Optimization of phosphorus content in high plant protein practical diets for Senegalese sole (Solea senegalensis,Kaup 1858) juveniles: influence on growth performance and composition of whole body and vertebrae

Practical diets containing PP sources were elaborated. Increasing levels of di‐calcium phosphate were added to diets leading to five different dietary available P levels: 2.5, 3.2, 6.0, 6.5 and 8.0 g kg^?1 dry diet. The dietary treatments were tested in 13.5 g Senegalese sole juveniles throughout an 82‐day experimental period. Dietary P content had no effect on the productive parameters, while nutrient intake was also similar among dietary treatments, except P intake. Dry matter ADC ranged between 54.9% and 64.0%, and the highest P ADCs value (47.2 ± 0.7%) was achieved in fish fed AP6.0. Dietary phosphorus level significantly influenced body lipid and P compositions. Regression analysis performed on whole‐body P and ash contents fitted to quadratic models. Vertebral bone P content was low but increased significantly with increasing dietary P levels. Bone density and deformities occurrence were, however, similar between experimental conditions. An altered status of bone formation–resorption processes in soles fed the lowest P content diet might be inferred from ALP and TRAP activities. In conclusion, overall results state a high tolerance of Senegalese sole to low P content diets and support the utilization of practical diets with high plant protein content.     

Characterization of the surface properties of cellulosic fibers in fibrous and ground forms by IGC and contact angle measurements

Surface properties of fibrous and ground cotton and linen were investigated by inverse gas chromatography (IGC) and the contact angle with different liquids was also measured on fabrics composed of both fibers. Results proved that dispersion component of surface tension (γ _s ^d ) determined by IGC depends not only on the surface energy, but also on several factors influencing the adsorbability of probe molecules on the cellulosic substrates. For cotton samples, the trapping of n-alkanes among waxy molecules in the outer layer of fibers can be presumed. This effect results in larger γ _s ^d for cotton fibers than for linen in spite of the higher wettability of the linen fabrics. Besides the surface energy and trapping effects, the grinding also influences the γ _s ^d values. Specific enthalpy of adsorption (ΔH _A ^ab ) of polar probes could be determined on all linen samples, but only on the ground cotton sample. Lewis acid-base character calculated for linen and ground cotton samples depends on the same effects as the γ _s ^d does. The similar ΔH _A ^ab values of chloroform (acidic) and THF (basic) measured on each of the samples support the conclusion that the surface character is amphoteric, which is also proved by the high ΔH _A ^ab values of the amphoteric ethyl acetate and acetone probes.     

UV-visible spectroscopic investigation of the 8,8-methylmethine catechin-malvidin 3-glucoside pigments in aqueous solution: structural transformations and molecular complexation with chlorogenic acid

The physicochemical properties of 8,8-methylmethine catechin-malvidin 3-O-glucoside isomers, commonly referred to as catechin-ethyl-malvidin 3-O-glucoside, have been studied in aqueous solutions and compared with those of the parent anthocyanin (malvidin 3-O-glucoside). The hydration and acidity constants (pKh and pKa) of the catechin-ethyl-malvidin 3-O-glucoside pigments and malvidin 3-O-glucoside were determined by UV-visible spectroscopic measurements. The ethyl-linked catechin-malvidin 3-O-glucoside pigments present higher stability toward hydration than the parent anthocyanin. The high resistance of these ethyl-linked pigments toward the hydration is related to the self-association that offers optimal protection from the nucleophilic attack of water. Moreover, the ethyl link may confer to the molecule enough flexibility to undergo intramolecular interaction, further protecting it from hydration and bisulfite discoloration. In the wine pH range (3.2-4.0), due to the low pKa and high pKh values, the ethyl-linked pigments are present as colored forms (flavylium cation and quinonoid bases).     

