The Effect of Methanolic Valeriana officinalis Root Extract on Adipocyte Differentiation and Adiponectin Production in 3T3-L1 Adipocytes

Plant Foods for Human Nutrition - Adipose tissue is an endocrine organ and its endocrine function is closely associated with type 2 diabetes mellitus. Valeriana officinalis (Valerian) exerts some...     

Maize defence mechanisms against the European corn borer,Ostrinia nubilalis Hübner (Lepidoptera: Crambidae)

Maize is arguably the most widely grown crop in the world, but it is often associated with one of its major insect pests, the European corn borer (ECB). The damage caused by this species to maize production is generally variable, but in many cases it is economically significant. This review paper provides an overview of the research findings on the natural plant defence mechanisms against ECB larvae published till now. What is resistance and how it is achieved, what is the chemical response of maize plants to insect feeding and how tolerance can be increased. A short introduction in breeding for resistance and a discussion if the mentioned traits can be used in conventional breeding in order to create maize hybrids less affected by ECB are given.     

Fatigue of structural plywood under cyclic shear through thickness I: fatigue process and failure criterion based on strain energy

The fatigue behavior of plywood specimens under shear through thickness was examined on the basis of strain energy to obtain common empirical equations for the fatigue process and failure criterion under various loading conditions. Specimens were cut from commercial plywood panels of 9-mm thickness. Loading conditions were set as follows: a square waveform at a loading frequency of 0.5 Hz, a triangular waveform at 0.5 Hz, and a triangular waveform at 5.0 Hz. Peak stress applied was determined to be 0.5, 0.7, and 0.9 of static strength, that is, stress levels of 0.5, 0.7, and 0.9. The stress-strain relationships were measured throughout the fatigue test, and the strain energy was obtained at each loading cycle. Loading conditions apparently affected the relationship between stress level and fatigue life. On the other hand, the relationship between mean strain energy per cycle and fatigue life was found to be independent of loading conditions. Mean strain energy per cycle obtained as the fatigue limit was 5.85 kJ/m³ per cycle. Assuming that the accumulation of strain energy is a fatigue indicator, the fatigue process and failure criterion for the plywood specimens under the three loading conditions were commonly expressed by the relationship between cumulative strain energy and loading cycles.     

Differential overstory leaf flushing contributes to the formation of a patchy understory

Understory individuals were found to form patches in a 100-year-old deciduous broad-leaved forest. The closed forest canopy was uniform, and so the light conditions at various locations across the forest floor differed little after the leaf flush of the overstory. To explain the distribution pattern in the understory, a hypothesis was proposed: in spring, the forest floor is divided into patches according to the timing of leaf flush of the overstory individuals, and the light conditions are more favorable for understory plants under the crowns of trees with later-flushing leaves. In the plot, three groups of early, intermediate, and late, were recognized in the overstory concerning the timing of leaf flush. As for the start of leaf flush, a difference of 31.6 days was recognized among tree species, and for the end of leaf flush, a difference of 40.3 days. In the spring of 1998, the relative photosynthetic-photon-flux density under an intensively studiedCastanea crenata tree (late-flushing species) usually showed higher values than that under a similarly studiedAcer mono tree (early-flushing species). Analysis of the spatial-distribution pattern using Morisita’s1δ index revealed that the understory community had an aggregated distribution. In the overstory, the late- and the intermediate-flushing-species groups showed aggregated distributions, while the early-flushing-species group showed random distribution. Spatial correlation between the understory and the overstory was analyzed by using Morisita’sRδ index. The distribution of whole understory community spatially co-occurred with that of the late-flushing-species group of the overstory. In contrast, the understory community was less developed below the members of the early-flushing-species group of the overstory. We consider that the data presented here support our hypothesis, and we suggest that the growth and survival of understory individuals were promoted in the places receiving light for long periods in spring.     

Heat budget and statistical analysis of the relationship between stream temperature and riparian forest in the Toikanbetsu River basin, northern Japan

Riparian forests greatly influence aquatic ecosystems by providing shade cover, which controls water temperature and limits primary production. We examined the relationship between forest cover and summer stream temperature in northernmost Japan. Heat budget and statistical analyses were employed and the results were compared. Heat budget analysis revealed that the water temperature would decrease almost linearly from 29°C to 25°C with an increase in forested reaches along a 3.2 km stretch of the river. Multiple regression analysis by the stepwise method chose only open channel length as a variable to explain the variation in maximum stream temperature. A sharp increase in stream temperature was noted when riparian forest cover was removed in short lengths, of up to 1.0km; this increasing trend gradually flattened as the length of open stretch increased. Thus, even small openings in the riparian canopy resulted in drastic rises in summer stream temperature. The maximum summer temperatures estimated by the two methods were coincided, and can therefore be accurately estimated by regression analysis. Retrospective analysis based on the regression equation showed that the maximum summer temperature in 1947 was 6°C lower than at present, and that a sharp increase occurred from 1947 to 1960, a period of rapid expansion of agricultural land development in the watershed.     

