Jack beans and vetiver grass growth on iron ore tailing sediments from the Doce River dam disaster in Brazil: plant growth regulator effects under different edaphic conditions

Journal of Soils and Sediments - After the greatest environmental disaster in the history of Brazil and the deposition of the iron ore tailings in alluvial regions, the process of revegetation for...     

Comparison between vegetation indices for detecting spatial and temporal variabilities in soybean crop using canopy sensors

Precision Agriculture - Crop monitoring through remote sensing techniques enable greater knowledge of average variability in crop growth. Canopy sensors help provide information on the variability...     

Assessment of induction and recovery times of anaesthesia in Astyanax bimaculatus using 2‐phenoxyethanol and the essential oils of Melaleuca alternifolia and Ocimum gratissimum

This study aimed to determine the lowest effective concentration (LEC) of 2‐phenoxyethanol (2‐Phe) and essential oils (EOs) of Melaleuca alternifolia and Ocimum gratissimum able to induce anaesthesia in Astyanax bimaculatus. LEC was assumed to be the required concentration to carry out anaesthesia in less than 3 min with recovery in <5 min and sufficient to carry out routine aquaculture procedures. The following concentrations were tested: 2‐Phe (100, 200, 300, 400, 500 and 600 µl/L); M. alternifolia (200, 300, 400, 500 and 600 µl/L); and O. gratissimum (10, 20, 30, 40, 50, 60, 70, 100, 150, 250 and 300 µl/L). Results show that all three agents evaluated have effective anaesthetic properties for use in Astyanax bimaculatus with LEC for 2‐Phe, M. alternifolia and O. gratissimum of 200, 300 and 60 µl/L respectively.     

How does water and salt stress affect the germination and initial growth of Brazilian soya bean cultivars?

The effects of water and salt stress on rate of germination and seedling growth were investigated under laboratory conditions in 46 soya bean genotypes from Central-West region of Brazil to verify how these stresses may limit crop establishment during the initial growth stage and also to identify the most tolerant genotypes to drought and salinity. Mild water and salt stresses were imposed by seed exposure to –0.20 MPa iso-osmotic solutions with polyethylene glycol—PEG 6000 (119.57 g/L) or NaCl (2.357 g/L) for 12 days at 25°C. The germination percentage, seedling length and seedling dry matter were measured, and then, salt or drought tolerance indexes were calculated. The “NS 5909 RG,” “NS 7000 IPRO,” “NS 7338IPRO,” “FPS Solimões RR,” “NS 5151 IPRO,” “SYN 13610 IPRO,” “LG 60177 IPRO,” “NS 6909 IPRO” and “BMX Desafio RR” were identified as the most drought-tolerant genotypes, whereas under salinity conditions, the genotypes “5D 615 RR,” “BMX Desafio RR,” “5D 6215 IPRO” and “BMX Ponta IPRO” were identified as tolerant. The “BMX Desafio RR” is the genotype most adapted to both stress conditions and, therefore, should be used under conditions of water shortage and excess salt in the soil at sowing time.     

Nutritional Contribution of Biofloc within the Diet of Growout and Broodstock of Litopenaeus vannamei,Determined by Stable Isotopes and Fatty Acids

The relative contributions of feed sources were determined through the isotopic signal (δ¹³C and δ¹⁵N) and fatty acid profile of feed items, shrimp muscle, and eggs of Litopenaeus vannamei reared in a biofloc system. In the growout phase, the isotope analysis showed the biofloc particle size class ≥250 μm contributed 55–100%; size ≥50 < 250 μm contributed 0–22%; and artificial feed contributed 0–45%. Principal component analysis applied to fatty acid profiles showed that biofloc ≥250 μm and artificial feed were the most important items in shrimp growout. For the egg production, isotope analysis suggested that the most important feed sources according to their relative contributions were polychaetes (0–100%), followed by artemia biomass (0–86%) and semi‐moist feed (0–66%), with lower contributions from squid, mussel, and the muscle of L. vannamei broodstock that had been cultured in biofloc. In terms of fatty acids, the most important items were artemia, polychaetes, and semi‐moist feeds. This work clarified the importance of feed sources for shrimp during culture in biofloc systems and during reproduction. Analysis of stable isotopes and fatty acids can be successfully used to trace the assimilation of nutrients during the nutrition of shrimp.     

Effects of biofloc technology on reproduction and ovarian recrudescence in Nile tilapia

The objectives of this study were to evaluate the reproductive cycle, morphological changes of ovary and mobilization of energy reserves in Nile tilapia reared with biofloc technology (BFT). In general, the growth and reproductive performance were highly similar between BFT and Control system (clear water). Difference between the systems was found in the hepatosomatic index (using mixed‐effects models), which suggested that BFT can alter the energy mobilization in the post‐spawning period. The absolute and relative fecundity, fertilization rate, number of larvae produced per female, gonadosomatic index, proportion of oogenesis cells, number of post‐ovulatory and atretic follicles were similar between the two systems. We also did not detect a reduction in the reproductive cycle length in Nile tilapia reared in BFT. Because there was no evidence of the negative effects of BFT on Nile tilapia reproduction, we concluded that BFT might be used for breeder stocking of this species.     

