Growth performance of Black Bengal,Saanen, and their crossbred F1 as affected by sex,litter size,and season of kidding

The objective of the present study was to determine the factors that influenced growth performance of the goat kids of Black Bengal (BB), Saanen (SA), and their crossbred F1 (male Bengal × female Saanen [BBSA] and male Saanen × female Black Bengal [SABB]). Data for 674 kids were analyzed from 316 litters and 134 does. All kids were weekly measured on their characteristics (body weight, length, height at the withers, and chest girth) from birth to 11 weeks old. The kid’s breed and sex, litter size, and season of kidding influenced birth weight and other characteristics through the experiment. The SA and BBSA kids showed similar performance, which were higher than BB and SABB kids. Male kids had higher performance than female kids, and kids from a single litter showed the highest performance. Kids born during rainy season showed lower performance than those born in hot and cool seasons. In conclusion, the crossbred BBSA is superior to SABB or BB to raise in tropical climate Moreover, sex, litter size, and kidding season also affected growth performance during the preweaning period up to 11 weeks old.     

Persimmon breeding in Japan for pollination-constant non-astringent (PCNA) type with marker-assisted selection

Oriental persimmon (Diospyros kaki) originated in Eastern Asia, and many indigenous cultivars have been developed in China, Japan, and Korea. These cultivars are classified into four groups based on their natural astringency loss on the tree and seed formation: pollination-constant non-astringent (PCNA), pollination-variant non-astringent (PVNA), pollination-constant astringent (PCA), and pollination-variant astringent (PVA). PCNA is the most desirable type because the fruit can be eaten without any postharvest treatment; therefore, one of the goals of our persimmon breeding programs is to release superior PCNA cultivars. The PCNA genotype is recessive to the other three non-PCNA genotypes, and PCNA-type F₁ offspring are obtained exclusively from crosses among PCNA genotypes. Moreover, the number of superior PCNA cross-parents have been limited. In the late 1980s, inbreeding depression became obvious, especially in terms of fruit size, tree vigor, and productivity. To mitigate the inbreeding, a backcross program using PCNA [(non-PCNA × PCNA) × PCNA] was started in 1990. This process, however, was inefficient because only 15% of the offspring were PCNA, and all offspring had to be grown to the fruiting stage. Therefore, molecular markers linked to the PCNA locus were developed for discriminating PCNA offspring. A molecular marker linked to Chinese PCNA has also been developed.     

Characterization of genes for novel thaumatin-like proteins in Cryptomeria japonica

Thaumatin-like proteins (TLPs) are induced by a variety of phytopathogens in many plants and several TLPs are allergenic. Previously, we isolated three TLP-encoding cDNAs (Cry j 3.1, Cry j 3.2 and Cry j 3.3) from a cDNA library derived from the pollen of Cryptomeria japonica D. Don. Here, we describe three new TLP cDNAs (Cry j 3.4, Cry j 3.5 and Cry j 3.6). We compared the sequences, the genetic map location and the expression patterns of the Cry j 3 genes. The amino acid sequence predicted from Cry j 3.5 exhibits only limited similarity to those predicted from the other Cry j 3 genes. Linkage analysis showed that the Cry j 3.1 to Cry j 3.4 genes are located in the same linkage group, but Cry j 3.5 is located in a different group. Organ-specificity and induction by stresses and plant hormones differed among the Cry j 3 mRNAs. In pollen grains, the Cry j 3.5 mRNA expression level was higher than that of the other Cry j 3 genes. Exposure to UV-B and salt stress induced expression of Cry j 3.1. The ethylene-releasing compound ethephon strongly induced expression of Cry j 3.4. Salt stress and salicylic acid also induced expression of Cry j 3.4. Abscisic acid weakly induced expression of Cry j 3.5. Arachidonic acid strongly induced expression of Cry j 3.4 and Cry j 3.6, and weakly induced that of Cry j 3.3, whereas expression of Cry j 3.1 and Cry j 3.5 was unaffected. These results suggest that the roles of TLPs and the cascades that regulate their expression differ among the members of the TLP family in C. japonica.     

