Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

Potential host range of four Phytophthora interspecific hybrids from Clade 8a

In recent years several interspecific hybrids have been reported in the plant pathogenic oomycete genus Phytophthora. Due to the large genotypic and phenotypic changes, these hybrids might have broader or more limited host ranges compared with their parental species. It is crucial to understand the host range of Phytophthora hybrids to minimize the economic losses caused by their infection. The potential host range of four hybrids belonging to Clade 8a of the Phytophthora phylogenetic tree was investigated in this study. Thirty species of herbaceous plants as well as eight species of woody plants were inoculated and monitored for any symptom of infection. In addition, the detached twigs of 32 tree species, fruits of six plant species, tubers of potato, and roots of carrot and sugar beet were investigated for susceptibility to these hybrids. Almost all hybrids caused severe rot on all tested fruits, tubers, and roots, although different isolates showed different pathogenicity on detached tree twigs. All hybrids tested had a different host range compared with their parental species: they were able to infect plants outside the host range of their parents, infect hosts of both parental species, although these parents did not have overlapping hosts, or, in some cases, they were not able to infect hosts infected by the parents.     

Congruity backcrossing as a means of creating genetic variability in self pollinated crops: seed morphology of Phaseolus vulgaris L. and P. acutifolius A. Gray hybrids

Summary Seeds of early generations of three reciprocal congruity-backcross (CBC) pedigrees, developed by backcrossing Phaseolus vulgaris-P. acutifolius hybrids to each of the parent species in alternate generations, exhibited a preponderance of traits (size, shape, color, and pattern) of the cytoplasmic parent. The large size of Red Cloud (V₁), the P. vulgaris parent common to all of the pedigrees, dominated pedigrees with V₁ as the cytoplasmic parent, while the small size and rounded or square shapes of the tepary parents, wild P. acutifolius var. acutifolius PI 263590 or G400445 (A₁₉), wild P. acutifolius var. latifolius PI 406622 (A₁₀), or cultivated P. acutifolius var. latifolius Serowi PI 319443 (A₉), were the majority phenotypes when P. acutifolius was the cytoplasmic parent. Continuing through the second cycle of CBC, that is the second backcross with each of the parent species or the fourth backcross, began an amelioration of the apparent cytoplasmic effect on gene expression, as reciprocal pedigrees became more alike, usually with intermediate expression of parental traits or the appearance of new traits. The large seed size of V₁ was recovered in hybrids with P. acutifolius cytoplasm and the kidney shape of V₁ became rare in hybrids with P. vulgaris cytoplasm. Although the tepary-bean parents represented two subspecies and both cultivated and wild P. acutifolius, the three sets of reciprocal-hybrid pedigrees with P. vulgaris Red Cloud are surprisingly similar. It may be that the exotic parent used to develop a CBC pedigree should be selected more for combining ability in the interspecific cross than for specific economic traits. While the number of generations (six or more) required to produce fertile, intermediate CBC hybrids (that did not require embryo rescue) may preclude routine use of this method by practical plant breeders, the crossability of advanced hybrids with both parental species and the amount of variability apparent in advanced-hybrids progenies suggests that CBC would be valuable for maintaining exotic germplasm in immediately useful forms.     

Quantitative Mapping and Assessment of Environmentally Sensitive Areas to Desertification in Central Iran

Desertification is one of the main environmental and also social and economic problems facing Iran. Seventeen out of 31 Iranian provinces, which are home to approximately 70% of the total population, are affected by desertification. This study aimed to use geographic information system (GIS) and fuzzy logic for mapping environmentally sensitive areas to desertification based on Mediterranean Desertification and Land Use approach in Isfahan province, central Iran. Six desertification indicators including climate, soil, vegetation, soil erosion, groundwater, and management and policy quality were used to determine various types of environmentally sensitive areas to desertification. Seventeen desertification indices affecting the quality of each indicator were spatially mapped and assigned a value between 0 and 1 using a fuzzy logic option of ArcSDM3 software in GIS environment. Results showed that a 21·7% of the study area was classified as critical, 70% as fragile and 5·5% as potential, and 2·9% of the area was not affected by desertification. In the town of Borkhar, 64·2% of the area was classified as critical, followed by the towns of Isfahan and Nayin with 40·2% and 31·8%, respectively. Results at provincial scale indicated that the climate indicator and humidity index with a weighting mean of 0·71 and 0·77 were the most affective factors in the desertification of the study area. The developed model in this study can be used for mapping desertification status in other 16 provinces that contain desert areas. These assessments provide a GIS‐based desertification database that Iran as a member of the United Nation Convention to Combat Desertification can use to report the condition of desertification at national scale. Copyright © 2013 John Wiley & Sons, Ltd.     

Effects of arbuscular mycorrhizal fungal symbiosis for control of Egyptian broomrape (Orobanche aegyptiaca Pers.) in tomato (Lycopersicon esculentum L.) cultivation

The present study assessed the effect of arbuscular mycorrhizal fungi (AMF) on broomrape (Orobanche aegyptiaca Pers.) control to determine its effects on tomato (Lycopersicon esculentum L.) growth indices. This experiment was carried out using a randomized complete block design with four replications. The treatments included three strains of AMF (Glomus mosseae, Glomus intraradices and Glomuse hoe ) at three levels (100, 200 and 300 kg ha^?1). The control treatments (without mycorrhiza) were with and without broomrape (weed infest and weed free). The results showed that the use of G. intraradices and G. mosseae decreased broomrape seed germination, the number of nodules and the dry weight of the broomrape and increased root area and dry weight of the tomato plant when compared to G. hoe and the control treatments without broomrape. The tomato yield in G. intraradices 300 kg ha^?1 treatment increased by 10 and 205% than weed free and weed infest treatments, respectively. Finally, G. intraradices and G. mosseae at, respectively, 200 and 300 kg ha^?1 are recommended for land under tomato cultivation that has been contaminated with broomrape.     

