An Electrothermochromic Fabric Prepared by Electrodeposition of Polypyrrole on Single Side

An electrothermochromic fabric triggered by electric voltages was prepared by combining the electric heating feature of conductive polypyrrole (PPy) and the temperature-response color-changing feature of thermochromic inks. PPy was deposited selectively on the carbon-coated side of the sailcloth fabric via electrochemical polymerization. Thermochromic inks were painted on the reverse side with white color. The obtained fabric could be heated to about 48 °C and change its color significantly under an applied voltage of 3 V.     

Physiological response,blood chemistry profile and mucus secretion of red sea bream (<Emphasis Type="Italic">Pagrus major</Emphasis>) fed diets supplemented with <Emphasis Type="Italic">Lactobacillus rhamnosus</Emphasis> under low salinity stress

Environmental stressors caused by inadequate aquaculture management strategies suppress the immune response of fish and make them more susceptible to diseases. Therefore, efforts have been made to relieve stress in fish by using various functional feed additives in the diet, including probiotics. The present work evaluates the effects of Lactobacillus rhamnosus (LR) on physiological stress response, blood chemistry and mucus secretion of red sea bream (Pagrus major) under low salinity stress. Fish were fed four diets supplemented with LR at [0 (LR0), 1 × 10² (LR1), 1 × 10⁴ (LR2) and 1 × 10⁶ (LR3) cells g^?1] for 56 days. Before stress, blood cortisol, urea nitrogen (BUN) and total bilirubin (T-BIL) showed no significant difference (P > 0.05), whereas plasma glucose and triglyceride (TG) of fish-fed LR2 and LR3 diets were significantly lower (P < 0.05) than those of the other groups. Plasma total cholesterol (T-CHO) of fish-fed LR3 diet was significantly (P < 0.05) lower than that of the other groups. Furthermore, total plasma protein, mucus myeloperoxidase activity and the amount of mucus secretion were significantly enhanced in LR-supplemented groups when compared with the control group (P < 0.05). After the application of the low salinity stress test, plasma cortisol, glucose, T-CHO and TG contents in all groups showed an increased trend significantly (P < 0.01) compared to the fish before the stress challenge. However, plasma total protein and the amount of secreted mucus showed a decreased trend in all groups. On the other hand, BUN, T-BIL and mucus myeloperoxidase activity showed no significant difference after exposure to the low salinity stress (P > 0.05). In addition, the fish that received LR-supplemented diets showed significantly higher tolerance against low salinity stress than the fish-fed LR-free diet (P < 0.05). The physiological status and the detected immune responses, including total plasma protein and mucus myeloperoxidase activity in red sea bream, will provide a more comprehensive outlook of the effects of probiotics to relieve stress in fish.     

Nitrogen Fertilizer Management Practices to Reduce N<Subscript>2</Subscript>O Emissions from Irrigated Processing Potato in Manitoba

Nitrogen fertilizer practices affect nitrous oxide (N₂O) emissions from agricultural soils. The “4R” nutrient stewardship framework of using N fertilizer at the right rate, right source, right placement and right time can reduce N₂O emissions while maintaining or improving yield of field crops, but understanding of how the various factors affect N₂O emissions from irrigated processing potato is lacking. We examined the effects of selected 4R practices on emissions, using results from two irrigated processing potato studies each conducted in 2011 and 2012 in Manitoba, Canada. Experiment 1 examined combinations of source (urea, ESN), placement (pre-plant incorporation [PPI], banding), and rate (100 and 200 kg N ha^-1) on a clay loam soil. Experiment 2 examined timing and source treatment combinations (urea PPI, ESN PPI, urea split, urea split/fertigation) on a loamy fine sandy soil. For Experiment 1, use of ESN at 200 kg ha^-1 did not reduce area-, yield- and applied fertilizer N- based N₂O emissions compared to urea at 200 kg ha^-1, irrespective of placement. Emissions from pre-plant banding ESN at 200 kg ha^?1, however, were 32% lower than from PPI ESN. For Experiment 2, compared to single pre-plant urea application, fertigation simulated by in-season application of urea ammonium nitrate (UAN) gave lower area-, yield- and applied fertilizer N- based emissions. Split urea ( \( \raisebox{1ex}{$2$}\!\left/ \!\raisebox{-1ex}{$3$}\right. \) pre-plant, \( \raisebox{1ex}{$1$}\!\left/ \!\raisebox{-1ex}{$3$}\right. \) hilling) also reduced area- and yield- based N₂O emissions compared to single pre-plant urea application. Emissions were generally lower at the site with loamy fine sandy soil than the site with clay loam soil. These results demonstrate that combinations of “4R” practices rather than source alone are best to achieve reductions in N₂O emissions from irrigated potato production.     

