Water content measurement in black spruce and aspen sapwood with benchtop and portable magnetic resonance devices

Abstract

In this study, water content in black spruce (Picea mariana Mill.) and aspen (Populus tremuloides Michx.) sapwood samples was investigated with time-domain magnetic resonance (MR). Time-domain MR measurements easily distinguish water in different environments in wood according to the spin-spin relaxation time and provide quantitative information on water content. The MR techniques employed can distinguish and quantify the individual signal components. Both black spruce and aspen have two signal components at moisture contents above the fiber saturation point. These two signal components correspond to motionally restricted water, often referred to as bound water, and unrestricted, or free water. Bound water content is constant above 40% moisture content. No signal from free water was detected at or below 20% moisture content in either species. We also demonstrate the use of a recently developed portable unilateral magnet that can be employed as a powerful tool in the study and measurement of water content in wood.     

Diversity of the calabash tree (<Emphasis Type="Italic">Crescentia cujete</Emphasis> L.) in Colombia

Germplasm of the calabash tree (Crescentia cujete L.) was collected in five major regions of Colombia, i.e. the Andes, Caribbean, Amazon, Orinoco, and Pacific regions. Collecting this multipurpose tree was guided by the indigenous knowledge of farmers and artisans in each region. Large variation in fruit shapes and sizes was found, of which some forms were typical for certain regions. Overall 56 accessions were collected and roughly classified into 22 types by eight fruit shapes and eight sizes. Molecular markers (Amplified fragment length polymorphisms) were applied to leaf tip tissue originating from vegetatively propagated plants in order to assess the diversity available in the germplasm collected as well as to detect patterns of geographical or morphological similarity. One accession each of C. alata H.B.&K. and C. amazonica Ducke were used as outgroups. Overall, genetic diversity was high (mean Nei and Li’s coefficient of 0.43). No relations could be established between either geographical provenance or fruit morphology and patterns of genetic diversity. Concerning the outgroups, the C. amazonica accession appeared to be a distinct species. The C. alata accession, however, did not seem to be sufficiently distinct from C. cujete to merit species status. The latter material may in fact be a hybrid or serve to challenge the validity of interspecific organization of the genus Crescentia.

Impact of fertilization on tree-ring delta15N and delta13C in beech stands: a retrospective analysis

We studied the effects of two fertilization treatments (N and NPKCa) on wood nitrogen (N) isotope composition (delta(15)N), water-use efficiency (WUE) estimated by carbon isotope composition (delta(13)C) analyses, and ring width of trees in 80-year-old beech (Fagus sylvatica L.) stands in the forest of Fougères, western France. Four replicates were fertilized in two successive years (1973 and 1974), 20 years before core sampling. Unfertilized control trees displayed a decreasing delta(15)N trend with time. The N and NPKCa treatments both increased delta(15)N compared with the control treatment. Wood extraction by organic solvents enhanced the delta(15)N signal. Thus, N addition to the beech ecosystem, even in moderate amounts, could be traced back in tree-ring delta(15)N, suggesting that wood N isotope analysis is a promising tool for studying the long-term effects of N deposition on forests. Although WUE decreased for about 6 years after N fertilization, WUE in NPKCa-treated trees did not differ significantly from that in control trees. Results were similar whether based on cellulose or total wood delta(13)C analysis, suggesting that extraction of cellulose is not necessary when studying fertilization impacts on WUE. The NPKCa treatment had a large impact on radial growth, causing a significant long-lasting increase of 29% compared with the control treatment. Nitrogen alone did not change radial growth significantly.     

