Feed preference and growth response of juvenile Litopenaeus vannamei to supplementation of marine chemoattractants in a fishmeal‐challenged diet

This study compared the feed preference and growth response of Litopenaeus vannamei to chemoattractants. A diet with 3% fishmeal was supplemented with either 3% salmon meal (POS), 3% soy protein concentrate (NEG), 3% krill meal (KRM), 3% squid meal (SQM), 3% shrimp head meal (SHM), 3% shrimp meal (SM), 3% squid liver meal (SLM), or 5% liquid sardine hydrolysate (SAH). Shrimp with a body weight (BW) of 0.99 ± 0.08 g were stocked at 100 animals/m² in 56 tanks of 1 m³ and fed 10 times daily for 74 days. Feed preference was evaluated by feeding shrimp of 10.87 ± 1.82 g in excess twice a day for 10 days in two separate feeding trays allocated in 50 tanks of 0.5 m³. Survival reached 93.3 ± 5.80% and was unaffected by supplementation. Final BW was the highest for shrimp fed the KRM‐supplemented diet (11.97 ± 0.93 g), followed by POS (11.11 ± 0.77 g) and SQM (11.01 ± 1.17 g). Diets SHM, SM, SLM, and NEG showed a lower shrimp BW than POS, but were not statistically different among them. Shrimp fed the SAH diet achieved the lowest BW (10.06 ± 1.02 g). The highest gained yield was obtained with diets KRM and POS. No statistical difference was observed in shrimp yield among other diets. The lowest feed conversion ratio (FCR) was achieved with shrimp fed KRM (1.31 ± 0.05) when compared to diets SHM (1.47 ± 0.05), SAH (1.47 ± 0.07), and SLM (1.45 ± 0.17). Two‐by‐two comparisons indicated that shrimp preferred SHM and KRM, except when these were compared to SQM and SLM. No difference in feed preference was found between diets with SQM and SLM. SAH was the least preferred raw material in all comparisons. Results indicated that KRM acts as a powerful feeding effector and growth enhancer in fishmeal‐challenged diets for whiteleg shrimp. A dietary supplementation with 3% KRM is more effective than the same dose of any other chemoattractant evaluated.     

Suitability of Amaranthaceae and Polygonaceae species as food source for the sugar beet weevil Asproparthenis punctiventris Germar

Journal of Plant Diseases and Protection - This study explores the food plant spectrum of the sugar beet weevil (Asproparthenis punctiventris Germar; Coleoptera: Curculionidae), one of the most...     

Optimising ash wood chairs

In Sweden, forest research has been emphasised on mainly two species of wood, i.e. pine and spruce. However, we have also a number of hardwoods which could be utilised for furniture manufacturing, cabinets etc. Nowadays, these hardwoods are a slumbering resource in our country. Most of our broad leafed species are found as small stands inside our soft wood forests and hence not utilised in the most profitable way. For example, much of our birch wood is ground to paper fibres even if it would be perfect for high valued veneer. Instead, most of our birch. veneer is imported from Finland. In order to increase the interest for Swedish hardwoods we therefore have started research in this field and have now designed a chair made of ash wood,Fraxinus excelsior. Most chairs are made up of structural elements called indetermined frames which makes it a rather tedious task to analyse the internal forces in the frame. However, by using the Finite Element Method, FEM, it has been possible to reduce this drawback. This paper shows how a chair could be analysed, and designed, by use of methods common in other disciplines than furniture manufacturing. We also present results, in the form of stress-strain diagrams, from tests made on Swedish ash.The author wants to thank NUTEK, the Swedish National Board for Industrial and Technical Development for financial support and professor Larsgunnar Nilsson who provided the FEM-program PCFEMP, which was used for all the calculations. Acknowledgement is also made to Bo Skoog who elaborated all testings of the wood specimens     

Cutter head forces and load cell scanning

Among the machinery found in wood manufacturing industries, routers and planers are the most commonly used. These tools, which many times are mounted on metal cylinders, actually operate only briefly, i. e., when a chip is cut from a piece of wood under process. The rest of the time the knife follows the cylinder surface and a cycloid is formed relative to the work piece, which in turn is fed into the machine. A number of knives are mounted on the cutter, which ascertain that the planed surface will become sufficiently planed and does not show too a wavy pattern. This works fine for high revolutions and low feeding speeds even if problems sometimes occur. Factories, however, naturally want to increase the overall manufacturing speed, which means that at the same time more defects are introduced at the planed surface. These defects are the result of the cutting process. In this paper, we examine, by use of a load cell, how the cutting forces vary during the formation of a wood chip. Wood is not an isotropic material and knots and other anomalies make the evaluation harder. In order to simplify the conditions, experiments are also shown from the cutting of a plastic polymer material as well as Medium Density Fibreboard (MDF). It is shown that the work piece vibrated intensely which littered all output data from the cell. Experience from the experiments however made it possible to design a computerised filter which saved only those registrations which were of interest while the others were set to zero. For beech, the forces were found to be of the magnitude 50 N/cm opposite to the feeding direction while the tranverse forces changed signs and had a magnitude of about 5 N/cm.     

Shear strength of beam splice joints with glued-in rods

Splitting failure in beam splice joints with glued-in rods parallel to grain in endwood subjected to pure shear is considered. A simple theoretical expression based on beam-on-elastic-foundation theory and quasi-non-linear fracture mechanics is presented for calculation of the joint strength. Tests were conducted on jointed beams in a four-point bending test setup in which the joints were located at the point of pure shear force. Hardwood dowels with a diameter of 12mm and a glued-in length of 120mm were used as rods, and various beam cross sections and dowel configurations were tested. The theory presented is found to agree well with test results in all cases in which the edge distance of the glued-in rods is relatively small. Some test results indicate that the theory may be conservative in case of large edge distances.     

