Responses of leaf photosynthesis and plant growth to altered source–sink balance in a Japanese and a Dutch tomato cultivar

We investigated the effects of altered source/sink ratio by leaf or fruit pruning on leaf photosynthetic characteristics and whole-plant growth of ‘Momotaro York’, a Japanese cultivar, and ‘Dundee’, a Dutch cultivar and verified a hypothesis for sink-limitation of plant growth proposed by Tanaka and Fujita (1974). Plants were grown hydroponically with a high-wire system in a greenhouse for 11 weeks. Light-saturated photosynthesis of young, fully expanded leaves measured at atmospheric CO₂ partial pressure of 37 Pa and at an intercellular CO₂ partial pressure of 20 Pa was not influenced by alteration of source/sink ratio for either cultivar. Although soluble sugars were accumulated in leaves under high source/sink conditions, the amount of ribulose-1,5-bisphosphate carboxylase/oxygenase, a rate-limiting factor for CO₂-limited photosynthesis, was not affected by the altered source–sink balance. Net assimilation rate of a whole plant increased with decreasing source/sink ratio, but this can be accounted for by the changes in light interception per unit leaf area, without taking the source–sink relationship into consideration. It was concluded that the altered source/sink ratio did not change leaf photosynthetic capacity and the sink-limitation hypothesis cannot be applied to either cultivar under the conditions of the present study.     

Growth characteristic and sink strength of fruit at different CO2 concentrations in a Japanese and a Dutch tomato cultivar

The aim of the present study was to elucidate how fruit growth was limited by the source and sink capacities in a Japanese (‘Momotaro York’) and a Dutch (‘Dundee’) tomato cultivar. The two cultivars were grown hydroponically with a high-wire system in greenhouses for 25 weeks, and the growth characteristics and sink strength of fruit were determined. Fruits were pruned to four (4F) or one (1F) per truss. The latter were used to determine potential fruit growth, an indicator of fruit sink strength. Growth was also determined under normal (LC) and enriched (HC, 700 μmol mol⁻¹) CO₂ concentrations to examine the effect of source enhancement on fruit production. In both cultivars under normal CO₂, the growth rate of fruit pruned to 4F per truss was lower than that in 1F, indicating that maximum potential fruit growth was not achieved. Under HC conditions, fruit growth rate of ‘Dundee’ achieved in 4F trusses was lower than that in 1F. In ‘Momotaro York’ in HC, fruit growth in 4F trusses was close to potential. This implies that fruit growth was source-limited irrespective of CO₂ concentrations in ‘Dundee’ cultivar while fruit growth in ‘Momotaro York’ under normal and enriched CO₂ conditions was limited by source and sink strengths, respectively. Adjustments of cultural practices including increasing fruit number per truss and/or genetic approaches to enhancing fruit sink strength by breeding may improve fruit yields of Japanese cultivars under high source/sink conditions.     

Preparation and properties of oligoesterified wood blocks based on anhydride and epoxide

Summary Preparation and properties of oligoesterified woods in the form of block are reviewed. The oligoesterified wood blocks are prepared by stepwise addition reactions of dicarboxylic acid anhydride and epichlorohydrin (EpCl), or one-step chemical treatment with reactant solution of the anhydride and EpCl. Among the preparation methods investigated, the heating-suction method is industrially advantageous. In this method, wood blocks impregnated with the reactant solution are heated and then subjected to suction under reduced pressure and heating, to remove unreacted reactant solution. The oligoesterified wood blocks thus obtained contain oligoester chains formed by the alternate additions of the anhydride and EpCl to OH groups of wood. They also contain small amounts of free oligomers not linked with the wood matrix. Their dimensional stabilities against moisture and water become greater with increase in the apparent total weight increase due to the oligoester chains and the free oligomers. The oligoesterified wood blocks based on phthalic anhydride-EpCl are industrially promising, and exhibit higher compressive and flexural strenghts, greater chemical resistance, electric insulation, and much lower water absorption than untreated wood block. Furthermore, excellent resistances are observed against weathering and biodeterioration.     

