Relationships between reflectance and absorbance chlorophyll indices with RGB (Red,Green, Blue) image components in seedlings of tropical tree species at nursery stage

Methods based on RGB (Red, Green, Blue) image segmentation may emerge as a new and low-cost method for estimation the quality of tree seedlings. However, the vast number of indexes based on the use of the RGB image segmentation and the lack of references in the literature still hinder the widespread use of this technology. Thus, we conducted a study aiming to test the relationships between methods based on absorbance and reflectance, widely used for the estimation of chlorophyll contents and physiological status of trees, and ten indexes based on RGB component analysis. We used leaves of five tropical tree species, belonging to different botanical families. Leaf absorbance was measured using the handheld chlorophyll meter SPAD-502, reflectance was measured using a spectrometer and the RGB indices were obtained from digitalized images of the leaves using a flatbed scanner. Modified linear regression models including all five species were used to relate RGB indices to absorbance and reflectance indices. Data collected from leaves of seedlings of five tropical tree species indicated that digital image processing technology can be a useful and rapid nondestructive method for assessment of physiological status of tree seedlings at nursery stage. Among the RGB indexes tested in this study the R, 2R*(G???B)/(G?+?B) and 2G*(G???B)/(G?+?B) are the most promising for analysis the tropical seedlings physiological status and quality.

     

Temporal and spatial progress of the diseases caused by the crinivirus tomato chlorosis virus and the begomovirus tomato severe rugose virus in tomatoes in Brazil

Efficient management of whitefly-borne diseases remains a challenge due to the lack of a comprehensive understanding of their epidemiology, particularly of the diseases tomato golden mosaic and tomato yellowing. Here, by monitoring 16 plots in four commercial fields, the temporal and spatial distribution of these two diseases were studied in tomato fields in Brazil. In the experimental plots these diseases were caused by tomato severe rugose virus (ToSRV) and tomato chlorosis virus (ToCV), respectively. The incidence of each virus was similar in the plots within a field but varied greatly among fields. Plants with symptoms for both diseases were randomly distributed in three of four spatial analyses. The curves representing the progress of both diseases were similar and contained small fluctuations, indicating that the spread of both viruses was similar under field conditions. In transmission experiments of ToSRV and ToCV by Bemisia tabaci MEAM1 (former biotype B), these viruses had a similar transmission rate in single or mixed infections. It was then shown that primary and secondary spread of ToCV were not efficiently controlled by insecticide applications. Finally, in a typical monomolecular model of disease progress, simulation of the primary dissemination of ToSRV and ToCV showed that infected plants were predominantly randomly distributed. It is concluded that, although the manner of vector transmission differs between ToSRV (persistent) and ToCV (semipersistent), the main dispersal mechanisms are most probably similar for these two diseases: primary spread is the predominant mechanism, and epidemics of these diseases have been caused by several influxes of viruliferous whiteflies.     

A comparison of popular approaches to optimize landscape resistance surfaces

Landscape Ecology - Landscape resistance surfaces are often used to address questions related to movement, dispersal, or population connectivity. However, modeling landscape resistance is...     

Radiation-Induced Breeding in Camelina Sativa

Journal of Crop Science and Biotechnology - The ionizing radiation methods, including X-rays, gamma rays, and neutrons to create variation is well established and used in major crops. Many...     

Prediction of Genetic Gain in Sweet Corn using Selection Indexes

Journal of Crop Science and Biotechnology - The cultivation of sweet corn is expanding in Brazil, but there are serious constraints about the availability of commercial cultivars. The selection of...     

Soil quality assessments in integrated crop–livestock–forest systems: A review

Integrated crop–livestock–forest is a promising strategy to improve soil quality. It comprises four different integrated farming systems: crop–livestock, crop–forest, forest–livestock and crop–livestock–forest. This work systematically reviewed studies about integrated crop–livestock–forest systems and soil quality. A total of 92 papers were retrieved from the Web of Science—Clarivate Analytics platform, and the following information was analysed: publication year, institution, region of the studied site, type of integrated system, soil type, tillage system, maximum soil depth and the soil quality indicators assessed. Most studies were published in the second half of the 2010s. Brazil is a prominent focus of research about soil quality and integrated crop–livestock–forest systems, with significant contribution from its central and southern regions. The Embrapa was the main publishing institution, present in over one‐third of the studies. Crop–livestock was the most common integrated system, Ferralsols was the most common soil group, and most of the studied soils were clayey. No tillage was the main tillage system. Most studies focused on the topsoil, assessing physical and/or chemical soil quality indicators. More emphasis on biological indicators of soil quality is required, as well as assessments integrating biological, physical and chemical indicators of soil quality. Future works should compare different integrated systems, including assessments deeper in the soil profile, especially in systems with the forest component, and also in sandy and silty soils. Soil quality indicators that have been rarely used should be further tested. Novel indicators should be added to better understand the promotion of soil quality by integrated crop–livestock–forest systems.     

