Divisive field-scale associations between corn yields, management, and soil information

For corn crops on soils with fine texture in eastern Canada, research has been ongoing on the relationships between corn grain yields and management practice, soil strength/compaction, and soil nutrient status. However, these variables can operate in a complex manner that may not be detectable via uni-structural models. This study used regression-tree analysis, in an exploratory context, to model corn grain yields over a relatively flat clay to silty loam field on the basis of several soil physical, soil nitrate, and management variables. It was found that corn grain yields were first subdivided by length of time under corn production (1st and 3rd year corn groups). These yield groups were further subdivided by cone penetration resistance, elevation, soil nitrate, and soil texture information. Generally, higher corn grain yields were associated with 1st year corn, lower relative soil strength/compaction, and higher post-growing season soil nitrate levels. The modeled results helped to identify equifinality, context dependent relationships, and spatial continuity in inferred formative mechanisms; issues important in many field and/or landscape studies of spatial processes.     

The release of a troop of rehabilitated vervet monkeys (Chlorocebus aethiops) in KwaZulu-Natal, South Africa: outcomes and assessment

Rehabilitation and release have become central to the management and welfare of primate species in South Africa such as the vervet monkey (Chlorocebus aethiops). However, limited research means that it is unknown whether rehabilitation is a successful management strategy for this species. This study describes the release of a troop of rehabilitated vervet monkeys and evaluates the results of 1 year of post-release monitoring. The released animals exhibited wild behaviours and established a home range. Survival could not be adequately evaluated due to the high number of untraceable animals, and troop composition was significantly different from that of wild troops. Improvement may be gained by radio-collaring more animals using improved technology, ensuring that troop composition is comparable to wild troops, excluding ex-pets from re-introduction and a more detailed assessment of the release site.     

Measurements of Mouldboard Plow Draft: I. Spectrum Analysis and Filtering

Measurements of mouldboard plow draft can potentially provide a useful tool for continuously mapping, as a surrogate variable, crop limiting soil properties such as soil strength/compaction. Numerous researchers have shown that loading on tillage tools can be periodic. One source of higher frequency periodic loading has been related to failure modes in the soil. Lower frequency periodic loading on tillage tools, assuming tillage depth is relatively constant, more often reflects local spatial variability in soil physical properties such as soil moisture, soil texture, organic matter, and/or soil strength/compaction. This study presents a spectrum and cross-spectrum analysis of mouldboard draft recorded during normal fall plowing operations along adjacent transects. One objective of this study was to determine the dominant periodic components in order to elucidate meaningful frequencies which might be better related to variation in soil physical properties. Spectral densities were generally dominated by signals with a few cycles per 300-m transect. The cross-amplitude and squared coherency between draft recorded on adjacent transects provided further indication of the frequencies which characterized the signals because they provide an indication of correlation as a function of frequency. Spatial dependence in the data was quantified using spatial autocorrelation and cross-correlation. An additional objective was to use the spectral information to help design more physically meaningful filters for the raw draft data. Taking the Fast Fourier Transform of the raw draft data and filtering in the frequency domain using an optimal filter informed via the spectrum and cross-spectrum analysis, provided a convenient method for isolating a more physically meaningful signal.     

Measurements of Mouldboard Plow Draft: II. Draft-Soil-Crop and Yield-Draft Associations

The primary objective of this investigation was to evaluate some potential causal associations between draft derived from a 3-bottom mouldboard plow during normal fall field operations and soil-crop properties at a field site near Winchester, Ontario, Canada. A secondary objective was to investigate, in a preliminary manner, associations between draft and crop yield (corn, soybean, and wheat). Regression tree analysis indicated that draft variability was best explained by field location, crop type, soil cone penetration resistance in the plow layer, and soil texture in the plow layer. Draft was found to generally increase with cone penetration resistance in the plow layer and soil clay content. Corn yields were negatively associated with draft. The reverse was true for the soybean yields, and a combination of negative and positive draft vs. yield relationships existed for the wheat plots. The overall results indicated that draft data collected during normal field operations can be useful for producers interested in identifying areas in the field where soil strength/compaction might be problematic with regard to crop yields.     