Tree-to-tree and clone-to-clone variations of monoterpenes emitted from needles of hinoki (Chamaecyparis obtusa)

Variations in the composition of low boiling point (LBP) monoterpenes emitted from needle samples of 150 hinoki (Chamaecyparis obtuse) trees (30 strains, each with five clones) native to Shimane Prefecture, Japan, were investigated using a headspace technique. The assays revealed considerable proportional variations especially in the amount of sabinene, which ranged from 24% to 78% of the total LBP monoterpenes. The proportions of α-pinene, myrcene, and limonene negatively correlated with that of sabinene overall. In particular, the proportion of limonene showed clear negative correlation with that of sabinene (r = −0.98). Differences in the proportion of sabinene among five clones in each strain were less than 15% in 22 out of 30 strains, indicating that monoterpene composition is constitutively steady in most strains. In a few strains, however, considerable variation in the composition was observed among clones.     

Structure and regeneration dynamics of dominant tree species along altitudinal gradient in a dry valley slopes of the Bhutan Himalaya

The aim of our study was to characterize the structure and regeneration dynamics of dominant tree species along altitudinal gradient in dry valley slopes of the Bhutan Himalaya. In the typical dry valley slopes of west-central Bhutan, we analyzed forest stratification, tree crown projection, and population structure from lower dry valley bottom (1520 m a.s.l.) to upper humid ridge top (3370 m a.s.l.) across five major forest types: i.e. (1) dry pine forest with Pinus roxburghii as a dominant species; (2) mixed broad-leaved forest with Quercus lanata (evergreen), Quercus griffithii, (deciduous), and Rhododendron arboreum (evergreen) as major canopy species; (3) evergreen broad-leaved forest dominated by Quercus semecarpifolia, Quercus glauca and Quercus oxyodon; (4) cool conifer forest dominated by Abies densa and Tsuga dumosa; (5) cold conifer forest with A. densa and Juniperus recurva as dominants. In general, regeneration pattern of major dominant species shifted from inverse-J (lower altitudes), to sporadic (mid-altitudes), and to uni-modal type (upper altitudes) corresponding to three regeneration trends: (1) invasive at the lower, warm, dry forest under relatively strong human disturbances; (2) stable/balanced at the mid-altitude, in a relatively stable, mature moist evergreen broad-leaved forest with gap regeneration; and (3) poor/low regeneration at the upper, cool, humid conifer forest with a continuously cattle-grazed understory. Overall, regeneration patterns were balanced in all forest types, however care should be taken to prevent excessive exploitation of dry pine forest of lower valley bottom, and to control cattle grazing at higher altitudes. Our findings can be incorporated into management plans for sustainable management and conservation of mountain forests.     

Effect of moisture content of members on mechanical properties of timber joints

To investigate the effect of moisture content (MC) of members on the mechanical properties of timber joints, bending tests of precut joints and shear tests of dowel-type joints were carried out using timbers of Japanese cedar (Cryptomeria japonica D. Don) with three moisture conditions: green, kiln-dried with a MC target of 15%, and over-kiln-dried with a MC target of 5%. For the bending test, timbers were processed with a precut processing machine into “koshikake-ari” (a kind of dovetail joint) and “koshikake-kama” (a kind of mortise and tenon joint). A pair of members was jointed together without mechanical fasteners. Bolts (diameter = 12 mm) and nails (diameter = 2.45 mm) were used as dowels in the shear test. Bolted joints were constructed with one bolt and two metal side plates. Two nails and two metal side plates were used for the nailed joint. For precut joints, no clear effect of MC was recognized on maximum moment and initial stiffness. The maximum strength of mechanical joints assembled with kiln-dried wood was changed by the degree of drying. Stiffness of the joints assembled with kiln-dried specimens was larger than that of the joints assembled with green specimens.Part of this study was presented at the 7th International IUFRO Wood Drying Conference, Tsukuba, July 2001     

Dynamic excitation and static loading tests of glulam lattice floor

A wooden lattice floor with high stiffness and damping capacity has been developed to solve noise problems in wooden apartment houses. The lattice floor consisted of Douglas fir glulam beams with inserted steel plate joints and drift pins. To examine the structural performance of the floor, dynamic excitation and static loading tests were conducted on the full size floor. The first and second order resonance frequencies of the floor were 13.5Hz and 27.0Hz, respectively. These frequencies are similar to the peak frequency of a conventional wooden floor and the combined floor fabricated from glued laminated timber and iron. The maximum static load of the floor was 127kN. The apparent flexural rigidity was less than half the value of several floors studied in the past. However, it is considered that the stiffness is improved by constructing panels and this floor has almost equivalent performance. Relative deflection was not affected by the loading history.Part of this study was presented at the International Wood Engineering Conference, New Orleans, October 1996.     

