Comparison of cholesterol levels among lipoprotein fractions separated by anion-exchange high-performance liquid chromatography in periparturient Holstein–Friesian dairy cows

Changes in lipoprotein profiles occur in dairy cows during the periparturient period and in cows with transition cow disease. Here, the lipoprotein profiles of Holstein–Friesian dairy cows during the periparturient period were obtained by anion-exchange, high-performance liquid chromatography to evaluate the usefulness of lipoprotein profile evaluation during the periparturient period and in cows with fatty liver and milk fever. Lipoprotein levels (including total and high- (HDL-C) and low-density lipoprotein (LDL-C) cholesterol) in 10 healthy cows were low 4 weeks prepartum, with the lowest values at calving or within 1 week of calving; the values increased at 8 weeks postpartum. The lipoprotein levels were measured in 16 cows diagnosed with fatty liver (n=10) or milk fever (n=6) and compared to 10 healthy dairy cows. A significant difference was observed in HDL-C between healthy cows (at calving and 1 week postpartum), and the fatty liver and milk fever cows. Cows with fatty liver and milk fever had a lower mean HDL-C than the 10 healthy dairy cows at calving and 1 week postpartum. HDL-C might be a good indicator of energy balance for differentiating healthy cows from those with transition cow disease.     

Probabilistic evaluation of the final moisture content of kiln-dried lumber using the bootstrap method

This paper presents a probabilistic method of evaluating the final moisture content (MC) of lumber obtained at the end of the kiln-drying process. The final MC data of three different drying tests conducted in past studies were analyzed using the bootstrap method. Target MC was tentatively set below 20 % in the analysis. Two characteristic parameters representing the final MC were estimated with bootstrap confidence intervals. These parameters were the standard deviation (SD) and the percentage of the population that met the MC requirement of less than 20 % (P ₂₀). The histograms of the final MC and the subsequent goodness-of-fit tests revealed that the final MC data of two drying tests did not follow any classical probability distributions, including Normal, Log-Normal, Weibull, and Gamma distributions, thus indicating the need for nonparametric statistics. The uncertainty of the final MC could be evaluated with the estimated SD and P ₂₀. After deriving the relationships between P ₂₀ and the corresponding probability that P ₂₀ is not achieved, we demonstrated how such relationships could provide a kiln operator with information to facilitate better decision-making in optimizing a drying schedule.     

The method for designing the profile of forest roads supported by genetic algorithm

This study examines a method for designing an optimum profile of a forest road in a short matter of time. In this method, a genetic algorithm (GA) searches for points where the gradient changes and dynamic programing (DP) designs the longitudinal slope. This method can be applied to the ground heights of an actual forest road. The evaluation function of the DP assesses the total expenditure. The inverse of this function is the fitness function. Crossover and mutation are operators of an evolution simulation of a GA. They are each repeated 20 times and 420 profiles are designed and assessed, all within about 10 min. A comparison of the profile designed by the GA with that of an actual forest road shows only one section where the formation level differed substantially. Overall, both profiles seem to show a high degree of correspondence. From this result, we believe that the profile designed by the GA is best, or the one of the best. A conventional method takes about 65 h to calculate all changing points of gradients. However, by using the GA, the calculation time was reduced to about 1/389 that of the coventional method, showing that the method which uses the GA through the profile design is very useful.     

Polymer distribution in the cell wall of a wood-polyethylenimine composite

Summary A light microscopic (LM) visual technique to determine the polyethylenimine (PEI) distribution in a wood-PEI composite was studied by the adsorption of acid red or the circulation of Cu(II) ion with PEI in the composite. The amount of the adsorbed dye or Cu(II) on the composite increased linearly with an increase in the PEI content of the wood-PEI. The dyed composites were observed with LM under monochromatic light, corresponding to their absorption maxima at 560 nm for acid red and at 640 nm for copper chelate. The microscopic image was photographically recorded and the negative was subjected to densitometric analysis. At a polymer content lower than 4% in the composite, about 70% of total polymer was located in the middle lamella region, leaving only 30% in the secondary wall. With increasing PEI content of the composite, the concentration in the secondary wall increased, and about 80% of the polymer was located in the secondary wall at a PEI content of 27%. There were no noticeable differences between the amount of polymer detected by dyeing with acid red and by chelating with Cu(II). From the results of the line analysis of the intensity of the characteristic X-ray of uranium, the distribution of the PEI in the cell wall agreed closely with that determined by the LM method. It was concluded that the LM visual technique to determine the PEI location in the wood-PEI composite by dyeing with acid red or by chelating with Cu(II) is a simple and reliable method.     