Properties of polymers as a nanoscale material for fibers in leather

Hyperbranched polymers, an innovative class of nano-polymers, could enhance the properties of fibers owning to their unique structures. In this study, the ester compound (HPAE) of 3-(bis(2-hydroxyethyl)amino)propionic acid and pentaerythritol was treated with undecylenic acid to obtain novel hyperbranched multiterminal alkenyl polymers (HPAE-UAs). The sizes of the HPAE-UAs could be controlled conveniently from 400 to 1300 nm by adjusting the capped fraction of the hydroxyl groups with undecylenic acids. The molecular structures of HPAE-UAs were characterized by means of FT-IR and ¹H-NMR. Then, the effect of the HPAE-UAs on the structures, thermal, and mechanical properties of the wet blue leather were investigated. TEM and SEM demonstrated that the spacing between fibers was enlarged. The thermogravimetric analysis showed that the residual volume of leather could reach up to 30.3 % at about 500 °C. Furthermore, the shrinkage temperature increased to 89.4 °C. It was found that the HPAE-UAs used in leather could improve the thermal performance, physical and mechanical properties. All of these results indicate that HPAE-UAs can be used as a fatliquor with retanning in leather process.     

Investigation of the Potential Health Benefits as Lipase Inhibitor and Antioxidant of <Emphasis Type="Italic">Leopoldia comosa</Emphasis> (L.) Parl.: Variability of Chemical Composition of Wild and Cultivated Bulbs

There is a great interest in the nutritional value of vegetables and fruits and how the habitat affects nutritive and biological properties. In vitro studies here reported were performed to evaluate the inhibitory activity of formulations from edible plant on pancreatic lipase. The aim of this study was also to evaluate the biovariability of L. comosa (L.) Parl. bulbs from Italy. The wild bulbs were compared with the same cultivated species that are commonly commercialized to identify samples with the best quality for a potential therapeutic application. Hydroalcoholic extract and polar fraction of wild bulbs showed a very important pancreatic lipase inhibitory activity, with IC₅₀ values of 0.166 ± 0.005 and 0.153 ± 0.005 mg/mL, respectively. In order to characterize the extracts, gas chromatography associated with mass spectrometry (GC/MS) analysis was performed, revealing the predominance of palmitic acid. Phenolic and flavonoid composition was also evaluated. L. comosa extract obtained from wild bulbs demonstrated both antioxidant and anti-obesity activities that might be attributed to a wide range of present phenolic compounds.     

<Emphasis Type="Italic">Lupinus albus</Emphasis> Conglutin Gamma Modifies the Gene Expressions of Enzymes Involved in Glucose Hepatic Production <Emphasis Type="Italic">In Vivo</Emphasis>