Using kale (Brassica oleracea var. acephala) as a phytoremediation plant species for lead (Pb) and cadmium (Cd) removal in saline soils

Ornamental kale (Brassica oleracea var. Acephala) is usually planted from early autumn until late winter. Since most of the plants used for phytoremediation cannot be grown during this time, kale can be a suitable option for phytoremediation and utilized during autumn and winter in urban landscape, especially in metropolitan areas where high levels of cadmium (Cd) and lead (Pb) pollutions exist. Kale growth in saline soil at different growth stages (germination and vegetative growth stages) was studied in this investigation. A factorial experiment based on completely randomized design (CRD) with four replications was used in this study. Treatments included three levels of sodium chloride (NaCl) (0, 30, and 60 mg/kg), four levels of Cd (0, 4, 8, and 16 mg/kg), and four levels of Pb (0, 1, 5, and 10 mg/kg). Results indicated that increase in Cd and Pb concentrations in the soil decreased fresh and dry weights of the plants. The results of the various growth stages revealed that under salinity stress, kale plants were able to absorb more Pb than Cd and effectively remediate Pb in polluted and saline lands. Cd accumulation in control treatment was 6.2% more than that in the saline treatments, whereas, Pb accumulation in the highest NaCl level, 60 mg/kg salinity treatment was 7.64% more than that of the control condition. Also, proline content of the plants was significantly increased under Cd and Pb stress. From the results of this study, it was concluded that using kale plant is recommended for phytoremediation of saline soils with 10 and 16 mg/kg Pb and Cd contents, respectively.     

Copper and zinc uptake by celery plants grown on acidic soil amended with biosolids

For trace elements, such as copper (Cu) and zinc (Zn), the bioavailability of these elements, Cu and Zn, in biosolids is important because both are essential elements and both are potential contaminants when biosolids are land applied. A greenhouse study was conducted in factorial experiment based on a completely randomized design (CRD) with four replications on a soil treated with four rates of Cu (0, 50, 100, and 150 mg/kg) and four rates of Zn (0, 150, 300, and 450 mg/kg) on celery plants to investigate the distribution and mobility of these elements as well as growth and antioxidant changes of celery. The results of antioxidant changes were inconclusive due to irregular changes with Zn and Cu applications. However, generally the results show that Cu did not affect superoxide dismutase (SOD) or peroxidase (POD) activities in most of the treatments. On the other hand, Zn stimulated SOD and POD activities in most of the treatments. The photosynthesis rate decreased with the applications of Cu and Zn at the rates above 100 and 300 mg/kg and increased in low Cu concentration (50 mg/kg) compared to S (soil without biosolid).     

Effect of Different Drying Methods on the Physicochemical Properties and Bioactive Components of Saffron Powder

Plant Foods for Human Nutrition - Saffron is the most expensive spice in the world; so, determining optimum conditions for its processing is crucial. The most important processing stage of saffron...     

Oxidative Stability of Spray-Dried Microencapsulated Fish Oils with Different Wall Materials

Multilayer microencapsulation of fish oil was evaluated by using fish gelatin (treated with or without microbial transglutaminase [MTGase]), chitosan, and maltodextrin for its ability to control lipid oxidation. This study showed that a mixture containing gelatin and maltodextrin obtained the highest percentage of core release. The oxidative stability of the formulated mixtures and the bulk oils was investigated during a period of 60 days. The peroxide value (PV) was assessed as a parameter for primary oxidation products, and p-anisidine (p-AV) and thiobarbituric acid reactive sub-stances (TBARS) was used to analyze secondary oxidation compounds. Observation of oxidation products showed that combinations of gelatin and maltodextrin made by adding MTGase and a mixture of gelatin and chitosan were able to increase the oxidative stability, and increases in PV and p-AV and TBARS were found for all oils.     

Copper functionalization of polypropylene fabric surface in order to use in fog collectors

Polypropylene fabrics were coated with copper particles using electroless plating, screen printing and wire arc spray coating techniques. Surface morphology of the fabrics was studied using optical and scanning electron microscopes (SEM). Furthermore, tensile strength, electrical conductivity, thermal conductivity, air permeability, water contact angle and fog collection efficiency of the coated fabrics were measured and the obtained results were analyzed. SEM micrographs showed that a very thin and uniform layer of copper deposited on the surface of the electroless plated polypropylene fibers. In the printed or spray coated fabrics the copper particles filled the spaces between yarns and fibers. The polypropylene electroless copper plated fabrics showed higher tensile strength, electrical conductivity, air permeability and thermal conductivity when compared with the fabrics coated with copper screen printed and copper spray coated fabrics. Finally, the obtained results showed that copper electroless plating could increase the fog collection efficiency of polypropylene fabrics considerably. As a conclusion, the surface modified copper electroless polypropylene fabrics are good candidates for fog collection in appropriate regions which need further investigations.