A two-year comparison on nutritive value and yield of eight lucerne cultivars and one red clover cultivar

Red clover (Trifolium pratense) and lucerne (Medicago sativa) are among the most common legume species used for ruminant feeding systems. Besides the greater nutritive quality and first-year ley yield compared to lucerne, red clover decreases its yield over the years. However, under unfavourable soil conditions the persistency of lucerne can be compromised, not performing as expected. This study compared yield and chemical composition of eight lucerne cultivars and one tetraploid red clover cultivar, with similar growth capacity as lucerne, replicated over two years. In the second year, four lucerne cultivars and the red clover cultivar were analysed for crude protein (CP) fractions, dry matter and neutral detergent fibre (NDF) digestibility. A randomized block design was used with three field blocks per cultivar for the multiple comparisons within each year. There were differences in DM yield, concentrations of CP and NDF and CP fractions among the lucerne cultivars, but the differences were inconsistent between years and between growth cycles within year. The red clover cultivar had lower CP and NDF concentrations than a majority of the lucerne cultivars, and greater in vitro organic matter digestibility compared to all of the lucerne cultivars. Also, the red clover cultivar had greater rumen undegradable-to-degradable CP ratio but confirmed its lower yield persistency compared to the lucerne cultivars.     

Linking watershed and microhabitat characteristics: effects on production of Atlantic salmonids (Salmo salar and Salmo trutta)

The spatial scale of environmental factors influencing population dynamics ranges from microhabitat to continental or even global scales. Integration of multiple spatial scales is important in order to understand links between environmental variation and population processes. In the present study, we investigate how multiscale drivers influence the production of stream‐rearing Atlantic salmonids (Atlantic salmon, Salmo salar L. and brown trout, Salmo trutta L.) measured in terms of abundance. Variation in juvenile production was studied using data from single‐pass electrofishing surveys (measured as biomass per m²) from nine rivers. These data were combined with habitat data ranging from an important in‐stream microhabitat variable (shelter availability) to properties of the catchment. Variation in productivity within and among rivers was affected by both properties of in‐stream habitat and catchment properties. Shelter availability and the proportion of the catchment consisting of cultivated land and lakes influenced biomass positively, while catchment area had the opposite effect. For a different set of rivers (N = 20), river gradient and catchment area were shown to positively affect the amount of shelter. Finally, the variables identified in the two preceding analysis were included in the analysis of population productivity using catch statistics from 160 rivers. The proportion of cultivated land and lakes, estimated shelter availability were found to have positive effects. In addition, temperature had a positive effect, while river width had a negative effect. This study shows that combining multiple‐scale environmental factors can explain a substantial proportion of variation in population productivity among and within the populations of Atlantic salmonids.     

A landscape and policy perspective on forest conversion: Long-tailed tit (<Emphasis Type="Italic">Aegithalos caudatus</Emphasis>) and the allocation of deciduous forests in southern Sweden

As resources allocated specifically for conservation are limited, there is a need to ensure conservation policy initiatives lead to effective conservation outcomes. In this study, we investigated the potential conservation benefits from alternative spatial allocations of old deciduous stands to a landscape dominated by coniferous production forests owned primarily by non-industrial private forest owners. As a target species, we used the long-tailed tit (Aegithalos caudatus), a species associated with deciduous forests and known to be sensitive to isolation. We used a previously published model based on empirical data on the occurrence of this species, to assess the probability of occurrence of the bird in a 4,000 km² area in southern Sweden for which we possess detailed spatial GIS data (kNN data) of tree species composition and age. We assessed alternative scenarios where old deciduous forest was allocated with or without respect to distance from existing old deciduous forests. Due to the long-tailed tit’s habitat requirement increasing the amount of old deciduous forests close to existing habitats was the most effective strategy. However, the potential advantages of this strategy may in fact be overturned in favor of the other scenarios if ownership structures and probable uptake rates of policy initiatives are also considered. If a policy initiative is targeted toward owners with properties in close proximity to existing suitable habitat, when compared to if all forest owners are targeted, a higher proportion of owners is needed to participate in order to achieve the same degree of habitat creation for the species. Here, we discuss the potential benefits for effective conservation policy formulation from integrating spatially explicit datasets and detailed ecological knowledge with land-ownership structures and policy uptake scenarios.     

Preparation of Polyurethane Silicon Oxide Nanomaterials as a Binder in Leather Finishing

Leather finishing processes using toxic organic solvent based produce volatile organic compounds (VOC), chronic exposure to this chemicals effect on workers' health causing many diseases especially lung cancer. So, polyurethane waterbased was synthesized for application in leather finishing instead of organic solvent based because it’s economic and safety for industry and workers. Preparation of water-based polyurethane (PU) depends on the reaction of polyethylene glycol (PEG, 300) with isophorone diisocyanate (IPDI) and the reaction of IPDI-1,4-butanediol (BDO) together with dimethylolpropionic acid (DMPA), was synthesized by poly-addition polymerization reaction. PU was then modified with different amounts of silicon dioxide nanoparticles (1-5 % SiO₂), used as a binder in leather finishing. Leather coated was characterized physically, chemically and thermally by FTIR, GPC, DLS, TEM, SEM and TGA. The results revel that, water vapor permeability (WVP) of leather coated with PU modified with SiO₂ showed improvement due to the existence of SiO₂ particles which increases the interspaces of the polyurethane coating. SEM showed that when the amount of SiO₂ nanoparticles increases, there is uniform nanoparticles accumulated can be observed. EDX prove the presence of Si and O₂ elements and the formation of SiO₂ nanoparticles. Mechanical properties discussed that tensile strength; tear strength and elongation at break % increase with increase SiO₂ concentration until 3 % SiO₂ nanoparticles. TGA showed an improvement of thermal stability of coated leather modified with SiO₂. Therefore, this study succeeded in preparation of safe, ecofriendly of water-based polyurethane binders which modified with SiO₂ for using in leather finishing.     

