Organogenic responses of Pinus pinea cotyledons to hormonal treatments: BA metabolism and cytokinin content

Isolated cotyledons from mature Pinus pinea L. embryos were cultured in vitro in a factorial combination of 4.4, 10 and 44.4 microM N6-benzyladenine (BA) for 2, 4, 8, 16 and 35 days to optimize shoot regeneration. Incubation of explants in 44.4 microM BA for 4 days, in place of the standard incubation in 4.4 microM BA for 35 days, reduced the entire culture period to 4 weeks. Shortening the culture period had no significant effect on the caulogenic response or the number of buds formed per cotyledon. To establish the relationship between key moments in the caulogenic process induced by 4.4 microM BA and the endogenous concentrations of the active forms of BA and other isoprenoid-type cytokinins (CKs), we examined uptake, metabolism and amount of BA, as well as the amounts of zeatin, dihydrozeatin and their ribosides in P. pinea cotyledons after 1, 2, 6, 12 and 24 h, and 2, 4, 8, 16 and 35 days of exposure to 8-[14C]BA. Uptake and release of BA were associated with water movement between explants and the medium during the first 8 days of culture. The interconvertible forms of BA were the main metabolites formed in the tissues. Inactivation of BA as a result of conjugation or oxidation was insignificant. The endogenous concentration of BA + N6-benzyladenosine was 20-fold higher than the exogenously applied BA during the competence acquisition phase (Days 0-3). The concentration of isoprenoid-type CKs also increased 16-fold and then decreased during this time. Induction of shoot buds (Days 4-8) was characterized by a second peak of BA uptake by explants that triggered the synthesis of N6-benzyladenosine-5 -monophosphate and by the maintenance of isoprenoid-type CKs. Reestablishment of CK homeostasis marked the shift from the induction phase to the shoot development phase in this organogenic process (Days 8-12).     

Characterization of cider apples on the basis of their fatty acid profiles

In the current study, the fatty acids composition of 30 monovarietal apple juices from six cider apple varieties belonging to two categories was analyzed. The different apple juices were obtained from three consecutive harvests (1997, 1998, and 1999). The fatty acids concentration in apple juice together with chemometric techniques such as principal components analysis (PCA), soft independent modeling of class analogy (SIMCA), and linear discriminant analysis (LDA), allowed us to differentiate apple juices on the basis of the sweet or sharp category to which the cider apple variety belongs. Fatty acids such as the unsaturated oleic and linoleic acids, and saturated caprylic, capric, stearic, and palmitic acids were related to the sweet cider apple category, while pentadecanoic acid is related to the sharp class.     

Application of isotope dilution analysis for the evaluation of extraction conditions in the determination of total selenium and selenomethionine in yeast-based nutritional supplements

Isotope dilution analysis (IDA) has been used to quantify total selenium, total solubilized selenium, and the selenomethionine (SeMet) amount in yeast and yeast-based nutritional supplements after acid microwave digestion and different enzymatic extraction procedures. For this purpose, both a (77)Se-enriched SeMet spike, previously synthesized and characterized in our laboratory, and a (77)Se(VI) spike were used. In the analysis of the nutritional supplements, the SeMet spike was added to the sample and extracted under different conditions, and the (78)Se/(77)Se and (80)Se/(77)Se isotope ratios were measured as peak area ratios after high-performance liquid chromatography (HPLC) separation and inductively coupled plasma mass spectrometry (ICP-MS) detection. The formation of SeH(+) and mass discrimination were corrected using a natural SeMet standard injected every three samples. Similarly, total solubilized selenium was measured in the extracts after enzymatic hydrolysis using the (77)Se-enriched SeMet as a spike by direct nebulization without a chromatographic separation. To establish a mass balance, total selenium was also determined by IDA-ICP-MS on the yeast tablets after microwave digestion using (77)Se(VI) as a spike. Results showed that all enzymatic procedures tested were able to solubilize total selenium quantitatively from the solid. However, the recovery for the species SeMet, the major selenium compound detected, was seriously affected by the enzymatic procedure employed and also by the matrix composition of the supplement evaluated. For the yeast sample, SeMet recovery increased from 68 to 76% by the combined use of driselase and protease. For the nutritional supplements, the two most effective procedures appeared to be protease and driselase/protease, with a SeMet recovery ranging from 49 to 63%, depending upon the supplement evaluated. In the case of in vitro gastrointestinal enzymolysis, the results obtained showed 26-37% SeMet recovery, while the rest of selenium was solubilized as other unknown compounds (probably Se-containing peptides).     

Gas chromatographic analysis of total fatty acids in cider

This paper reports the composition of total fatty acids in an apple beverage, cider. Fatty acids are present in the free or esterified form and contribute to both the flavor and foam properties of cider. Fatty acids were separated and identified as methyl esters by GC-MS, and 12 of these were subsequently determined by GC-FID. The major fatty acids found in cider were caproic, caprylic, capric, and palmitic acid, the saturated acids predominating over the unsaturated ones. The proposed method was applied to 59 ciders from three consecutive harvests (1996, 1997, and 1998), which were made by 19 cider-makers from the region of Asturias (Spain). Linear discriminant analysis of fatty acids in these samples allowed selection of palmitoleic, pentadecanoic, linoleic, myristic, and linolenic acid as the most predictive variables to differentiate ciders made from apples grown in the Asturias region (1997 harvest) and ciders made from apples grown outside this region (1996 and 1998 harvests).     

