Changes in wettability of wood surface using electron beam irradiation

ABSTRACT

This study deals with the influence of electron beam irradiation (EBI) on the wettability of Norway spruce surface samples. To evaluate this possible effect in detail, the changes in chemistry and wood structure were analysed using the methods of IR spectroscopy and Scanning Electron Microscopy (SEM). The surface wettability was determined by the contact angle measurement method. The results of infrared spectra show decreased relative numbers of available hydrophilic groups (e.g. hydroxyl and carbonyl groups) in the wood surfaces due to the electron beam irradiation. This behaviour is consistent with the values from the surface wettability measurements. Structural differences of the wood surfaces after electron beam irradiation were not detectable. Based on these findings pre-treatment of wood surfaces for industrial usages can be a potential field of application of this technology.     

Ripening reduces the shrinkage of processed dredged material

Purpose

The utilization of dredged material in dike construction as a substitute for traditionally used materials is considered as an option to preserve natural resources such as marsh sediments. As a prerequisite for this application, the equivalency with respect to soil physical and mechanical properties of the materials must be assessed. Previous investigations have shown pronounced differences in shrinkage behavior and desiccation cracking between sediments and dredged material. The key objective of the study was to assess whether shrinkage of processed dredged material can be reduced by further processing, i.e., dewatering, which can be referred to as ripening.

Materials and methods

To compare the shrinkage behavior of the materials, three different methods of different scales were applied. Small-scale methods conducted were the standard procedure for the determination of the shrinkage limit and the determination of the coefficient of linear extensibility (COLE_rod). Large-scale shrink-swell experiments were carried out in a specially constructed test system with 90 l capacity for a period of up to 385 days. Here the materials were ripened, i.e., air-dried, until shrinkage almost ceased, and a rewetting-air-drying cycle was conducted. Shrinkage and swelling were determined during the processes by measuring the changes in volume. On the ripened materials, COLE_rod was determined.

Results and discussion

The experiments show that the shrinkage behavior of processed dredged material can be ameliorated by ripening. COLE_rod of the ripened materials were about 20–80% lower than COLE_rod of the un-ripened materials. The large-scale shrink-swell experiments showed that shrinkage in the second drying cycle amounted to less volume than in the first drying cycle and that shrinkage behavior in contrast to the first drying cycle, where pronounced proportional shrinkage was observed, was dominated by structural and residual shrinkage in this cycle.

Conclusions

Ripening of processed dredged material is considered a useful pre-treatment option to ameliorate the shrink-swell behavior of processed dredged material and to obtain a better functional equivalency with traditionally used dike construction materials such as fine-grained marsh sediments.

     

Early and late root formation in epicotyl cuttings of Pinus sylvestris after auxin treatment

Auxin stimulated rooting of epicotyl cuttings of Pinus sylvestris irrespective of the physiological stage of the plant from which the cuttings were taken. The epicotyl cuttings were divided into two groups, those that differentiated roots early (within 6 weeks after cutting) and those that differentiated roots late (more than 6 weeks after cutting). Auxin treatment significantly stimulated the frequency of early rooting of epicotyl cuttings, whereas it had no effect on the frequency of late rooting of epicotyl cuttings. The number of roots per rooted cutting was significantly higher after auxin treatment both on early and late rooted cuttings. Anatomical studies showed that most of the roots on both early and late rooted cuttings developed from wound tissue. However some types of rooting were found only after auxin treatment of early rooted cuttings, e.g., roots that developed from resin duct wound tissue or from vascular tissue or in the pith.     

