Thermal effects on water retention behaviour of unsaturated collapsible loess

Journal of Soils and Sediments - Temperature has a significant influence on water retention curve (WRC) because temperature affects surface tension of water and volumetric behaviour of soil....     

A Novel High Capacity Biofilm Reactor System for Treatment of Domestic Sewage

A lab-scale novel biofilm reactor system, Ultra-Compact Biofilm Reactor (UCBR), was studied to investigate its performance and operational characteristics for domestic sewage treatment. The reactor was operated at four different hydraulic retention times, namely, 90, 60, 30 and 15 min. The operating ranges of volumetric loading rates in terms of COD, BOD₅, NH⁺ ₄-N and TKN were 5.6-62.1 kg COD/m³ d, 2.6-32.5 BOD₅/m³ d, 0.6-3.2 kg NH⁺ ₄-N/m³ d and 0.82-6.2 kg TKN/m³ d, respectively. The COD, BOD₅ and NH⁺ ₄-N removal efficiencies at 90-min hydraulic retention time (HRT) and 60-min HRT could exceed 80%, 90% and 99%, respectively. The corresponding maximum biomass concentrations were 12.0 g/L and 15.0 g/L at 90-min HRT and 60-min HRT, respectively. At 30-min HRT, the biomass concentration increased to a maximum of 24.0 g/L. However, COD and BOD₅ removal efficiencies decreased to 75% and 80%, respectively, while the NH⁺ ₄-N nitrification efficiency decreased to only 25% to 30%. These observations suggested that high biomass concentration alone was not sufficient to provide a high removal capacity in a UCBR. Further reduction in HRT to 15 min led to an excessive biomass decline from 22.5 g/L to 4.0 g/L. On the whole, the UCBR was able to sustain COD removal and NH⁺ ₄-N conversion of up to 5.96-18.70 kg COD/m³ d and 0.73-1.00 kg NH⁺ ₄-N/m³ d, respectively.     

Esterified phenolics of the cell walls of chufa (Cyperus esculentusL. ) tubers and their role in texture

Chufas (Cyperus esculentus) are edible tubers that, like Chinese waterchestnut (CWC), are very crisp when raw and do not soften when cooked. The present study compares the mechanical properties of chufas with those of potato and CWC in relation to the carbohydrate and phenolic compositions of the cell walls. The cutting toughness of raw chufa was higher than that of raw CWC and potato; its value decreased on boiling, as also observed with CWC, but remained over twice that of raw potato. Chufa cell walls were rich in xylose, arabinose, glucose, uronic acid, and galactose, with minor quantities of mannose. The cell walls of the parenchyma exhibited a uniform pH-dependent autofluorescence indicating the presence of cinnamic acid derivatives. Analysis of these revealed that peeled tuber cell walls are rich in ferulic acid, whereas p-coumaric acid dominates the monomeric phenol fraction of the skin. Cell wall material from both skin and peeled tubers contains a significant amount of different diferulic acids ( approximately 20% of the wall ferulic acid), consisting mainly of the 8-O-4'-, 8-5'-, and 5-5'-dimers. These are potentially available to form thermally stable cross-links between polysaccharides within the wall and between cells. This may confer thermal stability of texture.     

Policosanol has no antioxidant activity in human low-density lipoprotein but increases excretion of bile acids in hamsters

Policosanol is a group of long chain primary alcohols and has been shown to reduce blood cholesterol levels and to inhibit the oxidation of low-density lipoprotein (LDL). The present study examined (i) the effect of policosanol supplementation in the diet on the fecal excretion of neutral and acidic sterols in hamsters and (ii) the antioxidant activity of policosanol in human LDL. Golden Syrian hamsters were divided into four groups (n = 12/each) fed one of the four diets containing 0 (control), 0.38, 0.75, and 1.50 g kg(-1) policosanol for 6 weeks. It was found that hamsters given 0.38-1.5 g kg(-1) diets had a serum total cholesterol level lowered by 15-25% and had a high-density lipoprotein cholesterol elevated by 7-16.8%. It was found that policosanol increased the excretion of acidic sterols by 25-73%. Contrary to that in previous reports, policosanol had no apparent anti-LDL oxidation activity when 1-tetracosanol, 1-hexacosanol, and 1-octacosanol were incubated in human LDL. Policosanol also possessed no scavenging activity on the free radical2,2-diphenyl-1-picrylhydrazyl. These data provide evidence that in addition to the effect of HMG-CoA reductase, the cholesterol-lowering activity of policosanol is partially mediated by its inhibition on the absorption of bile acids, but these data disprove the claim that policosanol is an antioxidant.     