Rapid sequence modification in the highly polymorphic region (HPR) of the hemagglutinin gene of the infectious salmon anaemia virus (ISAV) suggests intra-segmental template switching recombination

The ISAV has a genome composed of eight segments of (–)ssRNA, segment 6 codes for the hemagglutinin–esterase protein, and has the most variable region of the genome, the highly polymorphic region (HPR), which is unique among orthomyxoviruses. The HPR has been associated with virulence, infectivity and pathogenicity. The full length of the HPR is called HPR0 and the strain with this HPR is avirulent, in contrast to strains with deleted HPR that are virulent to varying degrees. The molecular mechanism that gives rise to the different HPRs remains unclear. Here, we studied in vitro the evolution of reassortant recombinant ISAV (rISAV) in Atlantic salmon head kidney (ASK) cells. To this end, we rescued and cultivated a set of rISAV with different segment 6-HPR genotypes using a reverse genetics system and then sequencing HPR regions of the viruses. Our results show rapid multiple recombination events in ISAV, with sequence insertions and deletions in the HPR, indicating a dynamic process. Inserted sequences can be found in four segments of the ISAV genome (segments 1, 5, 6, and 8). The results suggest intra-segmental heterologous recombination, probably by class I and class II template switching, similar to the proposed segment 5 recombination mechanism.     

Productive performance of juvenile freshwater prawns Macrobrachium rosenbergii in biofloc system

The aim of this study was to compare two rearing systems for freshwater prawn Macrobrachium rosenbergii: one with use of a recirculating aquaculture system with biofilters (RAS) and another with use of microbial flocs (F). Thirty postlarvae of freshwater prawn with an initial average weight of 0.13 ± 0.05 g were randomly stocked in six experimental units with 0.20 m² and volume of 50 L. The experiment lasted thirty days. Dissolved oxygen, temperature and pH were monitored daily; ammonia concentration was determined three times per week; nitrite concentration, alkalinity and hardness were measured weekly. For the formation of microbial floc, molasses was used to keep the ammonia concentrations within safe levels for prawn farming. The variables of water quality remained within the suitable range for the production of the species, except for ammonia concentrations at the F treatment, which exceeded the safe levels. At the end of the experiment, the following parameters were evaluated: survival, specific growth rate, weight gain and feed conversion rate. Differences were found only in feed conversion rate with better values on RAS treatment. The microorganisms present in the RAS and F treatment were also evaluated. The densities of rotifers, amoebas and total bacteria were higher at the F treatment although the same organisms were found at the RAS treatment. The results of this study showed the possibility of rearing M. rosenbergii in biofloc system technology.     

Target and non-target site mechanisms of fungicide resistance and their implications for the management of crop pathogens

Fungicides are indispensable for high-quality crops, but the rapid emergence and evolution of fungicide resistance have become the most important issues in modern agriculture. Hence, the sustainability and profitability of agricultural production have been challenged due to the limited number of fungicide chemical classes. Resistance to site-specific fungicides has principally been linked to target and non-target site mechanisms. These mechanisms change the structure or expression level, affecting fungicide efficacy and resulting in different and varying resistance levels. This review provides background information about fungicide resistance mechanisms and their implications for developing anti-resistance strategies in plant pathogens. Here, our purpose was to review changes at the target and non-target sites of quinone outside inhibitor (QoI) fungicides, methyl-benzimidazole carbamate (MBC) fungicides, demethylation inhibitor (DMI) fungicides, and succinate dehydrogenase inhibitor (SDHI) fungicides and to evaluate if they may also be associated with a fitness cost on crop pathogen populations. The current knowledge suggests that understanding fungicide resistance mechanisms can facilitate resistance monitoring and assist in developing anti-resistance strategies and new fungicide molecules to help solve this issue. © 2023 Society of Chemical Industry.     

EFFECTS OF FLUID AND COMPUTED TOMOGRAPHIC TECHNICAL FACTORS ON CONSPICUITY OF CANINE AND FELINE NASAL TURBINATES

Turbinate destruction is an important diagnostic criterion in canine and feline nasal computed tomography (CT). However decreased turbinate visibility may also be caused by technical CT settings and nasal fluid. The purpose of this experimental, crossover study was to determine whether fluid reduces conspicuity of canine and feline nasal turbinates in CT and if so, whether CT settings can maximize conspicuity. Three canine and three feline cadaver heads were used. Nasal slabs were CT‐scanned before and after submerging them in a water bath; using sequential, helical, and ultrahigh resolution modes; with images in low, medium, and high frequency image reconstruction kernels; and with application of additional posterior fossa optimization and high contrast enhancing filters. Visible turbinate length was measured by a single observer using manual tracing. Nasal density heterogeneity was measured using the standard deviation (SD) of mean nasal density from a region of interest in each nasal cavity. Linear mixed‐effect models using the R package ‘nlme’, multivariable models and standard post hoc Tukey pair‐wise comparisons were performed to investigate the effect of several variables (nasal content, scanning mode, image reconstruction kernel, application of post reconstruction filters) on measured visible total turbinate length and SD of mean nasal density. All canine and feline water‐filled nasal slabs showed significantly decreased visibility of nasal turbinates (P < 0.001). High frequency kernels provided the best turbinate visibility and highest SD of aerated nasal slabs, whereas medium frequency kernels were optimal for water‐filled nasal slabs. Scanning mode and filter application had no effect on turbinate visibility.