Absolute configuration of arylglycerol-β-aryl ethers obtained by asymmetric reduction of the correspondingα-ketonic compound with intactFusarium solani cells

When (±)--oxo-guaiacylglycerol--(vanillic acid) ether (1) is degraded byFusarium solani M-13-1, the-ketone is initially reduced to giveerythro andthreo guaiacylglycerol--(vanillic acid) ethers (2), arylglycerol--aryl ethers, both of which are enantiomerically pure. The absolute configuration in each2 was determined by Mosher's method; the products were converted to,-di-(R)--methoxy--trifluoromethylphenylacetates (MTPA esters) (3) oferythro (-)- andthreo (+)-veratrylglycerol--(methyl vanillate) ethers (3), whose¹H nuclear magnetic resonance (NMR) spectra were examined and compared with those of four di-(R)-MTPA ester (3) diastereomers from chemically synthesizederythro (±)-3 andthreo (±)-3. To assign the- and-MTPA-OCH₃ peaks, the¹H NMR scans of several compounds that have substructures of 3 and their 3,4,5-trimethoxyphenyl analogues were examined. When a racemic alcohol reacts with (R)-MTPA to give a pair of (R)-MTPA ester diastereomers, the value was defined as the absolute value of the difference in the¹H chemical shifts of the peak between the diastereomers. It was found that the values of-MTPA-OCH₃ were larger than those of-MTPA-OCH₃ owing to a shielding effect of the veratryl ring located on the-MTPA-OCH₃, and that the-MTPA-OCH₃ peaks in the 3,4,5-trimethoxyphenyl compounds shifted downfield relative to those in the veratryl compounds. On the basis of the¹h NMR data of (R)-MTPA esters, the absolute configuration of the four chemically prepared diastereomers (3) were determined. The catabolicerythro 3 [fromerythro (-)-3] andthreo 3 [fromthreo (+)-3] were identical to (R, S, R)-erythro 3 and (R, S, S)- threo 3, respectively. An hydrogen species in the fungal reduction would attack the-ketone fromre-face of both (R)-1 and (S)-1, givingerythro (S, R)-2 andthreo (S, S)-2, respectively.Part of this paper was presented at the 33rd Lignin Symposium, Tsukuba, November 1988     

Effect of loading frequency on fatigue life and dissipated energy of structural plywood under panel shear load

Wood-based panels are subjected to cyclic panel shear load caused by wind and seismic forces in such an application as the sheathing of bearing walls. The fatigue behavior of structural plywood under panel shear load with two different loading frequencies was examined. Pulsating panel shear load with a triangular waveform and loading frequency of 0.5 or 5 Hz was applied to the plywood specimens. Stress−strain hysteresis loops were measured throughout the fatigue tests. Fatigue life was highly dependent on loading frequency at more than 0.5 stress level. The deterioration of mechanical property and damage accumulation in plywood specimen was observed to be slower at higher loading frequency at more than 0.5 stress level. Analyses based on energy loss suggest that panel shear load with higher loading frequency causes less damage to the plywood specimen during one loading cycle at higher stress level, and that the fatigue damage accumulation causing failure might be dependent on stress level although it seems to be unaffected by loading frequency. Based on these results, a new fatigue failure model for plywood specimen was qualitatively developed by combining Weibull’s weakest link model and Daniels’ fiber bundle model.     

Dielectric relaxation due to heterogeneous structure in moist wood

Dielectric properties in three main directions for hinoki wood (Chamaecyparis obtusa) specimens conditioned at various levels of relative humidity were measured in the frequency range from 20 Hz to 10 MHz over the temperature range from −150°C to 20°C. Three relaxations were observed in the specimens conditioned at high levels of relative humidity. The relaxation in the highest frequency range was ascribed to the motions of adsorbed water molecules. The relaxation in the middle frequency range remained unchanged by the ethanol–benzene extraction of specimens. The relaxation location was independent of measuring directions. The relaxation in the lowest frequency range was not detected in the specimens impregnated with methyl methacrylate (MMA). This result suggested that the relaxation was due to electrode polarization. The Cole-Cole circular arc law applied well to two relaxations recognized in the specimens impregnated with MMA. The relaxation magnitude in the middle frequency range was extremely large, and the distribution of relaxation times was very narrow. These characteristics suggested relaxation of the Maxwell-Wagner type resulting from the interfacial polarization in the heterogeneous structure, which included adsorbed water with large electrical conductivity within the insulating cell walls.     

Comparison of stand dynamics after dieback caused by pine wilt disease among pine forests with different management regimes in western Japan

In pine forests damaged by pine wilt disease, in western Japan, the effect of protection regimes of pine trees on the stand dynamics were examined in the following four stands: (1) lightly damaged stand (age 30–40 years) with no procedure in operation for protecting pine trees; (2) severely damaged stand (age 30–40 years) with no procedure in place for protecting pine trees; (3) severely damaged stand (age 50 years) with a selective cutting of infected trees; (4) severely damaged stand (age 30–40 years) with a selective cutting of infected trees. All the stands had been abandoned before the pine wilt disease damage. The understory structure of the severely damaged stand with no protection procedure was similar to that of the lightly damaged stand. Frequent invasion by tree species and acceleration in the growth of understory trees occurred after the dieback in the selective cutting stand. These results suggest that a deficiency in the canopy layer caused by the dieback resulted in low disturbance intensity in the early stages after the dieback, but the selective cutting increased the intensity by the reduction in the understory as well as the canopy layer. The intensity of the disturbance in the selective cutting stands was larger in the younger stand because it had a higher density of selectively cut pine trees. The different stand structure of pine forests occurred after the dieback because the intensity of the disturbance varied as a result of the selective cutting operation and the stand age.