Contact and fumigant activities of constituents of Foeniculum vulgare fruit against three coleopteran stored‐product insects

The insecticidal activities of materials derived from the fruit of fennel, Foeniculum vulgare, against adults of Sitophilus oryzae, Callosobruchus chinensis and Lasioderma serricorne were examined using direct contact application and fumigation methods. The biologically active constituents of the Foeniculum fruits were characterized as the phenylpropenes (E)‐anethole and estragole, and the monoterpene (+)‐fenchone, by spectroscopic analysis. Responses varied with insect species, compound, dose and exposure time. In a filter paper diffusion test, estragole at 0.168 mg cm^?2 caused 91% mortality to S oryzae adults within 1 day after treatment (DAT), whereas (+)‐fenchone and (E)‐anethole gave over 90% mortality at 2 and 4 DAT, respectively. Against C chinensis adults, all test compounds revealed potent insecticidal activities at 0.021 mg cm^?2 at 2 DAT. Against L serricorne adults at 0.105 mg cm^?2, (E)‐anethole gave 100% mortality at 1 DAT, whereas 90 and 60% mortality at 4 DAT was achieved with estragole and (+)‐fenchone, respectively. In a fumigation test, the test compounds were much more effective against adults of S oryzae, C chinensis and L serricorne in closed cups than in open ones, indicating that the insecticidal activity of test compounds was largely attributable to fumigant action. As naturally occurring insect‐control agents, the F vulgare fruit‐derived materials described could be useful for managing field populations of S oryzae, C chinensis and L serricorne. © 2001 Society of Chemical Industry     

Study on half-scale model test for light-frame shear wall

A half-scale model of a light-frame shear wall was developed to evaluate the racking performance of a fullscale shear wall (prototype). The effect of nail size on the performance of the shear wall was also investigated using models constructed with three types of nail. Materials for the model were determined through experimental methods, which included nail-head push-through, stud-to-sheathing nail connection, and static bending tests. Materials with which the model was made to be in similarity to the prototype were three-layer 4.8-mm plywood, 39.72-mm long nails, and 1 × 2 lumber cut from 2 × 4 studs. In accordance with ASTM E 72 and ASTM E 564, racking resistance tests were conducted on 20 shear walls. The results showed that the maximum load capacities of the prototype walls could be evaluated by the model without significantly different failure modes. Tests on the effect of nail size revealed that increasing the nail head diameter may improve the performance of shear walls.Parts of this paper were presented at the International Conference on Effective Utilization of Plantation Timber (ICEUPT'99), Chi-Tou, Taiwan, May 1999; and the World Conference on Timber Engineering (WCTE2000), Whistler, Canada, July–August 2000     

Comparison of arylalkylamine N-acetyltransferase and melatonin receptor type 1B immunoreactivity between young adult and aged canine spinal cord

Melatonin affects diverse physiological functions through its receptor and plays an important role in the central nervous system. In the present study, we compared immunoreactivity patterns of arylalkylamine N-acetyltransferase (AANAT), an enzyme essential for melatonin synthesis, and melatonin receptor type 1B (MT2) in the spinal cord of young adult (2~3 years) and aged (10~12 years) beagle dogs using immunohistochemistry and Western blotting. AANAT-specific immunoreactivity was observed in the nuclei of spinal neurons, and was significantly increased in aged dog spinal neurons compared to young adult spinal neurons. MT2-specific immunoreactivity was found in the cytoplasm of spinal neurons, and was predominantly increased in the margin of the neuron cytoplasm in aged spinal cord compared to that in the young adult dogs. These increased levels of AANAT and MT2 immunoreactivity in aged spinal cord might be a feature of normal aging and associated with a feedback mechanism that compensates for decreased production of melatonin during aging.     

Characterization of the DNA nucleotide sequences in the genome of red sea bream iridoviruses isolated in Korea

The nucleotide sequences of DNA fragments amplified by polymerase chain reaction (PCR) from four different genomic regions of nine red sea bream iridoviruses (RSIVs) isolated from different species of fish, different areas and in different years in Korea were compared with the reported reference sequences. One isolate, RSIV Namhae, showed 100% homology to the reference sequences, while the other eight isolates, which appeared to contain identical nucleotide sequences, showed 96.6–98.9% homology with reference sequences depending upon the target regions of PCR gene amplification. However, differences in nucleotide sequences were not apparent between the RSIVs isolated in different locations, in different years or in different host species. We also cloned and sequenced the 3′ end flanking region (K1) of the DNA polymerase (DPOL) gene using the cassette ligation-mediated PCR method. This sequence was 4436-bp long and possessed two open reading frames (ORF-1 and ORF-2) oriented in opposite directions. The putative proteins encoded by these two ORFs could not be characterized by comparison with the proteins of other species in the data banks. The presence of the ribonucleotide reductase small subunit (RNRS) gene at the 3′ end of the K1 region allowed us to determine that these two genes, RNRS and DPOL, are separated 5508 bp and oriented in the same direction in the genome of RSIV. Moreover, it is of interest that a PstI-restriction fragment, of which the sequence but not the location within the RSIV genome had previously been reported, is located at nucleotide positions from 1096 to 2054, extending from within the ORF-1 region, spanning the intervening sequence between ORF-1 and ORF-2, and extending into the ORF-2 region. Various repeating sequences up to 86 bp were present at the 3′ ends of ORFs, especially within the nucleotide sequences at the 3′ terminus of ORF-2. No similarities were detected when the DNA sequences of the K1 region were compared to the DNA sequences of a repetitive element in the genome of other iridoviruses.     