Lupinus albus seeds contain conglutin gamma (Cγ) protein, which exerts a hypoglycemic effect and positively modifies proteins involved in glucose homeostasis. Cγ could potentially be used to manage patients with impaired glucose metabolism, but there remains a need to evaluate its effects on hepatic glucose production. The present study aimed to analyze G6pc, Fbp1, and Pck1 gene expressions in two experimental animal models of impaired glucose metabolism. We also evaluated hepatic and renal tissue integrity following Cγ treatment. To generate an insulin resistance model, male Wistar rats were provided 30% sucrose solution ad libitum for 20 weeks. To generate a type 2 diabetes model (STZ), five-day-old rats were intraperitoneally injected with streptozotocin (150 mg/kg). Each animal model was randomized into three subgroups that received the following oral treatments daily for one week: 0.9% w/v NaCl (vehicle; IR-Ctrl and STZ-Ctrl); metformin 300 mg/kg (IR-Met and STZ-Met); and Cγ 150 mg/kg (IR-Cγ and STZ-Cγ). Biochemical parameters were assessed pre- and post-treatment using colorimetric or enzymatic methods. We also performed histological analysis of hepatic and renal tissue. G6pc, Fbp1, and Pck1 gene expressions were quantified using real-time PCR. No histological changes were observed in any group. Post-treatment G6pc gene expression was decreased in the IR-Cγ and STZ-Cγ groups. Post-treatment Fbp1 and Pck1 gene expressions were reduced in the IR-Cγ group but increased in STZ-Cγ animals. Overall, these findings suggest that Cγ is involved in reducing hepatic glucose production, mainly through G6pc inhibition in impaired glucose metabolism disorders.     

Degradation and kinetic modeling of polyvinyl alcohol in aqueous solutions by a H<Subscript>2</Subscript>O<Subscript>2</Subscript>/Mn(II) system

This paper is about the degradation of polyvinyl alcohol (PVA) in aqueous solutions using a H2O2/Mn(II) system. Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC) were applied to analyze the degradation products of PVA, and the results revealed that the backbone chain of PVA could be effectively broken and oxidized. Several unsaturated degradation products, including carboxylic acids, ketones, aldehydes, olefins, and alkynes were also detected and identified by gas chromatography-mass spectrometry (GC-MS), which indicated that higher treatment temperatures would considerably promote the generation of lower molecular weight degradation products. According to the work presented in this paper, the degradation efficiency of PVA increased from 55 % at 60 oC to 99 % at 90 oC after treatment when the initial PVA concentration was 5 %, at pH=3 with a H2O2 and Mn(II) dose of 100 ml/l and 0.6 mol/l, respectively. In addition, kinetic modeling indicated that the experimental results were best fitted by the Page-modified model with an activation energy of 48.78 kJ/mol.     

Nano-calcium carbonate reinforced polypropylene and propylene-ethylene copolymer nanocomposites: Tensile vs. impact behavior

Improvement of both the tensile and impact strength of the same polymeric material has always been a great challenge for the plastic industry. The study focuses on the effect of incorporation of calcium carbonate nanoparticles (0.3 wt% to 15 wt%) into three polypropylene (PP) based matrices viz. PP homopolymer, propylene-ethylene (PP-PE) copolymer and the blend of PP:PP-PE (30:70) to improve their impact behavior without hampering the tensile strength much. A loss in both the tensile and impact properties was observed in PP based nanocomposite. However, PP-PE based nanocomposites showed a significant improvement in impact strength (47 %) at 10 wt% loading with a loss of tensile strength by 22 %. To minimize this loss a blend of PP:PP-PE (30:70) was explored as a matrix. At 10 wt% loading, this matrix showed an improvement of 30 % in impact strength whereas the tensile loss was minimized to 10 %. Further, silane coupling agent which promoted good interfacial adhesion was used for best compositions. The variation of crystalline morphology of the nanocomposites with various formulations was analyzed using differential scanning calorimetry and X-ray diffraction.     

Directly-prelithiated carbon nanotube film for high-performance flexible lithium-ion battery electrodes

Carbon nanotube (CNT) films are very flexible and serve as active materials for lithium-ion batteries (LIBs). Hence, they have high potential as flexible free-standing electrodes for wearable batteries. However, nanocarbon materials such as CNTs and graphene are of limited use as electrodes because they have a large initial irreversible capacity due to the formation of a solid electrolyte interphase (SEI). Herein, we prelithiated the CNT films to make them available as electrodes for flexible batteries by reducing their irreversible capacity. The SEI is pre-formed through a direct prelithiation (DP) method that brings lithium metal into direct contact with CNT films in an electrolyte. As a result, the capacity of directly-prelithiated CNT film electrodes continues to increase to 1520 mAh/g until 350th cycle of charge/discharge and their initial irreversible capacity vanishes. The changes in the electrochemical properties of CNT film electrodes by DP treatment and their flexibility are investigated.