A survey on the use of rugs in Australian horses

The practice of horse rugging has important implications for horse welfare and performance, but in Australia, rugging practices have not been properly documented. The objective of this study was to obtain an understanding of Australian horse rugging practices. An online survey reviewed the management of 2659 Australian horses over 12 months. Of the reported horses a total of 84.8% were rugged, although most owners (69.5%) indicated that they were unsure whether horses needed to be rugged at all. Rugging was felt by 59.8% of owners to be a requirement for horses in competition. Riding and competition were significantly associated with the use of rugs. Nearly all respondents (89.0%) felt that ‘over-rugging’ was a concern. However, 4.8% of owners would use up to 4 rugs at any one time on their horse and 21.4% of horses were still rugged in temperatures above 20°C in Australia. Many Australian horse owners (42.8%) also believe that horses feel cold if they are not rugged. Anthropomorphism when it comes to rugging horses cannot be justified as the horse has a much wider thermoneutral zone (TNZ) than humans. Australian climate, owner opinions, equestrian discipline and whether a horse is used for riding influence Australian horse rugging practices. However, current practices are based on limited available research and are not necessarily to the benefit of the horse. The major limitation was that the survey likely attracted respondents who are interested in the topic creating a self-selection bias.     

Comparison of <Emphasis Type="Italic">Pinus taeda</Emphasis> L. whole-tree wood property calibrations using diffuse reflectance near infrared spectra obtained using a variety of sampling options

A necessary objective for tree-breeding programs, with a focus on wood quality, is the measurement of wood properties on a whole-tree basis, however, the time and cost involved limits the numbers of trees sampled. Near infrared (NIR) spectroscopy provides an alternative and recently, it has been demonstrated that calibrations based on milled increment cores and whole-tree data can provide good estimates of whole-tree properties. Several options exist for sampling standing trees and the aim of this study was to compare wood property calibrations based on NIR spectra collected from samples obtained using different sampling methods. Calibrations for whole-tree lignin and basic specific gravity based on NIR spectra from whole-tree chips (milled or intact) had the strongest statistics, calibrations based on NIR spectra from milled increment cores were similar. Other options for sampling the tree (drill shavings, etc.) gave errors that were too large for practical applications. If an increment core is going to be used to estimate whole-tree properties, it is recommended that it be dried and milled prior to analysis.     

Root exposure effects on water relations of Eucalyptus nitens nursery stock

Bare-root seedlings of Eucalyptus nitens frequently exhibit water stress after planting resulting in leaf lamina damage and reduced leaf area. Two trials examined effects of root exposure and desiccation between lifting and transplanting on post-planting water relations, leaf retention and root growth. Plants with roots exposed on a glasshouse bench initially lost water rapidly. In one trial ₁ declined to around –2.0 MPa within 2.5 h, after which there was no further change with exposure up to 7.5 h. In the second trial, the initial decline in ₁ was more rapid, reaching below –2.0 MPa in the first hour, before remaining stable with continuing exposure up to 4.5 h. A further decline then continued to –4.0 MPa after 7.5 h.Two days after transplanting into potting mix, day – time leaf water potentials in all desiccation treatments had declined to near –2.0 MPa. Hydraulic resistivity, measured as leaf specific resistivity two days after transplanting, increased following exposure for greater than 2.5 h, but there was no further increase between 4.5 and 7.5 h. The increase in resistivity corresponded with leaf water potential declining below –2.0 MPa during exposure.In the second trial, increasing root exposure time resulted in decreased leaf area due to lamina necrosis. Root growth, measured three weeks after planting, was also reduced. and there was also a positive curvilinear relationship between leaf area remaining at three weeks and new root growth. The results are discussed in terms of hardiness and the management of E. nitens seedlings from nursery to plantation.     

Implications of piscine predator control on the federally listed fountain darter

One strategy for protecting the federally listed fountain darter, Etheostoma fonticola (Jordan & Gilbert), during low flow conditions is the removal of piscine carnivores [in this case, largemouth bass, Micropterus salmoides (Lacepède)]. However, headwater spring communities of the Comal and San Marcos rivers include another potential predator [red swamp crayfish, Procambarus clarkii (Girard)]. Removal of piscine carnivores could produce cascading effects by increasing crayfish consumption of benthic fish. The purpose of this study was to evaluate if piscine carnivore removal will lessen predatory pressure or induce a trophic cascade with crayfish increasing and causing declines in fountain darter. The numbers of fountain darter consumed were quantified among three predator treatments (red swamp crayfish only, largemouth bass only and red swamp crayfish and largemouth bass combined) and vegetation treatments (vegetated and non‐vegetated) at three temperature regimes (18, 22, 27°C). Vegetation had no effect on fountain darter predation. Among temperature trials, largemouth bass only and red swamp crayfish and largemouth bass combined consumed similar numbers of fountain darter, and red swamp crayfish only consumed the least numbers of fountain darter, except at 22°C. Largemouth bass did not consume more red swamp crayfish than fountain darter. Therefore, largemouth bass removal appears to be a viable option for reducing fountain darter predation during periods of low flow.     

