Increased proportions of CCR4+ cells among peripheral blood CD4+ cells and serum levels of allergen-specific IgE antibody in canine chronic rhinitis and bronchitis

Canine chronic rhinitis (CR) and bronchitis (CB) are suspected to be allergic diseases. The present study tested whether dogs diagnosed with CR or CB present an atopic predisposition based on the ratio of CC chemokine receptor 4 (CCR4)-positive cells among peripheral blood CD4-positive cells (CCR4/CD4) and the serum levels of allergen-specific IgE antibodies. We found that most dogs with CR and CB have a possibility of atopic predisposition, and macrolide therapy constitutes an alternative to corticosteroid therapy in controlling the clinical signs.     

Tooth brushing inhibits oral bacteria in dogs

In this study, scaling, polishing and daily tooth brushing were performed in 20 beagle dogs, and the number of oral bacteria was determined using a bacterial counter. The dogs were randomized into the scaling (S), scaling + polishing (SP), scaling + tooth daily brushing (SB) and scaling + polishing + tooth daily brushing (SPB) groups. Samples were collected from the buccal surface of the maxillary fourth premolars of the dogs immediately after scaling and every week thereafter from weeks 1 to 8. Throughout the study, the number of bacteria was significantly lower in the SB and SPB groups compared with the S group. The findings suggest that daily tooth brushing inhibited oral bacterial growth in the dogs.     

Methylation of free-floating deoxyribonucleic acid fragments in the bronchoalveolar lavage fluid of dogs with chronic bronchitis exposed to environmental tobacco smoke

Background

The etiology of canine chronic bronchitis (CB) is not completely understood, although exposure to environmental tobacco smoke (ETS) affects the airway inflammatory responses in some dogs with CB. The mechanism by which this occurs is unknown.

Findings

We investigated the concentrations and methylation rates of free-floating DNA fragments in bronchoalveolar lavage fluid (BALF) from dogs with chronic bronchitis. Based on serum cotinine levels, dogs with CB were divided into 2 groups: dogs that either had or had not been exposed to ETS. Our results demonstrated that the total nucleated cell and macrophage numbers increased in BALF of ETS-exposed dogs with CB. There were no significant differences in DNA concentrations and methylation rates in BALF between the 2 groups. However, 3 out of 8 dogs exposed to ETS had high DNA methylation rates in their BALF samples.

Conclusion

Our results suggest that ETS exposure leads to epigenetic modifications of cellular components in BALF in dogs diagnosed with CB.     

Pharmacokinetics of metoclopramide in calves with renal dysfunction

To clarify the effect of renal dysfunction on pharmacokinetics of the prokinetic agent metoclopramide (MCP), we administered intravenously 0.4 mg/kg MCP to healthy calves and calves subjected to right kidney vessel ligation (ligation) without or with a subsequent left nephrectomy (ligation plus removal). Plasma MCP concentration, glomerular filtration rate (GFR) and plasma prolactin level were measured by liquid chromatography-tandem mass spectrometry, simplified equation using iodixanol and enzyme-linked immunosorbent assay, respectively. Only in calves with ligation plus removal, plasma MCP concentrations were increased significantly 6, 8 and 12 hr after injection, showing that a negative correlation was observed between the plasma MCP concentrations and GFR value. A tendency to increase in plasma PRL concentration was noted also in these calves. In conclusions, plasma MCP concentrations depend on the GFR mode in calves, and its critical GFR value was estimated.     

Effects of food enriched with egg yolk hydrolysate (bone peptide) on bone metabolism in orchidectomized dogs

We examined the effects of chicken egg hydrolysate (also known as “bone peptide” or BP) on bone metabolism in 5- to 8-month-old orchidectomized dogs. The bone formation marker serum bone alkaline phosphatase (BAP) and the bone resorption marker urine deoxypyridinoline (DPD) were used as indicators to measure changes in bone metabolism. The following results were observed that Serum BAP was higher in dogs fed BP-enriched food throughout the clinical investigation. Serum BAP was statistically significantly higher in dogs fed BP-enriched food than in dogs fed non-BP-enriched food at 2 months after orchidectomy. This suggests that BP promoted bone formation immediately after orchidectomy.     