The regeneration characteristics of Picea jezoensis and Abies sachalinensis on cut stumps in the sub-boreal forests of Hokkaido Tokyo University Forest

The regeneration characteristics of Picea jezoensis Carr. and Abies sachalinensis Masters on cut stumps in natural forest under selection cutting and natural regeneration were studied in a sub-boreal forest of the Hokkaido Tokyo University Forest. The following points were investigated: (1) what decay class of cut stumps are suitable for regeneration of the two conifer species; (2) what part, either a root collar or a cut surface, of a cut stump is suitable for regeneration; and (3) what percentages of cut stumps support conifer seedlings. The percentages of cut stumps that supported conifer seedlings increased as the decay class advanced, but slightly decreased in the latest stage of decay class, V. Both P. jezoensis and A. sachalinensis seedling densities per cut stump and per square meter of cut stumps increased as the decay class advanced. Some root collars in decay class IV supported A. sachalinensis seedlings, but few supported P. jezoensis. Densities of P. jezoensis per cut surface and per square meter of cut surface in decay class IV were higher than those of A. sachalinensis. On the other hand, densities of A. sachalinensis per root collar and per square meter of root collar in decay class IV were higher than those of P. jezoensis. Cut stumps in advanced decay classes are more suitable for regeneration of P. jezoensis and A. sachalinensis than those in early decay classes. Whereas a cut surface is more suitable for regeneration of P. jezoensis, a root collar is more suitable for regeneration of A. sachalinensis. Cut stumps are not sufficient to ensure enough conifer regeneration because not all conifer cut stumps in advanced decay classes support conifer seedlings.     

Rapid, Micro-Methods to Estimate Plant Silicon Content by Dilute Hydrofluoric Acid Extraction and Spectrometric Molybdenum Method

By treating 0.5 g DW of a plant sample directly with 10 ml of a dilute hydrofluoric acid solution (HF solution, 1.5 M HF—0.6 M HCl), all the silica in plant (as much as 150 mg SiO₂) was dissolved within 1 h. After dilution of the extract with 40 mL of distilled water, the silica in the extract was measured by the spectrometric molybdenum yellow method. The molybdenum yellow method, in which silica in 0.1 mL of the diluted extract can be determined in 8 min, is well suited to rapid, micro-estimations of the silica content in plants. In the micro-modification, the size of the plant sample was reduced to 100 mg DW. The analytical procedure was simple, and the analytical time was less than 2 h. The method can save much labor and time, compared with the gravimetric analysis. The dissolution with HF solution and the molybdenum yellow method were also applied to the measurement of the content of silica separated by acid digestion of rice plants. Excellent agreement in the silica measurement of rice plants was confirmed among the direct extraction method, the gravimetric method and the digestion-separation-dissolution method. In the molybdenum yellow method, the addition of boric acid enabled to mask the interference of hydrofluoric acid, and the least amount of citric acid required for the elimination of phosphorus interference was proposed. In conclusion in this report, recommended methods for the rapid estimation of the silica content in rice plants were presented.     

Germination and appressorium formation of Pyricularia oryzae Cavara can be inhibited by reduced concentration of Blasin®Flowable with carbon dioxide microbubbles

We investigated the possibility to reduce the usage of Blasin^®Flowable (BF), a disinfectant inhibiting the germination and appressorium formation of Pyricularia oryzae Cavara conidia, by using carbon dioxide microbubbles (CO₂MB). Germination was significantly inhibited by 10 000-fold diluted BF solution containing CO₂MB generated by the decompression-type generator compared to CO₂ millibubbles (CO₂MMB) and CO₂MB generated by the gas-water circulating-type generator. Appressorium formation in the 10 000-fold diluted BF solution containing both CO₂MBs was less than that in CO₂MMB. Scanning electron microscopy showed wrinkles and dents on the surface of conidia treated with 5 000-fold diluted BF solution containing both CO₂MBs. Via transmission electron microscopy, we observed the expansion of the vacuole and the intracellular space and bloated or absent lipid granules in the conidia treated with BF solution containing both CO₂MBs. Our results show that inhibition of the conidium germination and appressorium formation of P. oryzae Cavara by 10 000-fold diluted BF solution could be achieved by using the decompression-type CO₂MB.