Effect of nucleotides supplementation to low‐fish meal feed on long‐chain polyunsaturated fatty acid composition of juvenile rainbow trout Oncorhynchus mykiss

A feeding trial was conducted to evaluate the effect of nucleotides supplementation to low‐fish meal feed on growth and fatty acid composition of rainbow trout. Six isonitrogenous (42% crude protein) and isolipidic (18% crude lipid) diets were formulated containing fish meal and plant ingredients as main protein sources. The control diet was a basal diet without supplementation of nucleotides, and five experimental diets were prepared by supplementing one of the five different nucleotides in the form of 5′‐monophosphate (0.15%), that is inosine (IMP), adenosine (AMP), guanosine (GMP), uridine (UMP) and cytidine (CMP) onto basal diet. Two hundred forty juvenile rainbow trout with an initial average body weight 9.8 g were randomly distributed into twelve aquaria. After 15 weeks of feeding period, growth performance and feed utilization of rainbow trout were not significantly different among dietary treatments. Dietary GMP, UMP and CMP tended to accumulate crude lipid in the muscle and whole fish body. Moreover, dietary GMP, UMP and CMP significantly increased hepatic 18:3n‐3 and long‐chain homologue 18:4n‐3 and 20:4n‐3 contents. Hepatic 18:2n‐6 content showed also increase in fish fed GMP, UMP and CMP diets, but decreased in long‐chain homologue 20:3n‐6 and 20:4n‐6 contents. Decrease in 20:4n‐6, 20:5n‐3 and 22:6n‐3 contents was also found in the muscle of fish fed IMP, GMP and CMP diets. The present study clearly showed that there was no positive effect of dietary nucleotides on growth of fish, but dietary nucleotides particularly GMP, UMP and CMP altered polyunsaturated fatty acid composition of rainbow trout.     

Bone morphological analyses in Spontaneously Diabetic Torii (SDT) fatty rats

The Spontaneously Diabetic Torii (SDT) fatty rat, a model for obese type 2 diabetes, shows bone quantitative abnormalities, namely low bone mineral density (BMD). The objective of this study was to evaluate bone morphological changes, in particular identifying the bone qualitative abnormalities, in the SDT fatty rat. Male SDT fatty rats showed increases in total trabecular area and trabecular number and decreases in trabecular thickness in cancellous bones of the proximal tibia, indicating trabecular miniaturization. The SDT fatty rat is useful for investigation of pathophysiological changes in bone quality in diabetic osteoporosis.     

A review of seed production and stock enhancement for commercially important portunid crabs in Japan

We reviewed the present status of seed production for stock enhancement and evaluated the impact of stocking on commercial catches in Japan, of portunid crabs particularly Portunus trituberculatus and Scylla paramamosain. The mean survival rate from hatching to first-stage crabs was around 10%, and 20–30% of the larval culture trials conducted in recent years could not harvest juveniles during seed production. To achieve reliable mass seed production technologies, measures for controlling disease and the nutritional condition of larvae in seed production tanks are required to be developed. The main spawning season extends from April/May to July. Reflecting their life cycle characteristics such as high growth rates, crabs recruit to the fishery after September and largely contribute to the commercial landings until December in the hatching year. The main release season of juveniles is from June to July. Consequently, released juveniles are expected to contribute to commercial landings in the release year. Analyses of catch and release statistics in two small bays estimated the yield from released individuals (YPR, yield per release) at 2.4 g for P. trituberculatus and 3.3–7.7 g for S. paramamosain, which were similar to values reported from tagging surveys. On a major regional basis, catch and release histories of P. trituberculatus highlighted the impact of hatchery releases on commercial landings as 33.6 g YPR in the Seto Inland Sea, where catches and releases have been greatest. Although the YPR estimates were different between small bays and major regional seas, Japanese stock enhancement programmes should have had an impact on portunid crab production, dependent on the magnitude of the releases.     

