Synovial fluid total protein concentration as a possible marker for canine idiopathic polyarthritis

Idiopathic polyarthritis (IPA) is a very common inflammatory arthropathy in the dog. Canine IPA is diagnosed mainly by detecting increased number of leukocytes in the synovial fluid (SF), which is easily influenced by glucocorticoid therapy. We obtained 31 SF samples from 24 IPA dogs prior to (n=19) and/or after (n=12) 1 to 10 weeks of glucocorticoid therapy. The SF total protein concentrations of IPA dogs were significantly higher than those of dogs with non-arthritis diseases (n=34) and healthy controls (n=10). Our data revealed that the SF total protein concentrations are not influenced by several weeks of glucocorticoid therapy. Hence, the SF total protein concentration is applicable as a diagnostic marker of canine IPA even when the patients are receiving glucocorticoid therapy.     

Ligand-binding characteristics of feline insulin-binding immunoglobulin G

Polyclonal immunoglobulin (Ig) G autoantibodies against insulin have been identified in sera of healthy cats. We purified and fractionated insulin-binding IgGs from cat sera by affinity chromatography and analyzed affinity of insulin-binding IgGs for insulin and their epitopes. Following the passing of fraction A, which did not bind to insulin, insulin-binding IgGs were eluted into two fractions, B and C, by affinity chromatography using a column fixed with bovine insulin. Dissociation constant (KD) values between insulin-binding IgGs and insulin, determined by surface plasmon resonance analysis (Biacore™system), were 1.64e⁻⁴ M for fraction B (low affinity IgGs) and 2e⁻⁵ M for fraction C (high affinity IgGs). Epitope analysis was conducted using 16 peptide fragments synthesized in concord with the amino acid sequence of feline insulin by an enzyme-linked immunosorbent assay. Fractions B and C showed higher absorbance (affinity) of the peptide fragment of 10 amino acid residues at the carboxyl-terminal of the B chain (peptide No. 19), followed by peptide fragments of 6 to 15 amino acid residues of the B chain (peptide No. 8). Fraction C showed a higher absorbance to 7 to 16 amino acid residues of the B chain (peptide No. 5) compared with the absorbance of fraction B. Polyclonal insulin-binding IgGs may form a macromolecule complex with insulin through the multiple affinity sites of IgG molecules. Feline insulin-binding IgGs are multifocal and may be composed of multiple IgG components and insulin.     

Development of wooden portal frame structures with improved columns

In Japan, the lifetime cycle of most housing lasts around 20–30 years. A governing factor in this respect is poor durability due to old-fashioned use of the house. As a solution of this problem, houses can be built with a skeleton structure that allows free partition of spaces by future owners. To develop the skeleton structure effectively, multistory frames with spans of 6 to 10 m are required. For this reason, attention has been focused on the behavior of multistory timber frame structures. In this article, two types of wooden portal frame structures are proposed. Both structures have improved vertical columns with short horizontal members glued in. The aim of this study was to investigate structurally effective solutions with these types of columns. The first type of the new structure changed the location of the moment-transmitting ductile connection with the improved columns. The second type of structure used an extended panel zone. Nine portal frame specimens were tested. The stiffness values were improved by around 1.7 and 3.5 times when compared with the control, and the strength was improved by around 1.25 and 1.45 times.     

云杉胶合木钢板斜螺钉连接的剪切性能研究

为准确评价斜螺钉连接钢 木节点的剪切性能,探明其受力机理,以云杉胶合木、钢板和自攻螺钉作为研究材料,测试不同荷载方向与受力情况下斜螺钉连接节点的承载性能,将试验数据与国外规范中的计算模型进行对比,提高了侧边钢板 胶合木(钢 木)斜螺钉连接节点承载性能的预测能力。结果表明:自攻螺钉与剪切面之间的角度变化对其在钢 木节点承受剪 压复合应力的承载力影响不明显,当偏转为剪 拉复合应力时,节点承载力明显增大,并在30°~45°获得最大值;剪 压复合应力时,现行EC5公式计算剪 压节点的极限承载力非常不安全;EC5的刚度预测结果在剪 压复合应力区和垂直剪切面钉入时,与试验值吻合度很高,但对剪 拉区节点的滑移模量没有预测性;将Tomasi模型应用于斜螺钉连接钢 木节点滑移模量理论计算时,在45°~90°时与试验值吻合度极高。单颗自攻螺钉的抗拔刚度计算节点滑移模量的方法极为有效,具有较高的借鉴意义。     

Dynamic excitation and static loading tests of glulam lattice floor

A wooden lattice floor with high stiffness and damping capacity has been developed to solve noise problems in wooden apartment houses. The lattice floor consisted of Douglas fir glulam beams with inserted steel plate joints and drift pins. To examine the structural performance of the floor, dynamic excitation and static loading tests were conducted on the full size floor. The first and second order resonance frequencies of the floor were 13.5Hz and 27.0Hz, respectively. These frequencies are similar to the peak frequency of a conventional wooden floor and the combined floor fabricated from glued laminated timber and iron. The maximum static load of the floor was 127kN. The apparent flexural rigidity was less than half the value of several floors studied in the past. However, it is considered that the stiffness is improved by constructing panels and this floor has almost equivalent performance. Relative deflection was not affected by the loading history.Part of this study was presented at the International Wood Engineering Conference, New Orleans, October 1996.     