Least limiting water range indicators of soil quality and corn production, eastern Ontario, Canada

The least limiting water range (LLWR) attempts to incorporate crop-limiting values of soil strength, aeration, and water supply to plant roots into one effective parameter (on the basis of soil water content). The LLWR can be a useful indicator of soil quality and soil physical constraints on crop production. This study focused on assessing dynamic cultivation zone LLWR parameters between different cropping/tillage/trafficked clay loam plots at Winchester, Ont., to identify potential management impact on surficial soil physical conditions for contrasting growing seasons. This study also evaluated dynamic cultivation layer LLWR variables as indicators of corn (Zea mays L.) plant establishment and corn yield. The results suggest that no-till soils had lower average air-filled porosities (AFP) and O₂ concentrations than respectively managed tilled plots for both years of study. Potential trafficking effects on aeration properties were most evident in no-till relative to till; preferentially trafficked no-tilled plots had lower AFP and O₂ concentrations than respective non-preferentially trafficked no-till plots for both years of study. Corn establishment and yield variability were principally explained by cumulative differences between daily AFP and aeration threshold values, and the cumulative number of days daily AFP was below an AFP aeration threshold for specific corn growth stage periods. Lower AFP was linked to lower yields and plant establishments. Soil strength, as measured by cone penetration resistance, was important over certain sites, but not as important globally as AFP in predicting crop properties. Overall, conventional tilled soils that were not preferentially trafficked had most favorable aeration properties, and subsequently, greatest corn populations and yields. No-till soils were at greater risk of aeration limiting conditions, especially those in continuous corn and preferentially trafficked.     

Slurry-application implement tine modification of soil hydraulic properties under different soil water content conditions for silt–clay loam soils

Tillage action associated with liquid slurry application systems/management practices can modify soil infiltration properties. The degree or nature of such modification will depend largely on the type of tillage implement used, and the soil conditions at time of tillage activity. The specific objective of this study is to evaluate differences in soil infiltration properties, as measured using pressure infiltrometers and Guelph permeameters, resulting from the immediate tine action of two commonly used slurry application tillage implements (Kongskilde Vibro-Flex (S-tine) and the AerWay SSD (rolling aerator-type tine)) over a variety of silt–clay loam soil water content conditions. The results indicated that there were consistent negative correlations between field saturated hydraulic conductivity and soil water content for all tine-disturbed and undisturbed soil treatments. For Kongskilde, field-saturated hydraulic conductivity was, on average, lower in tine-influenced furrow bottoms, relative to those measured in undisturbed conditions at similar depths for most water content conditions. Generally, the Kongskilde tine-action reduced macropore-based infiltration in the bottom of the furrow for most soil conditions, albeit, this effect was most pronounced at the higher soil water contents. For AerWay, the tine-disturbed soils had generally higher field saturated hydraulic conductivities than undisturbed soil treatments over the observed water content range. This effect was manifested to a greater degree at higher, relative to lower observed water contents.     

Changes in soil physical properties with depth in a conventionally tilled soil after no-tillage

A no-tillage system was imposed on a structurally degraded fine-textured soil (Humic Gleysol) that had been under continuous corn with moldboard tillage for more than 20 years. After 3 years of no-tillage, several soil structural properties were compared with the conventional tillage treatment to assess whether the soil structure had improved.

No significant difference (P<0.05) was found between tillage treatments for the saturated hydraulic conductivity, porosity and penetration resistance in the surface 5 cm. Measurements of soil penetration resistance and in situ saturated hydraulic conductivity (K_wp) using the well permeameter method were sensitive to structural changes that had occurred at 5–20 cm depth. The K_wp at this depth was significantly greater in the moldboard treatment than in the no-tillage treatment. Resistance measurements indicated significantly greater soil strengths at 10–20 cm under no-tillage. Aggregate stabilities were assessed by wet sieving twice during the growing season. No-tillage resulted in larger soil aggregates, especially at the surface, compared with the moldboard tillage.

These data suggest that degraded soils with low structural stability may initially suffer further deterioration with the elimination of tillage, owing to the loss or reduction of mechanically formed pores.