Effect of a single injection of gonadotropin-releasing hormone (GnRH) and human chorionic gonadotropin (hCG) on testicular blood flow measured by color doppler ultrasonography in male Shiba goats

Although color Doppler ultrasonography has been used to evaluate testicular blood flow in many species, very little has been done in goat. Eight male Shiba goats were exposed to a single intramuscular injection of either gonadotropin-releasing hormone (GnRH group; 1 µg/kg BW) or human chorionic gonadotropin (hCG group; 25 IU/kg BW). Plasma testosterone (T), estradiol (E2) and inhibin (INH) were measured just before (0 hr) and at different intervals post injection by radioimmunoassay. Testis volume (TV) and Doppler indices, such as resistive index (RI) and pulsatility index (PI) of the supratesticular artery, were measured by B-mode and color Doppler ultrasonography, respectively. The results indicated an increase in testicular blood flow in both groups, as RI and PI decreased significantly (P<0.05), but this increase was significant higher and earlier in hCG group (1 hr) than in the GnRH group (2 hr). A high correlation was found for RI and PI with both T (RI, r= −0.862; PI, r= −0.707) and INH in the GnRH group (RI, r=0.661; PI, r=0.701). However, a significant (P<0.05) correlation was found between E2 and both RI (r= −0.610) and PI (r= −0.763) in hCG group. In addition, TV significantly increased and was highly correlated with RI in both groups (GnRH, r= −0.718; hCG, r= −0.779). In conclusion, hCG and GnRH may improve testicular blood flow and TV in Shiba goats.     

Genotype by environment interactions (GEIs) for barley grain yield under salt stress condition

Changes in the relative genetic performance of genotypes across environments are referred to as genotype × environment interactions (GEIs). GEIs can affect barley breeding improvement for salt tolerance because it often complicates the evaluation and selection of superior genotypes. The present study evaluated the GEIs over 60 barley genotypes for yield components and grain yield in six salinity environments in North Delta, Egypt. Data were analyzed using the additive main effects and multiplicative interaction (AMMI) and Tai’s stability parameters. GEIs effects on yield explained 20.3, 20.1, 14.6, and 33.0% of the total variation besides, the first two principal components account for 67.3, 56.3, 64.3, and 83.7% of the explained variance in the four sets, respectively. Six genotypes namely G-4, G-7, G-20, G-34, G-36, and G-39 were found to be most stable and high yielding across environments (GY >2.00 t ha^-1), and located close to zero projection onto the AEC ordinate. Tai’s stability parameters demonstrated that these genotypes were more responsive to the environmental changes. The genotypes G-50 and G-53 showed perfect/static stability (α = -0.95, -0.91, respectively). In contrast, the genotype; G-36 had α = 0 and λ = 1.10, indicating parallel with the environmental effects followed by G-44. Overall, we found that GEIs for grain yield are highly significant in all sets, suggesting that responded differently across environments. This interaction may be a result of changes in genotypes’ relative performance across environments, due to their differential responses to various abiotic factors.     

Epidemiological study on <Emphasis Type="Italic">Lactococcus garvieae</Emphasis> isolates from fish in Japan

In Japan, Lactococcus garvieae infection has been the main fish disease in aquaculture. Although commercial oral and injectable vaccines have been used to prevent L. garvieae infection in Japan, L. garvieae has been isolated not only from unvaccinated fish but also from vaccinated fish in which immunity induced by vaccination had diminished. In order to obtain epidemiological information on this fish pathogen, we conducted biased sinusoidal field gel electrophoresis (BSFGE) pattern analysis and phage typing of L. garvieae isolates (n = 427) from fish in Japan. These isolates were obtained from 13 different fish species between 1980 and 2007. In the BSFGE analysis, L. garvieae isolates were classified into 17 groups (S1–S17) based on the SmaI digestion patterns and into four groups (A1–A4) based on the ApaI digestion patterns. Phage typing revealed five different phage susceptibility profiles (A–E) in L. garvieae isolates. Since 2005, comparisons of the results of phage typing and BSFGE have indicated the presence of a novel genotype (S16/A4) with phage type E. All the strains belonging to this type showed lincomycin sensitivity.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.