mechanical properties. All of these results indicate that HPAE-UAs can be used as a fatliquor with retanning in leather process.     

Influence of crop establishment methods on yield,economics and water productivity of rice cultivars under upland and lowland production ecologies of Eastern Indo-Gangetic Plains

A field study on assessment of crop establishment methods on yield, economics and water productivity of rice cultivars under upland and lowland production ecologies was conducted during wet seasons (June–November) of 2012 and 2013 in Eastern Indo-Gangetic Plains of India. The experiment was laid-out in a split-plot design (SPD) and replicated four times. The main-plot treatments included three crop establishment methods, viz. dry direct-seeded rice (DSR), system of rice intensification (SRI) and puddled transplanted rice (PTR). In sub-plots, five rice cultivars of different groups like aromatic (Improved Pusa Basmati 1 and Pusa Sugandh 5), inbreds (PNR 381 and Pusa 834) and hybrid (Arize 6444) were taken for their evaluations. These two sets of treatments were laid-out simultaneously in two production ecologies, upland and lowland during both years. In general, lowland ecology was found favourable for rice growth and yield and resulted in 13.2% higher grain yield as compared to upland ecology. Rice grown with SRI method produced 19.4 and 7.0% higher grain yield in 2012 and 20.6 and 7.1% higher in 2013, over DSR and PTR. However, PTR yielded 13.1 and 14.5% higher grain over DSR during 2012 and 2013, respectively. On an average, Arize 6444 produced 26.4, 26.9, 28.9 and 54.7% higher grain yield as compared to PS 5, P 834, PNR 381 and IPB1, respectively. Further, the interaction of production ecologies × crop establishment methods revealed that, in upland ecology, SRI recorded significantly higher grain yield as compared to PTR and DSR, but in lowland, grain yield resulting from SRI was similar to the yield obtained with PTR and significantly higher than DSR. The latter two methods (PTR and DSR) yielded alike in lowland ecology in both study years. The production ecologies × crop establishment methods × cultivars interaction on grain yield showed that the growing of Arize 6444 cultivar using SRI method in upland ecology resulted in the higher grain yield (8.87 t/ha). But the cost of production was also highest in SRI followed by PTR and DSR across production ecologies and cultivars. Cultivation of hybrid (Arize 6444) involved higher cost of production than all other cultivars. Irrespective of crop establishment methods and cultivars, gross returns, net returns and B:C ratio were significantly higher in lowland compared to upland ecology. Owing to higher grain yield, SRI method fetched significantly higher gross returns and net returns over PTR and DSR. Average increase in net return with Arize 6444 was 68.8, 41.0, 37.7 and 33.1% over IPB 1, PNR 381, P 834 and PS 5, respectively. There was a saving of 30.7% water in SRI and 19.9% in DSR over PTR under upland ecology. Similarly in lowland ecology, water saving of 30.2% was observed in SRI and 21.2% in DSR over PTR. Due to higher yield and saving on water, SRI returned significantly higher total water productivity (TWP) (5.9 kg/ha-mm) as compared to DSR (3.5 kg/ha-mm) and PTR (3.6 kg/ha-mm) under upland ecology. In lowland ecology, also SRI (6.2 kg/ha-mm) resulted in higher TWP as compared to other two methods. However, DSR gave significantly higher TWP as compared to PTR. Among cultivars, hybrid Arize 6444 recorded the highest TWP in both upland and lowland production ecologies across crop establishment methods. Hence, growing of hybrid Arize 6444 with SRI method can enhance rice productivity and water-use efficiency in lowland and upland production ecologies of Eastern Indo-Gangetic Plains and in other similar regions.     

High water content silk protein-based hydrogels with tunable elasticity fabricated via a Ru(II) mediated photochemical cross-linking method

Silk is very promising in the field of biomaterials as a natural biomacromolecule. Silk protein can be made into various forms of materials, including hydrogels. However, silk protein-based hydrogels have not attracted much attention due to its weak mechanical properties. Here, we report high water content silk protein-based hydrogels with tunable elasticity which were fabricated through Ru(II) mediated photochemically cross-linking tyrosine residues in regenerated silk protein. The regenerated silk protein was characterized by Fourier transform infrared spectroscopy (FTIR). The gelation kinetics of the silk protein was studied by rheology measurements. The compressive mechanical properties of the silk protein-based hydrogels was investigated using compressive tests and dynamic mechanical analysis (DMA). Compressive modulus of the hydrogels reached 349±64 MPa at 15 % strain. The fabricated silk protein-based hydrogels were also characterized by Scanning electron microscopy (SEM), revealing an interconnected porous network structure, typical of hydrogels, with an average pore size of approximately 130 μm. Finally, biocompatibility of the silk protein-based hydrogels was demonstrated through cell culture studies using a human fibroblast cell line, HFL1. The reported silk protein-based hydrogels represent a promising candidate for biomaterial applications.     

Mechanical insights into the effect of fluctuation in soil moisture on nitrous oxide emissions from paddy soil

Paddy fields are subjected to fluctuating water regimes as a result of the alternate drying and wetting water management, which often incurs a sensitive change in N₂O emissions from paddy soils. However, how the soil moisture regulates the emission of N₂O from paddy soil remains uncertain. In this study, three incubation experiments were designed to study the effects of constant and fluctuating soil moisture on N₂O emission and the sources of N₂O emission from paddy soil. Results showed that the N₂O emission from paddy soil at 100 % WHC (water-holding capacity) was higher than that at 40, 65, 80, 120, and 160 % WHC, indicating that 100 % WHC was the optimum soil moisture content for N₂O emission under the incubation experiment. Small peak of N₂O flux appeared when the soil moisture content from 250 % WHC decreased near to 100 % WHC, lower than that triggered by nitrogen (N) fertilization, which was mainly owing to the low NH₄ ⁺ concentration at this period. Nitrification dominated the emissions of N₂O from paddy soil at 250 % WHC (54.96 %), higher than that of nitrification-coupled denitrification (6.74 %) and denitrification (38.3 %). The contribution of denitrification to N₂O emissions (44.10 %) was equivalent to that of nitrification (44.45 %) in soil at 100 % WHC, which was higher than that of 250 % WHC treatment. In conclusion, the finding suggested that the peak of N₂O in paddy soils during midseason aeration could be attributed to the occurrence of optimum soil moisture under sufficient N availability, favorable for the production and accumulation of N₂O.