Genetic organization of aromatic rice as revealed by RAPD markers: A case study in conserving crop genetic resources on farm

Summary On-farm conservation of landraces is one strategy to maintain the diversity of crop germplasm in local agro-ecosystems. The genetic structures of landraces are a key biological factor in on-farm conservation strategies. To accumulate a genetic understanding that will help establish a methodology for on-farm conservation, the genetic organization of landraces of aromatic rice in Namdinh province, Vietnam was analyzed using RAPD markers. Eighteen RAPD markers detected 38 genotypes among 320 aromatic rice samples growing at 23 sites of farmers' fields and in the experimental field that derived from 13 sites. Geographical variation was observed in the frequency of genotypes, whereas individual landraces could not be distinguished by RAPD markers. Genetic variation within a site was generally smaller than that among sites. The degree of genetic similarity of the plants in a site varied among sites, as did the number of genotypes. Changes in genetic structure over time were investigated using experimental populations each derived from approximately 30 plants from 13 farmers' fields. The differences detected by DNA markers between the genetic structural in the farmers' fields and those in experimental fields suggested that genetic drift is a major cause of these differences. The present study suggests that DNA markers are an essential means to monitor the genetic structures of heterogeneous landraces of rice, and are useful for selecting study sites for the on-farm conservation of genetic diversity as well as for successive monitoring.     

Evaluation of the fire endurance of mechanically graded timber in bending

AbstractThis study examined the performance of mechanically graded timber in bending when exposed to fire at various load ratios. The test specimens were 150 pieces, each with the dimensions of 60 × 120 × 3500mm. The modulus of elasticity (MOE) of 150 specimens was measured, and 60 among them were selected to formulate the prediction equation for MOE and modulus of rupture (MOR), which was used to predict the remaining 90 specimens. These were tested under fire exposure in bending using three-point loading at 11.1%, 16.7%, 33.3%, 66.7%, and 83.3% of the ultimate load. Using mechanically graded timber, which means acknowledging the actual strength of the bending member, permits fairly precise application to the targeted design load. This research confirmed that mechanically graded timber under fire exposure has the following tendencies: under the same load ratio, time to failure is independent of strength class, and, at any load ratio, the critical strength is dependent on the timber strength class. The obtained design bending strength under fire exposure using the reduced cross section method and the reduced strength method conformed to those calculated based on Eurocode 5. Following those findings, mechanically graded timber can be applied to obtain the design bending strength when taking into account the fire attack.     

Antifeedant activity of flavonoids and related compounds against the subterranean termiteCoptotermes formosanus Shiraki

Antifeedant activity of some flavonoids and their related compounds against the subterranean termiteCoptotermes formosanus Shiraki was examined with nochoice tests and two-choice tests. The activities of these compounds were evaluated in relation to their chemical structures. All flavonoids tested showed antifeedant activity, whereas catechinic acid, possessing no A-ring or pyran ring in the molecule, showed feeding-preference activity. For the structure-activity relations, it was found that compounds containing two hydroxyl groups at C-5 and C-7 in A-rings showed high antifeedant activity. Furthermore, the presence of a carbonyl group at C-4 in the pyran rings of the compounds was necessary for the occurrence of high activity. 3-Hydroxyflavones and 3-hydroxyflavanones with 3,4-dihydroxylated B-rings exhibited higher activity than those with 4-hydroxylated B-rings.Part of this paper was presented at the 49th annual meeting of the Japan Wood Research Society, Tokyo, April 1999     

Fire-resistant performance of a laminated veneer lumber joint with metal plate connectors protected with graphite phenolic sphere sheeting

Creep under fire of laminated veneer lumber (LVL) joined with metal connectors was studied. The fire-resistant performance of LVL butt joints connected with metal plates protected with graphite phenolic sphere (GPS) sheeting was discussed. The GPS sheeting was overlaid on the joint in different sizes and locations. The joint was exposed to a burner with a top flame temperature of 800°C and loaded with a load of 200 N to test for creep under fire. The results showed that the fire-resistant performance of the joint was markedly improved by the sheeting. The size and location of the GPS sheet significantly affected the time to rupture of the specimen, which was six times longer than that without GPS. Temperature measurements at the joint showed that the GPS sheeting distributed the heat along the surface and delayed failure. Thermographic images and analyses clarified the improvement in fire-resistant properties due to GPS.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.