Wirksamkeit des Kieselgurpräparates Dryacide® gegen vorratsschädliche Insekten

The diatomaceous earth (DE) Dryacide^® was tested under laboratory conditions on surfaces (2 g DE/m²) and in wheat grain (3 kg DE/t wheat) at a relative humidity of 70±5% and a temperature of 22±1°C. The wheat had a moisture content of 14.5%. The effect of surface treatments was tested onEphestia kuehniella, Oryzaephilus surinamensis, Tenebrio molitor andTribolium castaneum. The efficacy of grain treatments was determined usingEphestia elutella, O. surinamensis, Sitophilus granarius andTribolium confusum. In both treatments adult and larval stages were included.100% mortality were reached with the surface treatments in adults and larvae ofO. surinamensis and the adults ofT. molitor andE. kuehniella after an exposition time of 3–9 days. AgainstT. castaneum and the larvae ofT. molitor andE. kuehniella no complete control could be achieved.In the grain treatments the dosage of 3 kg DE/t wheat reached 100% mortality in all tested pests exceptS. granarius. Most sensitive wereO. surinamensis andE. elutella. InT. confusum the adults died within 13 days of treatment, but for complete control of the larvae 13 weeks were necessary. AgainstS. granarius the silica dust showed no satisfactory efficacy, because 49 days after beginning of the examinations beetles of the progeny hatched. Dryacide^® could not prevent the reproduction of the granary weevil, but there was a lower number of progeny compared to the untreated control.     

Effects of Monoglycerides of Varying Fatty Acid Chain Length and Mixtures Thereof on Sponge‐and‐Dough Breadmaking Quality

Monoglycerides are widely used in the baking industry because of their antistaling effects, mainly suppressing crumb firming. Commercial monoglycerides are normally prepared from hydrogenated fats, with stearate being the most common fatty acid. In a previous study, monoglycerides such as monopalmitate (C16) and monostearate (C18) had positive effects on Canadian short process bread but no improvements on sponge‐and‐dough process (SDP) bread. The objective of this study was to investigate the effects of saturated monoglycerides of varying fatty acid chain length (C14–C22) on SDP breadmaking quality by using volume judgment, crumb image analysis, and texture measurements. Higher levels (1.00–1.50%) of all monoglycerides (C14, C16, and C18) significantly (P < 0.05) increased loaf volume and cell diameter. The larger cell diameter with increasing levels of these monoglycerides may have resulted from softer, more extensible dough handling properties and greater gas cell stability during baking. Addition of C16 and C18 caused the largest increase in crumb softness with increasing monoglyceride levels but showed relatively low resilience, which might be related to larger loaf volume (i.e., lower density of bread). However, addition of blended monoglycerides C14+C16 increased crumb softness and loaf volume while partially retaining resilience. Each monoglyceride had a different function in breadmaking quality and somewhat positive effects on SDP.     

Comparison of Computed Tomographic and Radiographic Popliteal Lymphangiography in Normal Dogs

Objective: To (1) describe computed tomographic (CT) popliteal lymphangiography; (2) compare the number of thoracic duct (TD) branches detected by CT and by radiography after popliteal lymphangiography; and (3) to compare the number of branches detected after left and right popliteal lymphangiography. Study Design: Experimental study. Animals: Adult dogs (n=6). Methods: A randomly selected popliteal lymph node was percutaneously injected with 12 mL iodinated contrast medium through a 25‐g butterfly catheter over 4–5 minutes. Lateral and ventrodorsal (VD) thoracic radiograph projections and thoracic CT were performed. The procedure was repeated using the contralateral lymph node after a 48–72 hours washout period. Results: One dog had TD branches visible on CT but not on radiographs. A significantly greater number of TD branches were observed with CT popliteal lymphangiography compared with lateral and VD radiographic popliteal lymphangiography (P=.003 and P<.001, respectively). The number of visible TD branches observed between the 6th thoracic and 1st lumbar vertebrae were not significantly different in these dogs (P=.146). A significant difference in number of TD branches observed was not found after left or right popliteal lymph node injection (P=.097). Conclusions: CT popliteal lymphangiography consistently identified a greater number of TD branches when compared with radiographic popliteal lymphangiography. Injection of either popliteal lymph node resulted in the same number of TD branches being observed.     

