Iron uptake in a bicarbonate-resistant cell line of tobacco

Abstract

In alkaline soils, plant growth is impaired mainly by high pH and high concentration of bicarbonates. The bicarbonate concentration increases the pH value, and causes deficiency of iron. A bicarbonate-resistant cell line (BR line) of tobacco (Nicotiana tabacum L. cv. Burley21) was selected by adding excess bicarbonate ions (20 mmol L^?1) to the culture medium. The pH of the medium was buffered 8.0 to 8.3. Under these conditions, about 80% of iron in the medium became insoluble. However, under such conditions, the BR line grew well. In this report, we examined some characteristics of the growth and iron uptake in the BR line under iron-deficient (i.e. high pH or no-iron) condition. At pH 5.8, the Fe³⁺ reduction activity was not significantly different between the non-selected line and the BR line. At pH 8.0, however, the Fe³⁺ reduction activity of the BR line was higher than that of the non-selected line. In no-iron condition, the growth of the non-selected line was markedly reduced after 2 weeks, while the BR line was not affected. The content of malic acid in both lines increased with the medium pH, and the content in the BR line was higher than that in the non-selected line. The BR line was able to adapt to the conditions, which restricted iron uptake, such as high bicarbonate concentration, high pH, and low iron conditions. The high ability of Fe³⁺ reduction was maintained at even high pH conditions. Further, the BR line may be able to improve the utilization of iron in the cells.     

Molecular characterization of A2 and D strains of Soybean mosaic virus, which caused a recent virus outbreak in soybean cultivar Sachiyutaka in Chugoku and Shikoku regions of Japan

Coat protein sequences of two isolates in strain A₂ and five isolates in strain D of Soybean mosaic virus (SMV), which caused a recent mosaic outbreak in soybeans (cv. Sachiyutaka) in Chugoku and Shikoku in Japan, were compared to published data on 15 other Asian-origin isolates. Sequence comparison and cluster analysis showed that SMV isolates of strain A₂ from these districts were closely related, as were those of strain D, but strains A₂ and D were not. Thus, the two strains may have different origins and be carried through seed transmission.     

Synthesis and insecticidal activity of benzoheterocyclic analogues of N'-benzoyl-N-(tert-butyl)benzohydrazide: Part 3. Modification of N-tert-butylhydrazine moiety

Nineteen analogues were synthesized by modifying the tert-butylhydrazine moieties of N'-tert-butyl-N'-(3,5-dimethylbenzoyl)-5-methyl-2,3-dihydro-1,4-benzodioxine-6-carbohydrazide and N'-tert-butyl-N'-(3,5-dimethylbenzoyl)-5-methylchromane-6-carbohydrazide (chromafenozide), and the synthesized analogues were evaluated for their insecticidal activity against Spodoptera litura F. While all of the synthesized analogues had insecticidal activity inferior to those of the lead compounds, several of the analogues nonetheless showed high insecticidal activity. Chromafenozide has shown very high selectivity toward lepidopteran species.     

Effects of amino nitrogen on fermentation parameters by mixed ruminal microbes when energy or nitrogen is limited

Ruminal microbes harvested from a ruminally fistulated cow were incubated in simple batch and semicontinuous cultures with NH₃‐N or amino‐N on nitrogen‐ or energy‐excess diets in quantity (HN and LN diets, respectively, consisting of timothy hay plus soybean meal, or corn grain), based on evaluation with the National Research Council and Cornell Net Carbohydrate and Protein System models. In a batch culture experiment, supplementation with amino‐N promoted digestion and fermentation in the course of incubation (4–24 h) on both diets, but these effects mostly disappeared when the diets were sufficiently digested (at 48 h). In a semicontinuous culture experiment using Rusitec, no effect of amino‐N was exhibited after sufficient fermentation and digestion, but significant promotion of digestion was shown in the course of incubation on the HN diet, while no such effect was detected on the LN diet. The microbial yield for 24 h did not show a significant difference between the N sources of either of the two diets. These results suggest that the stimulatory effects of amino‐N are diminished when the diets are sufficiently digested after a long retention and incubation, and also that the effectiveness of amino‐N does not require a quantitatively energy‐excess status.     