Effect of moisture content of members on mechanical properties of timber joints

To investigate the effect of moisture content (MC) of members on the mechanical properties of timber joints, bending tests of precut joints and shear tests of dowel-type joints were carried out using timbers of Japanese cedar (Cryptomeria japonica D. Don) with three moisture conditions: green, kiln-dried with a MC target of 15%, and over-kiln-dried with a MC target of 5%. For the bending test, timbers were processed with a precut processing machine into “koshikake-ari” (a kind of dovetail joint) and “koshikake-kama” (a kind of mortise and tenon joint). A pair of members was jointed together without mechanical fasteners. Bolts (diameter = 12 mm) and nails (diameter = 2.45 mm) were used as dowels in the shear test. Bolted joints were constructed with one bolt and two metal side plates. Two nails and two metal side plates were used for the nailed joint. For precut joints, no clear effect of MC was recognized on maximum moment and initial stiffness. The maximum strength of mechanical joints assembled with kiln-dried wood was changed by the degree of drying. Stiffness of the joints assembled with kiln-dried specimens was larger than that of the joints assembled with green specimens.Part of this study was presented at the 7th International IUFRO Wood Drying Conference, Tsukuba, July 2001     

Dynamic excitation and static loading tests of glulam lattice floor

A wooden lattice floor with high stiffness and damping capacity has been developed to solve noise problems in wooden apartment houses. The lattice floor consisted of Douglas fir glulam beams with inserted steel plate joints and drift pins. To examine the structural performance of the floor, dynamic excitation and static loading tests were conducted on the full size floor. The first and second order resonance frequencies of the floor were 13.5Hz and 27.0Hz, respectively. These frequencies are similar to the peak frequency of a conventional wooden floor and the combined floor fabricated from glued laminated timber and iron. The maximum static load of the floor was 127kN. The apparent flexural rigidity was less than half the value of several floors studied in the past. However, it is considered that the stiffness is improved by constructing panels and this floor has almost equivalent performance. Relative deflection was not affected by the loading history.Part of this study was presented at the International Wood Engineering Conference, New Orleans, October 1996.     

Structure of xylan from culms of bamboo grass (Sasa senanensis Rehd.)

Xylan prepared from culms of kumaizasa (Sasa senanensis Rehd.), a representative species of bamboo grass, was hydrolyzed with-xylanase ofStreptomyces olivaceoviridis E-86. Four arabinoxylo-oligosaccharides and two glucuronoxylo-oligosaccharides were isolated from the enzymatic hydrolysate of the xylan by chromatography on a charcoal column, a Dowex 1-x8 column, a Toyo-pearl HW-40S column, and a LiChrospher 100 NH₂ column and on preparative paper chromatography. The results of the structural analyses of the saccharides showed that the isolated oligosaccharides had the structures of 3²--l-arabinofuranosyl-xylobiose, 3²--l-arabinofuranosyl-xylotriose, 3²--[-d-xylopyranosyl-(1 2)-l-arabinofuranosyl]-xylobiose, 3³--[-d-xylopyranosyl-(1 2)-l-arabinofuranosyl]-xylotriose, 2³--4-O-methyl-d-glucuronosyl-xylotriose, and 2³--d-glucuronosyl-xylotriose. From the structural analysis of the oligosaccharides derived from the xylan, kumaizasa xylan was concluded to be a kind of arabinoglucuronoxylan having not only stubs of singlel-arabinose and singled-glucuronic acid but also stubs of disaccharide units such as-d-xylopyranosyl-(1 2)-l-arabinofuranose.     

Quantitative nested real-time PCR detection of <Emphasis Type="Italic">Verticillium longisporum</Emphasis> and <Emphasis Type="Italic">V. dahliae</Emphasis> in the soil of cabbage fields

Verticillium longisporum and V. dahliae, causal agents of Verticillium wilt, are spreading through the cabbage fields of Gunma Prefecture. Using the V. longisporum-specific intron within the 18S rDNA and differences between ITS 5.8S rDNA sequences in Japanese isolates of V. longisporum and V. dahliae, we developed three quantitative nested real-time (QNRT) PCR assays. The QNRT-PCR quantification of V. longisporum or V. dahliae in cabbage field soil was consistent with the severity of Verticillium wilt disease in those fields. In field trials of resistant cultivar YR Ranpo grown for three seasons in soil infested with the pathogen, disease severity and pathogen density in the soil were significantly reduced in a field moderately contaminated by V. dahliae, but only slightly reduced in a highly contaminated field. These results suggest that continuous cultivation of a resistant cultivar is an effective way to reduce the pathogen population. QNRT-PCR assays provide a powerful analytical tool to evaluate the soil population dynamics of V. longisporum and V. dahliae for disease management.     

Growing situation of afforested trees and damage to lower-story trees caused by felling in multi-storied forest management in Peninsular Malaysia

The growing condition of afforestation trees and damage to lower-story trees caused by felling and hauling of upper-story trees in a multi-storied forest in Peninsular Malaysia was surveyed. Seventy months have passed since the planting ofAcacia mangium upperstory trees, which have grown 233 m³/ha in volume. The growth ofShorea leprosula thirty-five months after planting of lower-story trees have reached 5.54 m in height. However, as the ratio of height to basal diameter exceeds 100:1, trees are tapering to a considerable degree. A backhoe was installed in order to fell the upper-story trees. From the results of logging, the damage ratio estimation of the lower-story trees was simulated by using the Monte Carlo method. The damage ratio differed considerably depending on planting patterns, height of upper-story trees and felling skills. The results of this survey proved that the felling and hauling of upper-story trees would be technically feasible in the future, except when one row upper-story trees and one row lower-story trees method were employed.