Molecular Monitoring of SRB Community Structure and Dynamics in Batch Experiments to Examine the Applicability of in situ Precipitation of Heavy Metals for Groundwater Remediation (15 pp)

Background, Aims and Scope   Sulfate-reducing bacteria (SRB) are known for their capacity to reduce and precipitate heavy metals (HM) as metal sulfides, offering the opportunity to create an in situ reactive zone for the treatment of heavy metal-contaminated groundwater, a process called in situ metal precipitation (ISMP). The applicability of the ISMP technology first has to be investigated at a laboratory scale before going into an on site application. The evaluation and optimization of the ISMP process is facilitated when physical/chemical analysis techniques are combined with molecular tools that specifically monitor the abundance, diversity and dynamics of the indigenous sulfate reducing microbial community. In this study, batch experiments were conducted in order to investigate the feasibility of ISMP as a groundwater remediation strategy for an industrial site contaminated with elevated levels of Zn, Cd, Co and Ni. Methods   The potential of different types of carbon source/ electron donor (lactate, acetate, methanol, ethanol, Hydrogen Release Compound?, molasses) to stimulate the sulfate reduction and metal precipitation activity of the naturally present (or indigenous) SRB community was explored. In addition, the effect of amending vitamin B12 and yeast extract was evaluated. The ISMP process was monitored by combining analytical analyzes of process parameters (SO42&#61485;-concentration, heavy metal concentrations, pH, Eh) with molecular tools such as SRB subgroup and genus specific PCR, denaturing gradient gel electrophoresis (DGGE), and phylogenetic analysis of clone sequences, based on either the 16S rRNA or the dsr (dissimilatory sulfite reductase) gene. Results and Discussion   The efficiency of different carbon-sources to stimulate the ISMP process followed the order HRC&#61650; 〉 molasses 〉 methanol 〉 lactate 〉 ethanol 〉 acetate. Within 10 weeks, the highest sulfate and metal removal efficiencies ranged from 85% to 99%. Addition of yeast extract boosted the ISMP process, whereas vitamin B12 negligibly affected SRB activity. Analysis of the sulfate reducing population by SRB subgroup and genus specific PCR demonstrated that members of the genus Desulfosporosinus dominated in all batch tests, while 16S rDNA DGGE profiles additionally revealed the presence in the microbial communities of non-sulfate reducing bacteria within the family Clostridium and the &#61541;-proteobacteria. The dsrB-based DGGE profiles allowed us to assess the diversity and dynamics of the sulfate reducing community and added to a better understanding of the effects of different batch conditions on the ISMP process. Remarkably, all dsrB sequences affiliated with the dsrB gene sequence cluster found in Desulfotomaculum, which received their xenologous dsrB gene from the &#61540;-proteobacteria. Conclusions   The batch experiments, which aimed at stimulating the activities of the indigenous SRB communities, demonstrated that these communities were present and that their activities could be used to obtain efficient in situ precipitation of the contaminating heavy metals. This opens the possibility to test this concept in the future as an on site demonstration as part of the groundwater strategy for the heavy metal contaminated site. Although batch setups are suitable for preliminary feasibility studies for ISMP, they do not reflect the in situ situation where sulfate and heavy metal and metalloid polluted groundwater are supplied continuously. A sulfate reducing strain JG32A was isolated from whose 16S rRNA gene affiliated with the genus Desulfosporosinus, while its dsrB gene sequence clustered with Desulfotomaculum dsrB gene sequences, which received their xenologous dsr genes from &#61540;-proteobacteria. Therefore we hypothesize that the batch experiments enrich members of the Desulfosporosinus genus that possess a non-orthologous dsrB gene. Recommendation and Perspective   The next step towards an on site pilot test for ISMP will be the setup of a series of column experiments, with process conditions that are selected based on the above mentioned results. This will allow to define optimal ISMP process conditions and to test its long-term efficacy and sustainability before going into an on site bioremediation application. By applying the described molecular tools together with physical-chemical analyzes, it can be investigated whether the same SRB community is enriched and which type of C-source is most effective in promoting and sustaining its growth and sulfate-reduction activity.