Urban evictions,public housing and the gendered rationalisation of kampung life in Jakarta

The dispossession of urban communities across class and racial lines is a global phenomenon linked to the expansion of international investment in the development of ‘exemplary’ city space. However, city evictions are also historically informed and gendered processes which are continuous with past colonial and postcolonial urban rationalisation projects. Drawing on testimonies of women evictees in Jakarta, as well as interviews with public housing managers, this article details the gendered nature of the rationalisation of urban life in the context of a contemporary evictions regime. We argue that the rationalisation of urban space serves to sharpen the gender order by placing material constraints on women's roles, limiting their economic activities and defining them as hygiene‐responsible housewives. Further, and in turn, the limited provision of ‘rusunawa’ public housing, which we show to be a gendered spatial and social transition informed by state doctrine on the family, provides the state with justification for dispossession itself. Finally, women's everyday acts of refusal and resistance show not only that kampung forms of social life continue to be preserved in Jakarta, but also that rationalisation itself is a negotiated and contingent process.     

Water availability affects nectar sugar production and insect visitation of the cup plant Silphium perfoliatum L. (Asteraceae)

The perennial cup plant (Silphium perfoliatum L.) is considered as an alternative feedstock to maize for biogas plants. Due to its ecological advantages of an extensive management and function as food resource for pollinators, it can be grown in Ecological Focus Areas (EFAs) since 2018. However, studies at the Julius Kühn-Institute in Braunschweig (Germany) showed that the assumed advantage of the cup plant of a high drought tolerance could not be confirmed regarding aspects of crop production and yield. We complemented this experiment by assessing how different soil moisture conditions affect the production of floral resources and insect visitation. In 2014, we sampled three irrigated and three rainfed plots of the cup plant. We quantified the nectar volume and sugar mass per inflorescence, the number of inflorescences per plant and calculated the total nectar sugar production. We further counted insect visitation on the inflorescences. Due to reduced numbers of inflorescences per plant and an earlier harvest, the estimated nectar sugar production was 58 kg/ha regarding irrigated and 20 kg/ha regarding rainfed plots. Honeybee visitation per inflorescence was about twice as high in the irrigated plots. Furthermore, the early harvest is a disadvantage for wild pollinators with a late activity period.     

Virulence studies of Swedish net blotch isolates (Drechslera teres) and identification of resistant barley lines

Six Swedish and one Canadian single spore isolate of Drechslera teres f. teres were used to screen 109 barley lines for disease resistance and to select a differential set of barley lines for use in assessing pathogen virulence. A large variation for net blotch resistance was found among the 109 barley lines which were classified into four groups, those showing: 1) only resistant reactions; 2) differential reactions; 3) only intermediate reactions and 4) only susceptible reactions. The European commercial varieties included, showed susceptibility to all Swedish isolates, but a few were resistant to the Canadian isolate. The 18- member differential set separated 25 Swedish and two Canadian isolates of D. teres into 14 pathotypes, three of which made up 59% of the isolates. Only one barley differential (CI 9776) was resistant to all net form isolates. Host selection on the pathogen seems to be present as all six isolates obtained from cv. Golf belonged to the same pathotype and 4 of 5 isolates from cv. Karin shared the same virulence pattern. The net form of net blotch (D. teres f. teres) predominated in the sampled regions and only one of 26 Swedish isolates was of the spot form (D. teres f. maculata). This revised version was published online in July 2006 with corrections to the Cover Date.     

Aluminium solubility mechanisms in moderately acid Bs horizons of podzolized soils

The processes controlling the retention and release of aluminium in acid forest soils are still subject to controversy, and therefore a universal hypothesis as to what mechanisms are operating has not been firmly established. By studying the Bs horizons of Swedish and Swiss podzolized soils, and by analysing data in the literature, we have found that aluminium hydroxide, and in some cases also poorly ordered imogolite, may control Al solubility in moderately acid (pH > 4.2–4.3) Bs horizons. The strongest evidence in support of the presence of a quickly reacting Al(OH)₃ pool came from the temperature dependence of Al solubility in a Bs horizon, which was consistent with the reaction enthalpy of an Al(OH)₃ phase such as gibbsite, and from the observation that the ion activity product for Al(OH)₃ was the same regardless of whether equilibrium was reached from over‐ or undersaturation. The pool of Al(OH)₃ is commonly small and may be completely dissolved after large additions of acid. This may be explained by the continuing redissolution of reactive Al(OH)₃ to form less soluble imogolite‐type phases. By using the same methods it was found that soil suspensions did not reach equilibrium with poorly ordered imogolite even after 17 days. Thus, imogolite probably does not control Al solubility in the short term in many soils despite the common occurrence of this mineral. This is due to the relatively slow kinetics of imogolite formation and dissolution, especially at low temperatures and at small solution H₄SiO₄ concentrations.     

Surgical removal of a dermoid cyst from the bony part of the nasolacrimal duct in a Scottish highland cattle heifer

The ophthalmologic, radiologic and surgical findings of a 2-year-old Scottish Highland Cattle heifer with a dermoid cyst within the bony part of the nasolacrimal duct and the successful treatment are presented.