Involvement of microaerophilic iron-oxidizing bacteria in the iron-oxidizing process at the surface layer of flooded paddy field soil

Journal of Soils and Sediments - To reveal whether microaerophilic Fe(II)-oxidizing bacteria (FeOB) participate in the Fe(II) oxidation at the oxic-anoxic interface in flooded paddy field soil,...     

Effect of nucleotides supplementation to low‐fish meal feed on long‐chain polyunsaturated fatty acid composition of juvenile rainbow trout Oncorhynchus mykiss

A feeding trial was conducted to evaluate the effect of nucleotides supplementation to low‐fish meal feed on growth and fatty acid composition of rainbow trout. Six isonitrogenous (42% crude protein) and isolipidic (18% crude lipid) diets were formulated containing fish meal and plant ingredients as main protein sources. The control diet was a basal diet without supplementation of nucleotides, and five experimental diets were prepared by supplementing one of the five different nucleotides in the form of 5′‐monophosphate (0.15%), that is inosine (IMP), adenosine (AMP), guanosine (GMP), uridine (UMP) and cytidine (CMP) onto basal diet. Two hundred forty juvenile rainbow trout with an initial average body weight 9.8 g were randomly distributed into twelve aquaria. After 15 weeks of feeding period, growth performance and feed utilization of rainbow trout were not significantly different among dietary treatments. Dietary GMP, UMP and CMP tended to accumulate crude lipid in the muscle and whole fish body. Moreover, dietary GMP, UMP and CMP significantly increased hepatic 18:3n‐3 and long‐chain homologue 18:4n‐3 and 20:4n‐3 contents. Hepatic 18:2n‐6 content showed also increase in fish fed GMP, UMP and CMP diets, but decreased in long‐chain homologue 20:3n‐6 and 20:4n‐6 contents. Decrease in 20:4n‐6, 20:5n‐3 and 22:6n‐3 contents was also found in the muscle of fish fed IMP, GMP and CMP diets. The present study clearly showed that there was no positive effect of dietary nucleotides on growth of fish, but dietary nucleotides particularly GMP, UMP and CMP altered polyunsaturated fatty acid composition of rainbow trout.     

Bone morphological analyses in Spontaneously Diabetic Torii (SDT) fatty rats

The Spontaneously Diabetic Torii (SDT) fatty rat, a model for obese type 2 diabetes, shows bone quantitative abnormalities, namely low bone mineral density (BMD). The objective of this study was to evaluate bone morphological changes, in particular identifying the bone qualitative abnormalities, in the SDT fatty rat. Male SDT fatty rats showed increases in total trabecular area and trabecular number and decreases in trabecular thickness in cancellous bones of the proximal tibia, indicating trabecular miniaturization. The SDT fatty rat is useful for investigation of pathophysiological changes in bone quality in diabetic osteoporosis.     

Chemical changes in steam-pressed kenaf core binderless particleboard

The effects of chemical changes in kenaf core binderless particleboards on the bonding performance and thickness swelling of boards were investigated by chemical and spectroscopic analyses. Mild steam-injection treatments (0.6–1.0MPa) caused significant degradation of hemicelluloses, lignin, and cellulose. Conventional hot pressing caused a lower degree of degradation of the chemical components. The hot-pressed kenaf core board without any binders showed poor bonding performance. Thus, it was found that partial degradation of the three major chemical components of the kenaf core by mild steam-injection treatment increased the bonding performance and dimensional stability of the binderless boards, and gave better quality binderless boards than those made by hot-pressing treatments.Part of this report was presented at the 4th International Wood Science Symposium, Serpong, Indonesia, September 2002; and at the 53rd Annual Meeting of The Japan Wood Research Society, Fukuoka, March 2003     

Removal of trichloroethylene from aqueous solution by pyrolyzed Japanese cedar bark

The bark of Japanese cedar (Cryptomeria japonica D. Don) was heated in an N₂ atmosphere at 300–900C for 3h to investigate the surface properties of the pyrolyzed residuces and their ability to remove trichloroethylene (TCE) from aqueous solutions. The specific surface areas (S _N) and total pore volumes (V _N) of the pyrolyzed barks steadily increased with rising pyrolysis temperature; no significant differences in the average pore diameters (D _N) were observed at higher temperatures (600–900C). The adsorption capacities of the pyrolyzed residues for TCE were determined under batch mode conditions using an aqueous solution containing 500g TCE dm^–3. The adsorption data were well fitted to the Freundlich equation. The adsorption capacity of the bark pyrolyzed at 900C was about five times larger than that of commercial activated carbon.This study was presented at the 10th International Symposium on Wood and Pulping Chemistry, Yokohama, June 1999     

Evaluation of the fire endurance of mechanically graded timber in bending

AbstractThis study examined the performance of mechanically graded timber in bending when exposed to fire at various load ratios. The test specimens were 150 pieces, each with the dimensions of 60 × 120 × 3500mm. The modulus of elasticity (MOE) of 150 specimens was measured, and 60 among them were selected to formulate the prediction equation for MOE and modulus of rupture (MOR), which was used to predict the remaining 90 specimens. These were tested under fire exposure in bending using three-point loading at 11.1%, 16.7%, 33.3%, 66.7%, and 83.3% of the ultimate load. Using mechanically graded timber, which means acknowledging the actual strength of the bending member, permits fairly precise application to the targeted design load. This research confirmed that mechanically graded timber under fire exposure has the following tendencies: under the same load ratio, time to failure is independent of strength class, and, at any load ratio, the critical strength is dependent on the timber strength class. The obtained design bending strength under fire exposure using the reduced cross section method and the reduced strength method conformed to those calculated based on Eurocode 5. Following those findings, mechanically graded timber can be applied to obtain the design bending strength when taking into account the fire attack.     

Antifeedant activity of flavonoids and related compounds against the subterranean termiteCoptotermes formosanus Shiraki

Antifeedant activity of some flavonoids and their related compounds against the subterranean termiteCoptotermes formosanus Shiraki was examined with nochoice tests and two-choice tests. The activities of these compounds were evaluated in relation to their chemical structures. All flavonoids tested showed antifeedant activity, whereas catechinic acid, possessing no A-ring or pyran ring in the molecule, showed feeding-preference activity. For the structure-activity relations, it was found that compounds containing two hydroxyl groups at C-5 and C-7 in A-rings showed high antifeedant activity. Furthermore, the presence of a carbonyl group at C-4 in the pyran rings of the compounds was necessary for the occurrence of high activity. 3-Hydroxyflavones and 3-hydroxyflavanones with 3,4-dihydroxylated B-rings exhibited higher activity than those with 4-hydroxylated B-rings.Part of this paper was presented at the 49th annual meeting of the Japan Wood Research Society, Tokyo, April 1999     

Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Fire-resistant performance of a laminated veneer lumber joint with metal plate connectors protected with graphite phenolic sphere sheeting

Creep under fire of laminated veneer lumber (LVL) joined with metal connectors was studied. The fire-resistant performance of LVL butt joints connected with metal plates protected with graphite phenolic sphere (GPS) sheeting was discussed. The GPS sheeting was overlaid on the joint in different sizes and locations. The joint was exposed to a burner with a top flame temperature of 800°C and loaded with a load of 200 N to test for creep under fire. The results showed that the fire-resistant performance of the joint was markedly improved by the sheeting. The size and location of the GPS sheet significantly affected the time to rupture of the specimen, which was six times longer than that without GPS. Temperature measurements at the joint showed that the GPS sheeting distributed the heat along the surface and delayed failure. Thermographic images and analyses clarified the improvement in fire-resistant properties due to GPS.