Aus der Vorratsschutz-Arbeit des Pflanzenschutzamtes Berlin. Tierische Schädlinge in Nahrungs- und Genußmitteln der Großlagerhaltung und Bekämpfungsmaßnahmen in den Jahren 1980–1986

Zusammenfassung Es wird über das Auftreten von 25 Vorratsschädlingen, darunter 17 Käfer- und 3 Mottenarten, in den Lägern der Bevorratungsabteilung des Senators für Wirtschaft und Arbeit, der sonstigen Großlagerhaltung sowie in den Vorräten privater Haushalte berichtet. Die häufigsten Schädlinge in der Großlagerei waren Brotkäfer (Stegobium paniceum L.) und Speichermotten (Ephestia elutella Hbn.). Für den Vorratsschutz interessante Fälle und besondere Arten werden ausführlicher behandelt. Außerdem wird ein Überblick über die Entwesungs- und Entseuchungsarbeiten gegeben, bei denen neben den Begasungsmitteln mit den Wirkstoffen Methylbromid, Phosphorwasserstoff und Blausäure auch Vorratsschutzmittel auf der Grundlage von Dichlorvos, Pyrethrum und Piperonylbutoxid in verschiedenen Anteilen eingesetzt werden.

---

Stored products protection activities of the Plant Protection Office Berlin. Pests of foodstuffs and pest-control in warehouses from 1980 to 1986

It is reported about the appearance of 25 stored-product pests, within 17 species of beetles and 2 species of moths in warehouses of the Bevorratungsabteilung des Senators für Wirtschaft und Arbeit as well as in the other warehouses and private households. The drugstore bettle (Stegobium paniceum L.) and the warehouse moth (Ephestia elutella Hbn.) were the most common pests. Cases of special interest and particular species are described in detail. Also is given a survey about the pest-controlling measures carried out with poisongas as methylbromide, phosphine and hydrocyanic acid and with insecticides on basis of dichlorvos, pyrethrum and piperonylbutoxide.

---

---

Mit einer Abbildung und 3 Tabellen     

Customer adapted grading of Scots pine sawn timber using a multivariate method

To define new grading rules, or to customize the ones in use in a rule-based automatic grading (RBAG) system of boards, is a time-consuming job for a sawmill engineer. This has the effect that changes are rarely made. The objective of this study was to continue the development of a method that replaces the calibration of grading rule settings by a holistic-subjective automatic grading, using multivariate models. The objective was also to investigate if this approach can improve sawmill profitability and at the same time have a satisfied customer. For the study, 323 Scots pine (Pinus sylvestris L.) boards were manually graded according to the preferences of an important customer. That is, a customer that regularly purchases significant volumes of sawn timber. This manual grading was seen as reference grading in this work. The same boards were also scanned and graded by a RBAG system, calibrated for the same customer. Multivariate models for prediction of board grade based on aggregated knot variables, obtained from the scanning, were calibrated using partial least squares regression. The results show that prediction of board grades by the multivariate models were more correct, with respect to the manual grading, than the grading by the RBAG system. The prediction of board grades based on multivariate models resulted in 76–87% of the boards graded correctly, according to the manual grading, while the corresponding number was 63% for the RBAG system.     

Do boating and basking mix? The effect of basking disturbances by motorboats on the body temperature and energy budget of the northern map turtle

1. Basking is the primary mechanism used by many freshwater turtles to maintain their body temperature (T_b) in a range that maximizes physiological performance. Basking turtles are easily disturbed by motorboats, but the consequences of the increasingly popular use of motorboats on turtles is largely unknown.
2. In this work, predictive models built from field and laboratory data were used to assess the effects of the frequency of basking disturbance by motorboats on T_b and metabolic rate (MR) of female northern map turtles (Graptemys geographica), a species of conservation concern.
3. Simulations revealed that the effects of boat disturbance vary seasonally. In early May, a conservative estimate of the disturbance rate (0.15 per hour) resulted in a 0.34°C decrease in mean daily T_b, which translated to a 7.8% reduction in mean MR. In June, July and August, owing to warmer lake temperatures, the effect of disturbance was less marked and the observed disturbance rates (0.32, 0.96 and 1.23 per hour, respectively) reduced the mean MR of an adult female by 2.1%, 0.5%, and 0.4 %, respectively.
4. Reduction in MR decreases the rate of energy assimilation, which could translate into sublethal effects on turtles, such as reduced growth and reproductive output.
5. Motorboat usage is increasing in many areas and is probably affecting other species of freshwater turtles that use aerial basking. This study offers important insights on the implications of disturbances for species that bask.