Unequal deployment of clones to seed orchards by considering genetic gain, relatedness and gene diversity

Related clones in seed orchards lead to inbreeding depressionand reduced genetic value of the seeds. This study aims to developthe methodology for deployment of related clones to seed orchardswhen the breeding value and the pedigree are available for eachcandidate. The following goals were considered: high geneticgain, high genetic gain adjusted for predicted inbreeding depression(net gain), high gene diversity, and high effective clone number.The selection strategies included truncation selection withor without relatedness restrictions, maximizing genetic gain(linear deployment) with or without restrictions on relatednessand maximizing net gain. The selection strategies were appliedto Norway spruce seed orchard candidates evaluated in clonaltests. The material comprised full-sib and half-sib relationships.Comparisons were made both at the same gene diversity and atthe effective clone number. Maximizing net gain by unequal rametnumber deployment resulted in considerable higher net gain anda considerable reduction of related ramets in many comparisons.Linear deployment restricted against related clones comparedat the same status number resulted in almost as high net gain.Reduction in gene diversity may be a more important reason toavoid relatives in seed orchards than the subsequent inbreedingfor achieving a high net gain.     

Finite element study of growth stress formation in wood and related distortion of sawn timber

Lack of straightness in timber is the most frequent complaint regarding solid (and laminated) timber products worldwide. Nowadays, customers demand higher quality in the shape stability of wood products than they did earlier. The final distortion of timber boards is mostly caused by moisture-related stresses in wood (drying distortions) and growth-related stresses (distortions appearing when logs are split up to timber boards by sawing). To get more knowledge on how these distortions can be reduced in wooden products, there is a need for improved understanding of this material behaviour through good numerical tools developed from empirical data. A three-dimensional finite element board distortion model developed by Ormarsson (Doctoral thesis, Publ. 99:7, 1999) has been extended to include the influence of growth stresses by incorporating a one-dimensional finite element growth stress model developed here. The growth stress model is formulated as an axisymmetric general plane strain model where material for all new annual rings is progressively added to the tree during the analysis. The simulation results presented include how stresses are progressively generated during the tree growth, distortions related to the redistribution of growth stresses during log sawing, and distortions and stresses in drying reflecting the effects of growth stresses. The results show that growth stresses clearly vary during tree growth and also form a large stress gradient from pith to bark. This in itself can result in significant bow and crook deformations when logs are sawn into timber boards. The distortion results from the simulations match well with the results observed in reality. The parametric study also showed that the radial growth stress distribution is highly influenced by parameters such as modulus of elasticity, micro fibril angle and maturation strain.     

An hypothesis on the control of food intake in fish

An hypothesis on the control of voluntary food intake (appetite) in fish is presented. According to the hypothesis, only two parameters are necessary to design a feeding regime which might result in maximum growth of fish in an aquaculture system. The necessary parameters are maximum voluntary food intake in one meal, and evacuation rate of the stomach. This hypothesis is discussed in relation to empirical data.     

Temperature responses,flowering and fruit yield of the June-bearing strawberry cultivars Florence,Frida and Korona

The effect of night temperature on short day (SD) floral induction has been studied in three June-bearing strawberry cultivars of different geographic origin and compared with yield performance in the cool Nordic environment. At the optimum day temperature of 18 °C, the SD flowering response of the cultivars ‘Florence’ and ‘Korona’ increased significantly with increasing night temperature from 9 to 18 °C, while an optimum was reached at 15 °C in the cultivar ‘Frida’ that is selected under cool-environment conditions in Norway. Also, while saturated flowering response was obtained with 3 weeks of SD treatment at all temperatures in ‘Frida’, several plants of ‘Florence’ and ‘Korona’ failed to initiate flowers at 9 °C night temperature even with 5 weeks of SD. The effect of extended SD period was particularly pronounced in ‘Florence’. The slow SD floral induction response of ‘Florence’ was associated with a 2 week delay of anthesis in subsequent long day (LD) conditions at 21 °C. Yield performance of the same cultivars during 2 years under field conditions at Nes Hedmark and in North Norway also demonstrated that the yield potential of ‘Florence’ was not realized under the climatic conditions prevailing at these locations. In both years the yields varied significantly among the cultivars, ‘Frida’ having the highest yields followed by ‘Korona’, with ‘Florence’ far below. It is concluded that, in the Nordic environment, autumn (September) night temperatures are obviously sub-optimal for yield performance of some June-bearing strawberry cultivars, and that this effect is mediated by autumn temperature effects on flower initiation responses.