On mechanical behavior of traditional timber shear wall in Taiwan I: background and theory derivation

The objectives of this study were to explore the mechanical behavior of traditional timber shear walls in Taiwan and to propose a theoretical model to predict their lateral force resistance. An extensive field investigation was conducted, and the dimensions, tectonic detail, and materials used were recorded. The data collected were used as the reference for theoretical derivation and experimental design. In the theoretical model, the moment resistance of entire shear walls was derived from the contributions of the moment-resisting capacity supplied not only by embedment and friction action between board units and beams but also the dowel action of bamboo nails. Timber shear walls with various geometric conditions and material properties are considered. The theoretical model demonstrated in this study can be used to predict the mechanical behavior of timber shear walls and will be verified by experiments in our next article.     

Bearing properties of engineered wood products I: effects of dowel diameter and loading direction

The embedment tests of laminated veneer lumber (LVL) with two moduli of elasticity (MOE; 7.8 GPa and 9.8GPa), parallel strand lumber (PSL), and laminated strand lumber (LSL) were conducted in accordance with ASTM-D 5764. The load-embedment relation for each of these engineered wood products (EWPs) was established. The directional characteristics of bearing strength (_e), initial stiffness (k _e), and effective elastic foundation depth were obtained from the tested results. The effective elastic foundation depth (=E/k _e,E = MOE), based on the theory of a beam on elastic foundation, was obtained from thek _e and MOE. An of 90° (perpendicular to the grain) was calculated by dividingE ₉₀ [MOE of 90° from the compression test, but MOE of 0° (E ₀), parallel to the grain, obtained from the bending test] byk _e90, the initial stiffness of 90°. This study aimed to obtain the bearing characteristics of each EWP, taking into consideration their anisotropic structures, for estimating the fastening strength of a dowel-type fastener. The relations between the bearing coefficients ( _e,k _e,) on the loading direction and dowel diameter were established from the load-embedment curves. Based on the results of the embedment test, tested EWPs showed different tendencies in all directions from wood and glued laminated timber.Part of this study was presented at the 49th Annual Meeting of the Japan Wood Research Society, Tokyo, April 1999     

Estimation of stiffness and strength in timber knee joints with adhesive and verification by experiment

The use of adhesive joints is gradually increasing, especially those with glued-in steel rods (GIRs). There are, however, some problems with the design methods when used for moment-transmitting applications. In this article, design methods for GIRs and cross-lapped glued joints (CLJs) are proposed. For CLJs, we made a hypothesis that both rotational deformation of CLJ and stress of the glue line occurred with bending and shearing deformation of the timber. Using this hypothesis and Kelvin’s theorem, a mechanical model of CLJ is proposed. For GIRs, the axial stress component of the rod and the lateral stress component of the rod were taken into account using the theory of a beam on an elastic foundation. From the comparisons between calculations and experimental results, it was recognized that the stiffness and strength of CLJs and GIRs could be predicted precisely using our proposed models.     

Development of an in vitro culture system for producing eel larvae from immature ovarian follicles in Japanese eel <Emphasis Type="Italic">Anguilla japonica</Emphasis>

To standardize conditions during the final maturation and ovulation of ovarian follicles from Japanese eel, we have developed a culture system for the production of fertilizable eggs from post-vitellogenic ovarian follicles in vitro. Post-vitellogenic ovarian follicles were incubated in culture medium supplemented with 17α,20β-dihydroxy-4-pregnen-3-one (DHP) with or without bovine serum albumin (BSA) to assess the effects of protein concentration. Eggs that ovulated during incubation were fertilized, and the remaining follicles were incubated in prostaglandin F_2α (PGF_2α) for a further 3 or 6 h before fertilization. Male eels were injected repeatedly with human chorionic gonadotropin. The quality of eggs obtained under the different culture conditions was evaluated after artificial fertilization in terms of hatching success. Hatching rates tended to decrease with increasing concentrations of BSA in the incubation medium in a dose-dependent manner. The addition of PGF_2α drastically increased the number of eggs that ovulated, but the rate of hatching was greatly decreased compared with eggs obtained earlier by DHP incubation alone. The larvae obtained from artificially fertilized eggs produced in vitro survived for 14 days without feeding. We conclude that in vitro culture systems thus have a great potential for the acquisition of good quality eggs under tightly controlled artificial conditions, culminating in the production of eel larvae.     

Developmental changes in pituitary–thyroid axis, and formation of gonads in leptocephali and glass eels of Anguilla spp.

SUMMARY: Pituitary, thyroid gland and gonads in leptocephali of Japanese eel Anguilla japonica (19.8–32.6 mm in total length), A. obscura (45.0 mm), and A. bicolor pacifica (49.5 mm) and those in glass eels of the Japanese eel were histologically and immunohistochemically examined in order to observe the developmental changes of these endocrine organs in the Anguillidae. The pituitary, consisting of adenohypophysis and neurohypophysis in Japanese eel leptocephali over 22.5 mm, did not contain thyroid stimulating hormone (TSH) immunoreactive cells. Such cells were, however, detectable in the more developed pituitaries of leptocephali of A. obscura and A. bicolor pacifica and in those of glass eels. Conversely, thyroxine (T₄)-immunoreactive thyroid follicles could be detected in all specimens, both leptocephalic and glass eel. Only in glass eels, gonads were found in the body cavity, and these gonads harbored one or two primordial germ cells (PGC) per cross-section. Our results indicate that thyroid hormones (TH) production started prior to TSH production, and that TSH and TH are both secreted during the metamorphosis from leptocephalus to glass eel. Therefore, it is plausible that the TSH–TH axis is involved in the metamorphosis from leptocephalus to glass eel, but not in the early growth from preleptocephalus to leptocephalus.