Identification of odorous gases originating from refuse waste

The complex mixture of gaseous compounds emitted from refuse wastes was scrubbed through an activated carbon column until odor breakthrough occurred. Refuse air samples were collected at the influent and effluent ports of the column for analysis on a gas chromatograph-mass spectrometer system. Sampling techniques involved the concentration of gaseous volatiles on Tenax GC adsorption tubes prior to thermal desorption onto a capillary fused-silica column for compound separation. Separated compounds were scanned by a quadrapole mass selective detector and compounds were matched against a library of mass spectra and available gas standards. Results indicated that the typical odorous gases emitted from refuse waste consisted mainly of carboxylic acids and some S compounds. Sensory tests revealed that a sweetish odor was associated with the carboxylic acids which eluted from the carbon column first.     

Physicochemical characteristics of onion (Allium cepa L.) tissues

The structure and mechanical properties of onions are important factors affecting their textural quality. The onion bulb consists of several layers of pigmented, papery scales surrounding fleshy storage scales that comprise an upper epidermis, an intermediate parenchyma tissue, and a lower epidermis. The purpose of this study was to examine the chemical composition of cell walls from the papery scales and outer fleshy scales of onion (Allium cepa L. cv. Sturon) in relation to their mechanical properties. Cell-wall material (CWM) was prepared from the component tissues and analyzed for its carbohydrate and phenolic composition. The CWMs were rich in uronic acid and glucose, with smaller quantities of arabinose, galactose, and xylose. In the fleshy scales, the lower epidermis contained relatively more galactose-rich pectic polysaccharides, whereas the upper epidermis and the papery scales contained virtually no galactose. Analysis of mechanical properties showed that the order of strength of the tissues was papery scales > fleshy scales, which were in the order lower epidermis > upper epidermis > intermediate parenchyma. The upper epidermis of fleshy scales was stronger in the vertical than the horizontal direction, and both orientations showed negligible notch sensitivity. Cyclohexane-trans-1,2-diaminetetraacetate-induced vortex-induced cell separation of the intermediate layer of fleshy scales indicated that calcium cross-linking may play an important role in cell-cell adhesion. A small but significant amount of ferulic acid was found in the walls, predominantly in the thick cuticle of the lower epidermis of fleshy scales. Alkali-labile wall-bound flavonoids were also detected.     

Atomic absorption spectrophotometric determination of selenium in animal feed premix, using the vapor generation technique.

An atomic absorption spectrophotometric method, using the vapor generation technique for the determination of selenium in animal feed premixes containing 0.4-0.002% selenium, is described. After the sample was digested in perchloric acid and hydrogen peroxide and reduced with 6M HCl, 3 aliquots of sample, each containing about 0.4 mug Se, were taken for analysis by the standard addition method. Sodium borohydride pellets were used for the generation of selenium hydride. The relative standard deviation of a single determination averaged +/- 19%.     

Molybdenum nanowires by electrodeposition

Metallic molybdenum (Mo(o)) wires with diameters ranging from 15 nanometers to 1.0 micrometers and lengths of up to 500 micrometers (0.5 millimeters) were prepared in a two-step procedure. Molybdenum oxide wires were electrodeposited selectively at step edges and then reduced in hydrogen gas at 500 degrees C to yield Mo(o). The hemicylindrical wires prepared by this technique were self-uniform, and the wires prepared in a particular electrodeposition (in batches of 10(5) to 10(7)) were narrowly distributed in diameter. Wires were obtained size selectively because the mean wire diameter was directly proportional to the square root of the electrolysis time. The metal nanowires could be embedded in a polystyrene film and lifted off the graphite electrode surface. The conductivity and mechanical resiliency of individual embedded wires were similar to those of bulk molybdenum.     

Hormesis: a response to low environmental concentrations of petroleum hydrocarbons

Crab zoeae (Rhithropanopeus harrisii) were exposed to water-soluble fractions of jet fuel (JP5) for the first 5 days or for the duration of zoeal development (11 to 14 days). Short-term exposure or continuous exposure to low concentrations of petroleum hydrocarbons caused no increase in mortality or changes in development rate, and increased megalopal weight was characteristic of such groups. This phenomenon, termed "hormesis," is probably a generalized aspect of environmental stress etiology but has seldom been reported as such.