Safety of the tram car for slopes examined by stress analysis of the ground structure

For monorail systems, it is very important to ensure the safety of the ground structure. We developed a tram car for slopes that utilizes the mechanism of the monorail and analyzed the stress of the ground structure that had double rails. First, we divided the ground structure into seven components, and formulated a procedure for calculating the stress of the ground structure. As a result, the stress that acts upon the main rail and the main rail connecting part was near the allowable stress, and each calculated value was within the allowable stress. We measured the stress by running the vehicle, and compared the measured values with the calculated values. As a result, some measured values were larger than the calculated values. However, the ratio of measured value to allowable stress was 90% or less. Finally, we calculated the static loading coefficient for each part, results of which were as follows: main and subrail: 1.1; rail connection part and prop foundation part: 1.0; rail installation part: 1.3. In the recalculations, it became clear that the recalculated values exceeded the allowable stresses. These results suggest that we need to review the ground structure materials.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Long-Term Observation of Fogwater Composition at two Mountainous Sites in Gunma Prefecture, Japan

We made serial observations on acid fog at Mt. Akagi and Mt. Haruna, Japan for 5 years. The altitudes of the sampling sites were 1500 m (Mt. Akagi) and 1200 m (Mt. Haruna) above sea level, and the sites were approximately 30 km apart. The average liquid water content (LWC) at Mt. Akagi and Mt. Haruna was 74 mg m^?3 and 63 mg m^?3, respectively. The pH of fogwater was 2.72–7.14 (mean 3.71) at Mt. Akagi and 2.94–6.58 (mean 3.73) at Mt. Haruna. Our long-term observations indicate that there was no significant difference in the chemical components in fogwater at both sites except for ammonium ion. However, there were some cases where the chemical components of fogwater at each site were differed remarkably even in the concurrent fog event. Nitrate and sulfate ions contributed to acidification of fogwater at Mts. Akagi and Haruna and 95% of sulfate ion in the fogwater originated from air pollution. Ammonia gas in the air was the main neutralizer of acidity in fogwater. When absorption of excessive nitric acid gas over ammonia gas in the air occurred, the pH of fogwater was lowered. Our back trajectory analysis indicated that the fogwater at Mt. Akagi was mainly affected by an air mass from the Kanto Plain, including Tokyo, while the fogwater at Mt. Haruna was influenced by an air mass from large, western cities, such as Nagoya and Osaka, as well as Tokyo.     

A Literature Review of Uncertainties in Studies of Critical Loads for Acidic Deposition

Uncertainties in the assessment of critical loads for acidic deposition are caused by the choice of biological indicators (BI), critical chemical values (CCV), the current methods used to determine critical loads for an ecosystem, and deficient field data. This paper focuses on the present steady-state mass balance (SSMB) approach, dynamic models and the importance of changes in atmospheric base-cation deposition (BCD), particularly in China. It is argued that 1) for the SSMB approach much uncertainty may come from the choice of BI and the related CCV, and long-term and large-scale monitoring data on weathering rates and growth uptake are urgently needed, especially in China, 2) significant uncertainty may be caused by changes in BCD during SO₂ emission controls, particularly in China, 3) constructing a mechanistic Al submodel may be a promising direction for dynamic models, and 4) the nutrient cycle in the vegetation through biogeochemical processes should be incorporated into dynamic models but the input requirements should be moderate for broad application considerations. Generally higher BCD, different soil components and characteristics and different vegetation types in China compared to Europe and North America suggest that more field investigations on BI and their corresponding CCV be carried out before application of current approaches to specific areas, particularly in China.     

Characterization of a new Maillard type reaction product generated by heating 1-deoxymaltulosyl-glycine in the presence of cysteine

The reaction between Amadori compounds and cysteine was investigated. When 1-deoxymaltulosyl-glycine (glycyl-fructosyl-glucose) was heated at 100 degrees C with cysteine in a neutral aqueous solution, a novel intermediate composed of 1-deoxyosone and cysteine was detected. NMR and mass spectrometry studies revealed the structure of the isolated intermediate to be 7,8a-dihydroxy-4a-methyl-8-(alpha-d-glucopyranosyloxy)hexahydro-5-oxa-4-thia-1-azanaphthalene-2-carboxylic acid. This intermediate easily generated isomaltol and acetylfuran as volatile compounds in 1 mol/L HCl at 100 degrees C.