Synthesis and properties of Nylon 4/5 copolymers for hydrophilic fibers

Nylon 4, which can be synthesized by anionic ring-opening polymerization, has good mechanical properties and a very high affinity for water owing to its high polarity. On the other hand, despite its high melting temperature, the polymer has not been commercialized because of its low thermal stability. In this study, copolymerization of 2-pyrrolidone (C4) with 2-piperidone (C5) was performed to reduce the melting temperature of Nylon 4 homopolymer. The copolymerization reaction was controlled by changing the comonomer content, catalyst content, temperature, initiator content, and reaction time. The Nylon copolymers were characterized by ¹H-nuclear magnetic resonance (NMR) spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The hydrophilic properties of Nylon 4 and its copolymers were evaluated by surface free energy analysis and moisture regain measurement. The intrinsic viscosity and polymerization yield of Nylon 4 increased with increasing catalyst concentration until 5 mole% and decreased with further increases in catalyst loading. The proton NMR spectrum revealed the composition of the Nylon 4/5 copolymer to be 62.5 % C4 moiety at a 5:5 comonomer feed ratio. The melting temperature of the Nylon 4/5 copolymers decreased considerably according to the composition. The moisture regain of the Nylon 4/5 copolymer was higher than 6.4 % even at 77.3 % C4 in composition.     

Selection of Tolerant Plants and Their Arrangement to Restore a Forest Ecosystem Damaged by Air Pollution

Plants tolerant to polluted environments were selected, based on several criteria, to restore a coastal forest ecosystem severely damaged by air pollutants discharged from an industrial complex. In addition, a restoration plan was prepared synthesizing these results and the diagnostic ecological indicators in the area for which restoration is required. Pollution-tolerant plants of 11 tree and subtree species, 10 herb species and one shrub species were selected from field surveys in the vicinity of two representative industrial complexes in Korea, Ulsan and Yeocheon. Nine species were selected for tolerance to SO₂ fumigation and six species were selected for tolerance to Al³⁺. Growth and photosynthetic responses of sample plants transplanted into polluted and unpolluted sites showed that 15 species out of the 26 sample plants showed a disposition for tolerance. Most of these are endemic plants and they are composed of diverse species in structure and function. This result implies that these tolerant species could play important roles in the restoration of the study area, which has several specific features. On the other hand, results from transplant tests indicate that a field survey is the most reasonable method for selection of tolerant plants to restore a pollution-damaged ecosystem, as was shown in another restoration program. Results of ecological analysis on vegetation map indicate that the spatial range within the first ridge is the sector for which restoration is required. This sector was classified into four zones on the basis of topographic conditions: lower and upper slopes of both slopes facing and opposite the pollution source. Guidelines for soil amelioration and arrangement of tolerant plants were prepared considering the degree of vegetation degradation, leaf damage of major plant species and soil pollution in each zone under the restoration plan.     

Measurement of Atmospheric Formaldehyde and Monoaromatic Hydrocarbons using Differential Optical Absorption Spectroscopy during Winter and Summer Intensive Periods in Seoul, Korea

Ozone effects on Mediterranean forests were studied for 10 years in southern France. The aim of these studies was to understand the impact of the pollutant on foliar damage among Aleppo pine (Pinus halepensis Mill) and Arolla pine (Pinus cembra L) populations. During the summers of 2001 and 2002, ozone concentrations were measured using UV absorption analysers (4) and passive samplers (29) at two forest monitoring sites: Site 1 in the Nice coastal area for Aleppo pine and Site 2 in the Mercantour mountains for Arolla pine, in the vicinity of tree observation sites. AOT 40 values were quite high (25–33 ppm.h), especially in the Mercantour mountains, for the 5 months of measurement. Foliar damage (defoliation and discoloration) and specific symptoms (chlorotic mottle) were observed on 8 Aleppo pine and 13 Arolla pine plots. For Arolla pines, there was a significant correlation between defoliation and chlorotic mottles. There was also a correlation between mean ozone concentrations measured by passive samplers and chlorotic mottles. These correlations were less significant for Aleppo pine.