Allometric model of the Reineke equation for Japanese cypress (<Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis>) and red pine (<Emphasis Type="Italic">Pinus densiflora</Emphasis>) stands

An allometric model that explains the mechanism of the difference in the slope of the Reineke equation (A) among species was proposed based on the allometric relationships of mean tree height (H) to quadratic mean diameter D (H ∝ D ^θ ) and stand density N (H ∝ N ^δ ), i.e., A = θ/δ. The proposed model was fitted to Japanese cypress (Chamaecyparis obtusa Endl.) and red pine (Pinus densiflora) stands. The allometric exponents θ and δ were, respectively, 0.8995 and −0.5000 for cypress and 0.8612 and −0.6619 for pine. The difference between cypress and pine was significant for δ but not for θ. Inserting the exponents into the model resulted in predicted slopes of −1.7991 for cypress and −1.3011 for pine. The difference in the slope of the Reineke equation between the two species was produced by characteristics related to the tree crown, rather than characteristics related to stem slenderness. The proposed model enables us to estimate the slope of the Reineke equation from commonly measured stand attributes, such as mean tree height and quadratic mean diameter. Therefore, the proposed model is expected to be practical and convenient for estimating the slope of the Reineke equation and for explaining the mechanism of its variation among species. The model should be also accepted as a generalized model of the stand density versus quadratic mean diameter relationship, whereas the original Reineke equation should be seen as a specific case of this model.     

Plywood frame corner joints with glued-in hardwood dowels

This paper presents research on plywood frame corners jointed to glulam beams and columns by means of glued-in hardwood dowels. The frame corner was made of a solid block of ordinary plywood of the same width as the glulam beams and with plies parallel to the plane of the frame to avoid splitting due to stress perpendicular to the grain. Hardwood dowels with a diameter of 12mm and a maximum glued-in length of 120mm were glued into drilled holes in the plywood corner and glulam beam ends parallel to the grain direction of the beams to form a momentresisting joint. Static bending tests were conducted of frame corners with 100 X 200mm² and 120 X 420mm² beam cross sections. Bending capacities of the joints corresponding to a modulus of rupture of the jointed glulam beams of about 30MPa were obtained for both closing and opening moments for the small cross sections, and about 22MPa was obtained for the large cross sections. Simple design models for calculation of joint strength and rotational stiffness are also presented.     

The effect of compression and incision on wood veneer and plywood physical and mechanical properties

ABSTRACT

Drying takes the largest share of energy in plywood production, and varying moisture content of veneers necessitates re-drying that often leads to over-dry veneers with deactivated surfaces, which may promote imperfect bonding. In order to decrease the drying time, reduce the need for re-drying of veneers, and improve the quality of plywood, birch and spruce veneers were subjected to pre-treatment by cold compression, incision, or a combination of the two. The effects of pre-treatment on the veneer and plywood quality were assessed by standard tests. Compression had a beneficial effect on water removal of the wettest veneers (spruce sapwood (SW) and birch), but some thickness reduction was observed in the veneers as well as the finished birch plywood. Compression led to thickness reduction of spruce veneers, but had no effect on SW plywood thickness likely due to higher viscoelasticity. Both compression and the combination of incising and compression levelled the moisture variation within the compressed stacks. Incision improved the modulus of elasticity of birch plywood, shear strength of SW plywood, and both bending and shear strengths of heartwood plywood. Higher surface pressure decreased the drying time of spruce SW in both plain compression and combined incision and compression pre-treatment.     

Tree size dependence of litter production, and above-ground net production in a young Hinoki (Chamaecyparis obtusa) stand

The study was carried out in a 9-year-old hinoki cypress (Chamaecyparis obtusa (Sieb. et Zucc.) Endl.), stand over a span of three years from July 1992 to June 1995, primarily to predict litter production from exteral tree dimensions by combining open-top clothtrap and clipping methods. Litter production was virtually concentrated in October and November. Stem cross-sectional area at the crown base was proved to be the reliable predictor of litter production, and that single regression model was evolved irrespective of year. The regression model had proportional constants of 2.696 × 10⁻² and 3.540 × 10⁻² kg cm⁻² year⁻¹ for leaf litter and total litter production, respectively. Utilizing the model, leaf litter production of the stand was assessed to be 5.04, 5.12, and 4.99, and total litter production to be 6.48, 6.58, and 6.40 Mg ha⁻¹ year⁻¹ for the first, second and third year, respectively. Biomass increment was 6.67, 7.80, and 7.70, tree mortality was 0.15, 0.13, and 0.41, and insect grazing was 0.09, 0.05, and 0.002 Mg ha⁻¹ year⁻¹ for the first, second and third year, respectively. Above-groud net production was therefore 13.39, 14.55, and 14.51, Mg ha⁻¹ year⁻¹, and biomass accumulation ratio (biomass/net production) was 1.86, 2.21, and 2.76 year for the first, second and third year, respectively. Considering data from earlier studies and the results of this study, biomass accumulation ratio,BAR (year), of hinoki stands was best related to above-ground biomass,y (Mg ha⁻¹), using the power function:BAR=0.112y ^0.936. Excluding seedling stands, leaf efficiency (above-ground net production per unit leaf mass) of hinoki stands was 0.91±0.02 (SE) Mg Mg⁻¹ year⁻¹, irrespective of stand biomass or age.