Maize defence mechanisms against the European corn borer,Ostrinia nubilalis Hübner (Lepidoptera: Crambidae)

Maize is arguably the most widely grown crop in the world, but it is often associated with one of its major insect pests, the European corn borer (ECB). The damage caused by this species to maize production is generally variable, but in many cases it is economically significant. This review paper provides an overview of the research findings on the natural plant defence mechanisms against ECB larvae published till now. What is resistance and how it is achieved, what is the chemical response of maize plants to insect feeding and how tolerance can be increased. A short introduction in breeding for resistance and a discussion if the mentioned traits can be used in conventional breeding in order to create maize hybrids less affected by ECB are given.     

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.     

Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

Differential overstory leaf flushing contributes to the formation of a patchy understory

Understory individuals were found to form patches in a 100-year-old deciduous broad-leaved forest. The closed forest canopy was uniform, and so the light conditions at various locations across the forest floor differed little after the leaf flush of the overstory. To explain the distribution pattern in the understory, a hypothesis was proposed: in spring, the forest floor is divided into patches according to the timing of leaf flush of the overstory individuals, and the light conditions are more favorable for understory plants under the crowns of trees with later-flushing leaves. In the plot, three groups of early, intermediate, and late, were recognized in the overstory concerning the timing of leaf flush. As for the start of leaf flush, a difference of 31.6 days was recognized among tree species, and for the end of leaf flush, a difference of 40.3 days. In the spring of 1998, the relative photosynthetic-photon-flux density under an intensively studiedCastanea crenata tree (late-flushing species) usually showed higher values than that under a similarly studiedAcer mono tree (early-flushing species). Analysis of the spatial-distribution pattern using Morisita’s1δ index revealed that the understory community had an aggregated distribution. In the overstory, the late- and the intermediate-flushing-species groups showed aggregated distributions, while the early-flushing-species group showed random distribution. Spatial correlation between the understory and the overstory was analyzed by using Morisita’sRδ index. The distribution of whole understory community spatially co-occurred with that of the late-flushing-species group of the overstory. In contrast, the understory community was less developed below the members of the early-flushing-species group of the overstory. We consider that the data presented here support our hypothesis, and we suggest that the growth and survival of understory individuals were promoted in the places receiving light for long periods in spring.     

Comparison of stand dynamics after dieback caused by pine wilt disease among pine forests with different management regimes in western Japan

In pine forests damaged by pine wilt disease, in western Japan, the effect of protection regimes of pine trees on the stand dynamics were examined in the following four stands: (1) lightly damaged stand (age 30–40 years) with no procedure in operation for protecting pine trees; (2) severely damaged stand (age 30–40 years) with no procedure in place for protecting pine trees; (3) severely damaged stand (age 50 years) with a selective cutting of infected trees; (4) severely damaged stand (age 30–40 years) with a selective cutting of infected trees. All the stands had been abandoned before the pine wilt disease damage. The understory structure of the severely damaged stand with no protection procedure was similar to that of the lightly damaged stand. Frequent invasion by tree species and acceleration in the growth of understory trees occurred after the dieback in the selective cutting stand. These results suggest that a deficiency in the canopy layer caused by the dieback resulted in low disturbance intensity in the early stages after the dieback, but the selective cutting increased the intensity by the reduction in the understory as well as the canopy layer. The intensity of the disturbance in the selective cutting stands was larger in the younger stand because it had a higher density of selectively cut pine trees. The different stand structure of pine forests occurred after the dieback because the intensity of the disturbance varied as a result of the selective cutting operation and the stand age.     

Nondestructive test and prediction of modulus of elasticity of veneer-overlaid particleboard composite

The effects of grain angle, thickness of face veneer, and shelling ratio on dynamic modulus of elasticity (E) of veneer-overlaid particleboard composite (VOP) were examined by using nondestructive test. In this study, the possibility that E of VOP can be predicted by means of some empirical formula was also discussed. This study has shown that grain angle, thickness of face veneer, and shelling ratio have substantial effects on E of VOP. The E at 0° of grain angle of face veneer was the largest, decreasing rapidly with increase in the grain angle. The lowest value of E occurred at 90° of grain angle of face veneer. The relationship between grain angle of face veneer and E of VOP can be expressed in the form of Jenkin’s and Hankinson’s equations. The orthotropic properties of wood and VOP defined as the ratio E ₀/ E ₉₀ were 25.7 for wood and 4.7 for VOP. When the grain direction of face veneer was parallel to the length of the specimens, the E of VOP increased with increasing shelling ratio. VOP increased E from 125 to 179% over that of the particleboard and veneer thickness from 2.1 upto 3.6 mm. However, when the grain direction of face veneer was perpendicular to the length of the specimens, the E of VOP decreased with increasing shelling ratio. VOP decreased E from 23 to 41% over that of the particleboard and veneer thickness from 2.1 upto 3.6 mm. The relationship between E of VOP and face veneer thickness can be expressed in the form of a second-order parabolic equation. Rule of Mixture (ROM) can be used to predict E of VOP from the E of wood element and particleboard element.     

Absolute configuration of arylglycerol-β-aryl ethers obtained by asymmetric reduction of the correspondingα-ketonic compound with intactFusarium solani cells

When (±)--oxo-guaiacylglycerol--(vanillic acid) ether (1) is degraded byFusarium solani M-13-1, the-ketone is initially reduced to giveerythro andthreo guaiacylglycerol--(vanillic acid) ethers (2), arylglycerol--aryl ethers, both of which are enantiomerically pure. The absolute configuration in each2 was determined by Mosher's method; the products were converted to,-di-(R)--methoxy--trifluoromethylphenylacetates (MTPA esters) (3) oferythro (-)- andthreo (+)-veratrylglycerol--(methyl vanillate) ethers (3), whose¹H nuclear magnetic resonance (NMR) spectra were examined and compared with those of four di-(R)-MTPA ester (3) diastereomers from chemically synthesizederythro (±)-3 andthreo (±)-3. To assign the- and-MTPA-OCH₃ peaks, the¹H NMR scans of several compounds that have substructures of 3 and their 3,4,5-trimethoxyphenyl analogues were examined. When a racemic alcohol reacts with (R)-MTPA to give a pair of (R)-MTPA ester diastereomers, the value was defined as the absolute value of the difference in the¹H chemical shifts of the peak between the diastereomers. It was found that the values of-MTPA-OCH₃ were larger than those of-MTPA-OCH₃ owing to a shielding effect of the veratryl ring located on the-MTPA-OCH₃, and that the-MTPA-OCH₃ peaks in the 3,4,5-trimethoxyphenyl compounds shifted downfield relative to those in the veratryl compounds. On the basis of the¹h NMR data of (R)-MTPA esters, the absolute configuration of the four chemically prepared diastereomers (3) were determined. The catabolicerythro 3 [fromerythro (-)-3] andthreo 3 [fromthreo (+)-3] were identical to (R, S, R)-erythro 3 and (R, S, S)- threo 3, respectively. An hydrogen species in the fungal reduction would attack the-ketone fromre-face of both (R)-1 and (S)-1, givingerythro (S, R)-2 andthreo (S, S)-2, respectively.Part of this paper was presented at the 33rd Lignin Symposium, Tsukuba, November 1988