Copyright © 2016 John Wiley & Sons, Ltd.     

Phytophthora urerae sp. nov., a new clade 1c relative of the Irish famine pathogen Phytophthora infestans from South America

An unknown Phytophthora species was discovered in the central Peruvian Andes on blighted foliage of the native South American plant species Urera lacineata. Urera is a genus of native flowering shrubs in the nettle family Urticaceae. This new taxon Phytophthora urerae sp. nov. is herewith formally described based on extensive morphological analysis, phylogenetic analysis of nuclear and mitochondrial loci, and AFLP analysis. Phytophthora urerae sp. nov. is a close relative of the Irish famine pathogen, Phytophthora infestans, and only the third clade 1c taxon described from South America to date. In contrast to the clade 1c taxon Phytophthora andina, first described in South America as a hybrid, P. urerae does not appear to be a hybrid based on cloning and sequencing nuclear loci. Findings of new species in South America may provide novel insights into the origin and evolutionary history of clade 1c Phytophthora species.     

The relative importance of dispersal limitation and habitat preference in shaping spatial distribution of saplings in a tropical moist forest: a case study along a combination of hydromorphic and canopy disturbance gradients

• Introduction   

Various processes contribute to shaping the local assemblage of species in hyperdiverse tropical forest. The relative contribution of environmental factors and dispersal limitation in determining the spatial distribution of saplings at local scale is unclear.     

Cryptic speciation in Hymenoscyphus albidus

Ash dieback caused by the mitosporic ascomycete Chalara fraxinea is a novel disease of major concern affecting Fraxinus excelsior and Fraxinus angustifolia in large parts of Europe. Recently, its teleomorph was detected and assigned to Hymenoscyphus albidus, which has been known from Europe since 1851. In this study, we present molecular evidence for the existence of two morphologically very similar taxa, H. albidus, which is lectotypified and Hymenoscyphus pseudoalbidus sp. nov. Differences were found between the species in the loci calmodulin, translation elongation factor 1‐α and the internal transcribed spacers of the rDNA genes, and strong differentiation was obtained with ISSR markers. It is likely that H. albidus is a non‐pathogenic species, whereas H. pseudoalbidus is a virulent species causing ash dieback. Genotyping herbarium specimens showed that H. pseudoalbidus has been present in Switzerland for at least 30 years prior to the outbreak of the epidemic.     

Larval performances and life cycle completion of the Siberian moth, <Emphasis Type="Italic">Dendrolimus sibiricus</Emphasis> (Lepidoptera: Lasiocampidae), on potential host plants in Europe: a laboratory study on potted trees

The Siberian moth, Dendrolimus sibiricus, Tschtv. is the most harmful defoliator of coniferous forests in North Asia. The pest has already spread over the Urals and continues moving westwards. Recently, it has been recommended for quarantine in member countries by European and Mediterranean Plant Protection Organization (EPPO). The performances of the pest on coniferous species planted in Europe were assessed on a range of potted trees corresponding to the spectrum of economically important conifers in the EU: European larch Larix decidua, Norway spruce Picea abies, Scots pine Pinus sylvestris, European black pine Pinus nigra, and the North American species: Douglas fir Pseudotsuga menziesii and grand fir Abies grandis. Larvae showed a potential to survive and complete the development on all these host tree species. Favorable hosts were grand fir, European larch, and Douglas fir that allowed higher survival, better larval development, and as a result, yielded heavier pupae and adult moths with higher longevity. Black pine was a poor host but, however, could still support larval and pupal development. Norway spruce and Scots pine had an intermediate behavior. If accidentally introduced to Europe, the Siberian moth may become especially damaging in forest stands predominated by European larch and by the North American firs. Norway spruce and especially the two-needle pines will be less prone to intensive defoliation by this species. The fact that the pest may damage the range of economically important coniferous species should be taken into account in the pest risk assessment for Europe and also for North America where the Siberian moth occurrence is considered likely.