Multi-scale impacts of urbanization on species distribution within the genus Tetramorium

Landscape Ecology - Urbanization is a global change which deeply impacts landscapes. Long studied through transects along urbanization gradients, ecological response to urbanization can now be...     

Long-term prospective evaluation of intestinal anastomosis using stainless steel staples in 14 dogs

This prospective clinical study evaluated the use, complications, and clinical and ultrasonographic follow-ups of end-to-end intestinal anastomoses with skin staples in naturally occurring diseases in canine small and large intestines. Intestinal anastomoses were performed in 14 dogs and pre-, peri-, and postoperative data were recorded. Postoperative clinical and ultrasound evaluations were performed at regular intervals for 1 year. The mean time taken to construct the anastomosis was 5 min. There were no intraoperative complications. Hemorrhage and colonic stricture were the main postoperative complications. Staple loss occurred in 2 cases. Absence of wall layering and focal wall thickening were observed in all cases at each ultrasonographic follow-up. Hyperechoic fat was observed in all but 1 of the cases at month 1. Nine dogs were alive with normal digestive function at the end of the study. The skin stapler technique enabled rapid construction of consistent anastomoses with inexpensive stapling material.     

Effect of Scleroderma Spore Density and Age on Mycorrhiza Formation and Growth of Containerized Eucalyptus globulus and E. urophylla Seedlings

Greenhouse trials with containerized Eucalyptus globulus and E. urophylla seedlings were made to determine effective inoculum spore densities (Scleroderma cepa from temperate Australia, and S. citrinum from sub-tropical China) and spore storage conditions (fresh spores or spores stored for 5 years at room temperature or at 4 °C; S. albidum, S. areolatum and S. cepa from Western Australia). Inoculation with 10⁶ or 10⁸ spores/seedling increased eucalypt growth by up to 46% in height and 42% in dry weight compared to non-inoculated seedlings at 12 weeks after inoculation. Mycorrhizal formation was poor at 10² spores/seeding. Spores stored at 4 °C for 5 years were as effective in forming mycorrhizas as freshly collected spores when a standard density of 10⁶ spores/seedling was applied. It is recommended that spore densities ≥10⁴ be used for inoculation of containerised eucalypts and that spores be stored at 4 °C until use.     

Chemical modification and wetting of medium density fibreboard panels produced from fibres treated with maleated polypropylene wax

Medium density fibreboard (MDF) was produced from fibres treated with maleated polypropylene wax. The objectives of this study were to investigate the effect of fibre treatment with maleated polypropylene wax on the advancing and receding contact angle and wicking of MDF panels by the Wilhelmy plate method; to verify the chemical reactions occurring between fibres and maleated polypropylene wax by infrared spectroscopy, and to verify if there are relationships with the water absorption of panels. Three maleated polypropylene wax contents (0, 3, 5%) and two resin types (urea–formaldehyde, UF and melamine–urea–formaldehyde, MUF) were considered in this study. Our results showed that the treatment increased the advancing contact angle of panels bonded with UF resin. The receding contact angles of MDF panels produced from treated fibres with 5% maleated polypropylene wax content were also increased by the treatment. Also, the wicking was reduced by the treatment independent of the maleated polypropylene wax content. Reductions of the wicking were 59% for panels bonded with UF resin and 73% for panels bonded with MUF. Relationships between the wicking and water absorption were observed. Chemical analysis realized by infrared spectroscopy did not detect the presence of an esterification reaction between wood fibres and anhydride groups of the maleated polypropylene wax. This suggests, therefore, that an esterification reaction did not take place or that chemical modifications were so small that they are not visible by infrared spectroscopy.     

Spatial patterns of shrub cover after different fire disturbances in the Pyrenees

? Woody encroachment into grasslands is a worldwide phenomenon. In the Pyrenees, fire has been used as a management tool to transform part of the encroached land to grassland.

? This study aims to compare the spatial patterns of shrub cover 4 y after 4 different fire disturbances (prescribed burning, repeated prescribed burning, wildfire in 20 year-old shrubs and wildfire in 5 year-old shrubs); and also to compare shrub cover after different fire disturbances, accounting for spatial autocorrelation. The study focuses on the shrub Cytisus balansae. Two-dimensional transects (20 × 0.5 m) were established to monitor shrub cover for 4 y after each disturbance type. Autoregressive models and Markov models were used with a Monte Carlo procedure to account for the presence of spatial autocorrelation.

? Shrub cover was greater after prescribed burning than after repeated prescribed burning, and it increased with shrub age before disturbance. Differences in spatial patterns were detected in shrub patch size, with repeated prescribed fires and wildfires reducing shrub patch size by half in comparison with prescribed burning.

? From the management point of view, the effects of repeated prescribed burning were similar to those of a wildfire on reducing shrub cover and shrub patch size.