Management strategies for forage rape (Brassica napus L. cv Goliath): Impact on dry-matter yield,plant reserves,morphology and nutritive value

Limited information is available on the grazing management principles of forage rape (Brassica napus L.), particularly in relation to grazing height and intensity and the impact of these on dry-matter (DM) yield and nutritive value. A glasshouse study was undertaken to investigate the effect of three defoliation heights (plant height at harvest; DH: 40, 70 and 90 cm; L, M and H DH respectively) and three defoliation intensities (height at which plants were cut; DI: 5, 20 and 35 cm of residual height; H, M and L DI respectively) on forage rape (cv Goliath) yield and nutritive value at two harvests (harvest 1, H1 and harvest 2, H2), and the impact of nitrogen (N) and water soluble carbohydrate (WSC) reserves on regrowth. Increasing DH from L to H increased estimated total DM yield (H1 plus H2) from 0.5 to 4.6 t DM/ha but DI did not affect yield. Dry-matter yield was optimized at 90 cm DH, but greater nutritive value was achieved by harvesting at lower levels of DH. Despite high in vitro DM digestibility (IVDMD; 852–889 g/kg), harvesting at 90 cm DH could not meet the protein requirement of lactating dairy cows and harvesting at lower levels risks nitrate poisoning. Our results indicate the optimum DH may be between 70 and 90 cm DH, and 20 and 35 cm DI, which requires further studies.     

Field Evaluation of Cocksfoot,Tall Fescue and Phalaris for Dry Marginal Environments of South‐Eastern Australia. 1. Establishment and Herbage Production

Newly developed candidate cultivars of cocksfoot (Dactylis glomerata L.), phalaris (Phalaris aquatica L.) and tall fescue (Festuca arundinacea Schreb. = syn. L. arundinaceum (Schreb) Darbysh.) were evaluated over four years for persistence and productivity against current commercial cultivars in small plots at five locations selected for lower and less reliable rainfall and difficult soils (low pH and high Al) in south‐eastern Australia known to be marginally too dry for these grass species. The five locations were ‐ representing summer dominant rainfall, Inverell, in northern New South Wales (NSW); ‐ representing uniform rainfall; Trungley Hall, (medium rainfall), and Beckom (lower rainfall) both in southern NSW; and; representing a winter dominant pattern ‐ Eversley, (higher rainfall), and Bealiba, (lower rainfall), in central Victoria. The objective was to determine if the new candidate cultivars were more likely to persist and to be productive than current commercial cultivars. The study showed that most phalaris and cocksfoot treatments were highly productive in high rainfall years at one or both sites in southern NSW. However, all treatments had become much less productive by the end of the experimental period due to plant loss under hot, dry conditions in the final summer. At Bealiba in central Victoria, cocksfoot was the most productive species with several cocksfoot treatments of both subsp. hispanica and subsp. glomerata still present at the final harvest despite a hot and dry final summer‐autumn. Tall fescue was the most productive species in the two higher rainfall environments (Inverell, Eversley) although most treatments of all species performed well at those sites. Continental tall fescues were more productive on average than Mediterranean tall fescues at the strongly acidic Eversley site. As a result of this work, two of the new cocksfoot candidates (Moroccan Fine and AVH48 Selection) and one of the tall fescue candidates (Summer Active 1) have been licensed for commercial development and release.     

Adverse effects of simulated harvesting of short-rotation willow and poplar coppice on vertical pressures and rut depths

Little is known of the effects of mechanized harvesting on ground conditions during the harvesting of short-rotation coppice. An investigation was therefore carried out in which different vehicles were used to simulate the effects of wheeling from heavy and light harvesters and crop removal equipment. The experiments were carried out on sites containing Bowles hybrid willow (Salix viminalis) and poplars (Populas rap) and on clay and sandy loam soils. The effect of different vehicles was assessed in terms of rut damage and direct measurements of soil stress using buried sensors. Maximum stresses measured 0.3 m below tractor wheels ranged from 50 to 200 kPa, but the greatest stresses, 350 kPa, were recorded under laden trailer wheels. Maximum stresses measured beneath crawler tracks were only 25 kPa. Similarly, substantial ruts were caused by vehicles simulating wheeled harvesters, the deepest ruts were caused by laden trailers but crawler tracks created least disturbance. Wheeling was carried out at soil water contents above the plastic limit and the deepest ruts were created on clay rather than sandy loam soil. The effects of the stresses generated in the soil could impede future root growth, and the deeper ruts formed could damage existing root systems of coppice.