Production and composition of cider spirits distilled in "alquitara"

The capacity of alquitara (a traditional distillation system) to produce cider brandies is evaluated. To do so, the chemical composition of 12 fractions obtained during the distillation process and the cider brandies obtained from five ciders were analyzed (alcohol strength, methanol, volatile substances, furfural, and metals), taking into account European and Spanish legislation. During the course of distillation, an important increase in methanol, furfural, 2-phenylethanol, and metals in the last fractions was observed, while fusel oils were more abundant in the first fractions collected. Only acetaldehyde behaved differently, showing a minimum concentration in the middle fractions that might be explained by its formation on the surface of alquitara. On the other hand, the final distillates obtained by means of this method complied with the considered regulations. Worth highlighting in this regard are the low levels of a potential toxin such as methanol, as well as the detection of a constant ratio for methanol, ethanol, and fusel oil for the pairs of cider/spirits analyzed, which could be interpreted as an indication of good uniformity in the distillation system and method, thus guaranteeing product quality.     

Determination of tetracycline antibiotic residues in edible swine tissues by liquid chromatography with spectrofluorometric detection and confirmation by mass spectrometry

A sensitive and specific method is described for the simultaneous determination of oxytetracycline, tetracycline (TC), and chlortetracycline residues in edible swine tissues, by combining liquid chromatography with spectrofluorometric and mass spectrometry detection. The procedure involved a preliminary extraction with EDTA-McIlvaine buffer acidified at pH 4.0, followed by solid-phase extraction cleanup using a polymeric sorbent. The liquid chromatography analysis was performed with spectrofluorometric detection after postcolumn derivatization with magnesium ions. The limits of quantification were 50 microg/kg for muscle and 100 microg/kg for kidney tissues. The recovery values were greater than 77.8% for muscle and 65.1% for kidney. The method has been successfully used for the quantification of tetracyclines in swine tissues samples. The selective liquid chromatography mass spectrometric analysis for confirmation of oxytetracycline in one positive swine muscle sample was made by atmospheric pressure chemical ionization (APCI). The APCI mass spectra of the TCs gave the protonated molecular ion and two typical fragment ions, required for their confirmation in single ion monitoring scan mode in animal tissues.     

Acrylamide formation from asparagine under low moisture Maillard reaction conditions. 2. Crystalline vs amorphous model systems

The formation of acrylamide was investigated in model systems based on asparagine and glucose under low moisture Maillard reaction conditions as a function of reaction temperature, time, physical state, water activity, and glass transition temperature. Equimolar amorphous glucose/asparagine systems with different water activities were prepared by freeze drying and were shown to quickly move to the rubbery state already at room temperature and a water activity of above 0.15. The acrylamide amounts were correlated with physical changes occurring during the reaction. Pyrolysis and kinetics of acrylamide release in amorphous and crystalline glucose/asparagine models indicated the importance of the physical state in acrylamide formation. In amorphous systems, acrylamide was generated in higher concentrations and at lower temperatures as compared to the crystalline samples. Time and temperature are covariant parameters in both systems affecting the acrylamide formation by thermal processes. On the other side, the water activity and glass transition temperature do not seem to be critical parameters for acrylamide formation in the systems studied.     

Effect of red grapes co-winemaking in polyphenols and color of wines

The red grapes co-winemaking effect on phenolic fraction and wine color has been studied for the first time, where Monastrell was comacerated and cofermentated with Cabernet Sauvignon and Merlot. Changes in the relative abundance of anthocyanins were observed as well as hyperchromic shifts at 530 and 620 nm; these effects remain constant after aging. Co-winemaking also favored copigmentation, giving way to more stable anthocyanins and facilitating their polymerization. With regard to color evolution, the mixture of Monastrell with Merlot grapes was more appropriate than with Cabernet Sauvignon for aging wines in oak barrels. The extent of copigmentation was more important in young wines than in aged wines. This is mainly due to the self-anthocyanin monomer reactions in the case of young wines, whereas in aged wines copigmentation is mainly due to the reaction between the anthocyanins and other polyphenolic cofactors. Discriminant analysis showed the possibility of differentiating wines according to the aging time and the type of wine, with color parameters (color intensity, OD 620 nm, and OD 520 nm) being the most important discrimination variables in the first case and petunidin-3-glucoside and peonidin-3-glucoside contents in the second case.     

Distribution of Metal Extractable Fractions during Anaerobic Sludge Treatment in Southern Spain WWTPs

A new European Union legislation on sludge treatment isbeing introduced that will replace the one currently in force.The control of heavy metals is an important aspect of this newlegislation. The most common methodology to examine the metalcontent of sludges is determination of total metal contentafter total or pseudo total digestion of the sludge samples.Nevertheless, this kind of analysis is not informative on theavailability or mobility of the metals; a metal speciationanalysis is therefore required. In this study, sludge samplesfrom conventional activated sludge wastewater treatment plants(WWTP) were collected at different stages of an anaerobicsludge treatment process. In these samples, the total metalcontent and the distribution of metal species were determined(Al, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Ti, Zn) followinga protocol of sequential extraction. Only 14% of the metalwas present in readily available forms in the treated sludges.In composted sludges, this value dropped to 6%.