     

Leaf photosynthetic characteristics of beech (Fagus sylvatica) saplings during three years of exposure to elevated CO(2) concentration

Beech (Fagus sylvatica L.) seedlings were cultivated from seeds sown in pots or directly in the ground in outdoor chambers that were transparent to solar radiation, and provided either ambient air or CO(2)-enriched air (ambient + 350 &mgr;mol mol(-1)). The rooting volume was high in all experiments. In the short-term experiment, potted plants were assigned to a factorial CO(2) x nutrient treatment (optimal nutrient supply and severe nutrient shortage) for 1 year. In the long-term experiment, plants were grown directly in the ground and received an optimal supply of water and nutrients in both CO(2) treatments for 3 years. Nutrient stress caused carboxylation capacity (V(m)) to decrease in the potted seedlings exposed to CO(2)-enriched air during their first growing season. In the long-term experiment with optimal nutrient supply, CO(2)-enriched air did not affect V(m), but caused an upward acclimation of maximum electron transport rate (J(m)). Consequently, there was a 14% increase in the J(m)/V(m) ratio, indicating nitrogen reallocation to maintain an equilibrium between RuBP consumption and RuBP regeneration. Both V(m) and J(m) decreased during the growing season in both CO(2) treatments. Although upward acclimation of J(m) was no longer apparent at the end of the third growing season, plants in CO(2)-enriched air maintained a higher J(m)/V(m) ratio than plants in ambient air, indicating that photosynthetic acclimation always occurred. Second flush leaves appeared during each growing season. When expressed on the basis of foliar nitrogen concentration, their photosynthetic characteristics (V(m) and J(m)) were enhanced compared with other leaves. Because the number of second flush leaves was also increased in the elevated CO(2) treatment, this response should be taken into account when modeling the effects of elevated CO(2) concentration on canopy photosynthesis. Stomatal conductance decreased in response to atmospheric CO(2) enrichment; however, the stomatal response to irradiance followed a single relationship based on two stomatal conductance models.     

Comparison of physical and mechanical properties of tension and opposite wood from ten tropical rainforest trees from different species

On 10 trees from 10 species of French Guyana tropical rainforest in a clear active process of restoring verticality growth strains were measured in situ in order to determine the occurrence of tension wood within samples. Wood specimens were cut in the vicinity of the growth strains measurements in order to measure some mechanical and physical properties. As suspected, tensile growth strains was very much higher in tension wood zone, because longitudinal modulus of elasticity was slightly higher. Longitudinal shrinkage was also much higher in tension wood than in opposite wood.     

Phenol-formaldehyde resin curing and bonding under dynamic conditions

Summary To better understand the curing and bonding behavior of phenol-formaldehyde (PF) resin under dynamic conditions, flakeboards were manufactured either by conventional pressing at 7% or 12% mat moisture content or by steam injection pressing with 10 or 20 seconds steaming duration. Resin-impregnated glass-cloth samples and lap-shear tension specimens were embedded in the core of each flakeboard. After the flakeboards were pressed for various periods of times, the samples and specimens were quickly retrieved. The degree of resin cure was determined on the resin-impregnated glass-cloth samples by dynamic mechanical analysis. The bond strengths were measured from the lap-shear tension specimens on a mechanical testing machine. The results of resin curing and bonding were then correlated to the performance of the resin-bonded boards, which were evaluated by internal bond, modulus of rupture, modulus of elasticity, and thickness swelling. Resin curing and lap-shear bonding did not proceed simultaneously. In conventional pressing, the mat moisture content (MC) at 12% favored resin curing, but slightly retarded lap-shear bonding, as compared to 7%MC. In steam injection pressing, the rates of resin curing and lap-shear bond strength development were much faster for 20 seconds than for 10 seconds of steaming duration. Longer press times were needed to obtain boards with maximum strength in the 12%MC conventional pressing and the 20-s steam duration steam injection pressing than in those conditions where moisture content was lower or steam time was less. The need for longer press times must be attributed to higher internal vapor pressures and/or lower wood and resin component strengths, rather than to incomplete cure or bonding.This material is based on work supported by the Ministry of International Affairs, Quebec Government, the Natural Sciences and Engineering Research Council of Canada, and Laval University (Quebec City). The work was also supported by the U.S. Department of Agriculture under research joint venture agreement FP-92-1835     

The effects of temperature and humidity on phenol-formaldehyde resin bonding

Summary The effects of temperature and relative humidity on phenol-formaldehyde resin bonding were evaluated. Two flakes in a lap-shear configuration were bonded under an environment of controlled temperature (110 °C, 120 °C, 130 °C, 140 °C) and relative humidity (41%, 75%, 90%) for a series of time periods (0.25 to 16 min). The lap-shear specimens were then shear-tested on a mechanical testing machine and the results were used to establish a family of bond strength development curves at each temperature and level of relative humidity. At 110°C, the higher relative humidity appeared to retard resin bonding. The effects of relative humidity diminished as temperature increased to 140 °C. Bond strength development was chemical ratecontrolled. The rate of bond strength development at each relative humidity follows a first order reaction mechanism. The activation energy of resin-wood bonding, determined by bonding kinetics, was higher than that of resin alone, determined by differential scanning calorimetry. This comparison indicates that to form a strong resin-wood bond, a higher energy level might be required.This material is based on work supported by the Ministry of International Affairs, Quebec Government, the Natural Sciences and Engineering Research Council of Canada, and Laval University (Quebec City). The work was also supported by the U.S. Department of Agriculture under research joint venture agreement FP-92-1835