Dialkyl 3,3'-thiodipropionate and dialkyl 2,2'-thiodiacetate antioxidants by lipase-catalyzed esterification and transesterification

Medium- and long-chain dialkyl 3,3'-thiodipropionate antioxidants such as dioctyl 3,3'-thiodipropionate, didodecyl 3,3'-thiodipropionate, dihexadecyl 3,3'-thiodipropionate, and di-(cis-9-octadecenyl) 3,3'-thiodipropionate were prepared in high yield by lipase-catalyzed esterification and transesterification of 3,3'-thiodipropionic acid and its dimethyl ester, respectively, with the corresponding medium- or long-chain 1-alkanols, i.e., 1-octanol, 1-dodecanol, 1-hexadecanol, and cis-9-octadecen-1-ol, in vacuo (80 kPa) at moderate temperatures (60-80 degrees C) without solvents. Immobilized lipase B from Candida antarctica (Novozym 435) was the most active biocatalyst for the preparation of medium- and long-chain dialkyl 3,3'-thiodipropionates showing enzyme activities up to 1489 units/g, whereas the immobilized lipases from Rhizomucor miehei (Lipozyme RM IM) and Thermomyces lanuginosus (Lipozyme TL IM) were by far less active ( approximately 10 enzyme units/g). Maximum conversions to dialkyl 3,3'-thiodipropionates were as high as 92-98% after 4 h of reaction time. Similarly, dihexadecyl 2,2'-thiodiacetate was prepared in high yield using 2,2'-thiodiacetic acid or diethyl 2,2'-thiodiacetate and 1-hexadecanol as the starting materials and Novozym 435 as the biocatalyst.     

Novel application of square-wave adsorptive-stripping voltammetry for the determination of xanthohumol in spent hops

This paper reports the development of a novel electrochemical assay for xanthohumol (XN) by square-wave adsorptive-stripping voltammetry (SWAdSV) with a hanging mercury drop electrode. The method showed good repeatability (CV < 2%) and linearity (between 10 and 250 μg L(-1)), as well as suitable limits of detection (2.6 μg L(-1)) and quantification (8.8 μg L(-1)). The method was applied for the quantification of this compound in spent hops, and the results obtained were compared with the HPLC-UV method. XN contents determined by the SWAdSV method were 16 ± 1 and 100 ± 4 μg L(-1) for aqueous and methanolic extracts, respectively. The developed new methodology considerably reduces the analysis time, approximately from 25 min (HPLC-UV method) to 7 min, enabling a high sample throughput. In addition, the detection and quantification limits were approximately 5-fold lower than those obtained with the chromatographic method.     

Reactions of anthocyanins and tannins in model solutions

The reaction between procyanidin dimer Ec-EcG (B2 3'-O-gallate) and malvidin 3-O-glucoside (Mv3glc) was studied in a model solution system at two different pH values, 2.0 and 3.8. Disappearance of both species was much faster at pH 3.8 than at pH 2.0. That of Mv3glc was increased in the presence of Ec-EcG, whereas that of Ec-EcG was the same in the presence or absence of the anthocyanin. Values of absorbance at 520 nm measured at pH 2.0 were correlated with the amount of residual Mv3glc. Those measured at pH 3.8 hardly changed during the incubation, but absorbance values at 420 and 620 nm as well as resistance to sulfite bleaching were much increased, confirming that Mv3glc was converted to other pigments. Anthocyanin-flavanol adducts were observed at both pH values, but their structures were different. At pH 2.0, cleavage of the procyanidin linkage followed by nucleophilic addition of flavanol or anthocyanin moieties led to (Ec)(n)-EcG and (Ec)(n)-Mv3glc, respectively. At pH 3.8, nucleophilic addition of Ec-EcG onto the anthocyanin yielded Mv3glc-(Ec-EcG).     

Definition of priority areas for forest conservation through the ordered weighted averaging method

The general objective of this study was to evaluate the ordered weighted averaging (OWA) method, integrated to a geographic information systems (GIS), in the definition of priority areas for forest conservation in a Brazilian river basin, aiming at to increase the regional biodiversity. We demonstrated how one could obtain a range of alternatives by applying OWA, including the one obtained by the weighted linear combination method and, also the use of the analytic hierarchy process (AHP) to structure the decision problem and to assign the importance to each criterion. The criteria considered important to this study were: proximity to forest patches; proximity among forest patches with larger core area; proximity to surface water; distance from roads; distance from urban areas; and vulnerability to erosion. OWA requires two sets of criteria weights: the weights of relative criterion importance and the order weights. Thus, Participatory Technique was used to define the criteria set and the criterion importance (based in AHP). In order to obtain the second set of weights we considered the influence of each criterion, as well as the importance of each one, on this decision-making process. The sensitivity analysis indicated coherence among the criterion importance weights, the order weights, and the solution. According to this analysis, only the proximity to surface water criterion is not important to identify priority areas for forest conservation. Finally, we can highlight that the OWA method is flexible, easy to be implemented and, mainly, it facilitates a better understanding of the alternative land-use suitability patterns.