Combining ability of common bean parents in different seasons,locations and generations

The objectives of this study were to obtain information about genetic parameters of a partial diallel in common bean, as well as to evaluate the effects of growing seasons, locations and generations in these estimates in order to define the best strategies for the use of diallel analysis as methodology of selection of parents and populations in common bean breeding. Twelve parents were crossed in a partial diallel scheme (5?×?7), and the F₁ and F₂ generations were evaluated in four experiments (I, II, III, and IV). The effects of seasons were determined in the Experiments I and II, in which the F₁ generation was evaluated in two distinct growing seasons. To quantify the effect of locations, we used Experiments III and IV, in which the F₂ generation was evaluated in the same season, but at different locations, and to quantify the effect of generations, the experiments II (generation F₁) and III (F₂ generation) were evaluated in the same season and location. As for grain yield the genetic control varied according to the environment. An effect of interaction on the genetic parameters of the diallel was observed for generation, whereas for grain yield, effects of season and location were observed. For plant architecture, parental combining ability should therefore be estimated using the F₁ generation, while for grain yield, both the F₁ and F₂ can be used. The recombination between the best hybrids is a promising strategy for extraction of superior black bean lines.     

Lippia alba (Verbenaceae) hydrolate as sedative of tambaqui (Colossoma macropomum) juveniles in simulated transport conditions

Lippia alba hydrolate (LAH) is produced as a secondary product in essential oil extraction. The objective of this study was to evaluate the use of LAH in a simulation of the transport of tambaqui (Colossoma macropomum) juveniles. A series of 17 hr simulations were performed using load densities of 30, 60 and 90 juveniles per L and four LAH concentrations of 0.4%, 1%, 2% and 5%, with a control of just water. Fish survival, temperature, dissolved oxygen, conductivity, pH, ammonia excretion, alkalinity water hardness and net Na⁺, K⁺, Cl^‐ fluxes, were all evaluated before and after the transport simulations. Mucous cell densities in the gills were also determined microscopically, post simulation. The results showed that addition of 5% LAH achieved better survival during the simulation than the water control. Dissolved oxygen was significantly lower with an increased load density. Also, conductivity, NH₄ excretion and net ionic fluxes (K⁺ and Cl^?) were lower with 5% LAH, although mainly where higher load densities were tested. Mucous cell density was lower in LAH concentrations of 2% and 5%, again with higher load densities. In view of these findings, it is suggested that 5% LAH is an effective sedative for use in the transport of tambaqui, mainly with high load densities. This work is the first study of LAH and highlights its potential applications in aquaculture management.     

The future of fish passage science,engineering, and practice

Much effort has been devoted to developing, constructing and refining fish passage facilities to enable target species to pass barriers on fluvial systems, and yet, fishway science, engineering and practice remain imperfect. In this review, 17 experts from different fish passage research fields (i.e., biology, ecology, physiology, ecohydraulics, engineering) and from different continents (i.e., North and South America, Europe, Africa, Australia) identified knowledge gaps and provided a roadmap for research priorities and technical developments. Once dominated by an engineering‐focused approach, fishway science today involves a wide range of disciplines from fish behaviour to socioeconomics to complex modelling of passage prioritization options in river networks. River barrier impacts on fish migration and dispersal are currently better understood than historically, but basic ecological knowledge underpinning the need for effective fish passage in many regions of the world, including in biodiversity hotspots (e.g., equatorial Africa, South‐East Asia), remains largely unknown. Designing efficient fishways, with minimal passage delay and post‐passage impacts, requires adaptive management and continued innovation. While the use of fishways in river restoration demands a transition towards fish passage at the community scale, advances in selective fishways are also needed to manage invasive fish colonization. Because of the erroneous view in some literature and communities of practice that fish passage is largely a proven technology, improved international collaboration, information sharing, method standardization and multidisciplinary training are needed. Further development of regional expertise is needed in South America, Asia and Africa where hydropower dams are currently being planned and constructed.