Nano-calcium carbonate reinforced polypropylene and propylene-ethylene copolymer nanocomposites: Tensile vs. impact behavior

Improvement of both the tensile and impact strength of the same polymeric material has always been a great challenge for the plastic industry. The study focuses on the effect of incorporation of calcium carbonate nanoparticles (0.3 wt% to 15 wt%) into three polypropylene (PP) based matrices viz. PP homopolymer, propylene-ethylene (PP-PE) copolymer and the blend of PP:PP-PE (30:70) to improve their impact behavior without hampering the tensile strength much. A loss in both the tensile and impact properties was observed in PP based nanocomposite. However, PP-PE based nanocomposites showed a significant improvement in impact strength (47 %) at 10 wt% loading with a loss of tensile strength by 22 %. To minimize this loss a blend of PP:PP-PE (30:70) was explored as a matrix. At 10 wt% loading, this matrix showed an improvement of 30 % in impact strength whereas the tensile loss was minimized to 10 %. Further, silane coupling agent which promoted good interfacial adhesion was used for best compositions. The variation of crystalline morphology of the nanocomposites with various formulations was analyzed using differential scanning calorimetry and X-ray diffraction.     

Über die Abhängigkeit der Eizahl und Entwicklung des Getreideplattkäfers,Oryzaephilus mercator Fauv. (Col., Cucujidae) von der Nahrung

The oviposition and development of the grain bettle Oryzaephilus mercator Faur.on dry fruit meals. Oryzaephilus mercator showed enormous variation in egg laying on different dry fruit meals (apricot, cashew, almond, groundnut, coconut, fig, date and raisin). The lowest egg period was 4.1 days on almond and the highest on apricot 5.1 days. The egg mortality on various meals differed to a small extent (11.8 to 14.1%). The larval period ranged between 22.7 to 34.3 days. The larval mortality ranged between 7.8% (almond) to 94.4% (raisin).     

Response of confection sunflower (Helianthus annuus L.) grown in a semi‐arid environment to planting date and early termination of irrigation

Adjustments on planting date and on the time to terminate irrigation may reduce agricultural water use. However, such management practices in regions with extreme weather conditions have the potential to negatively affect yield. A 3‐year (2012–2014) study was conducted on a clay‐loam soil in a cool, semi‐arid environment to (i) determine the response of confection sunflower to planting date and irrigation termination timing and (ii) identify the relative importance of yield components in irrigated confection sunflower across planting dates. Early May planting had considerable negative effects on all studied variables, except on the percentage of large seeds. The highest yield of total and large seeds was obtained from the late May plantings, averaging 3,777 and 3,379 kg/ha, respectively. None of the irrigation strategies affected the measured variables. However, the interaction between planting date and termination of irrigation significantly affected the 1,000‐seed weight. Our study revealed the last week of May as suitable planting period for confection sunflower in the semi‐arid north‐western region of Wyoming, USA, and that irrigation on heavy soils may be terminated as early as at R5.5 stage without a significant yield reduction. The path‐coefficient analysis indicated head diameter and the number of seeds per head as important traits that significantly influence the yield of confection sunflower across planting dates.     

Effect of irrigation on tillering in wheat,triticale and barley in a water-limited environment

Summary The effect of irrigation on tillering and tiller mortality in varieties of wheat (Triticum aestivum and T. durum), triticale and barley was studied under field conditions. Low temperature in the early stages of growth promoted production of tillers whereas increase in temperature during extension growth phase increased tiller mortality. More than 1000 tillers m^–2 were produced with five irrigations but 40% or more died. With limited water availability tiller production was reduced but so was their mortality. Grain yield in wheat and triticale was positively correlated with productive tillers and negatively correlated with the maximum number of tillers produced in wheat and barley grown under limited irrigation conditions. Varieties with a capacity to produce fewer tillers were identified. Some of them proved more stable in yield. No correlation was found between tiller number and grain yield in the frequently irrigated treatment.     

High yielding spring bread wheat germplasm for global irrigated and rainfed production systems

Global wheat (Triticum aestivum L.) production must increase 2% annually until 2020 to meet future demands. Breeding wheat cultivars with increased grain yield potential, enhanced water-use efficiency, heat tolerance, end-use quality, and durable resistance to important diseases and pests can contribute to meet at least half of the desired production increases. The remaining half must come through better agronomic and soil management practices and incentive policies. Analyses of the recent International Yield Trials indicate that grain yields of the best new entries were usually 10% higher than the local checks globally, as well as within a country across sites. Variation in yield across sites within a country/region underline the role of genotype × environment (GE) interaction and provides opportunities to select for stable genotypes, which is not often done. The lack of proper analysis undermines proper utilization of germplasm with high yield potential and stability in the national wheat breeding programs. Some of the best performers in irrigated areas were amongst the best in semiarid environments, reinforcing the fact that high yield potential and drought tolerance can be improved simultaneously. The best performing lines often had genotypic base of widely adapted genotypes Kauz, Attila, Baviacora, and Pastor, with genetic contributions from other parents including synthetic wheat. We recommend within country multilocation analysis of trial performance for a crop season to identify lines suiting particular or different locations within a country. The immediate feedback on GE interaction will also help in breeding lines for countries having substantial variation across locations and years.     

Participatory varietal selection in rice in Nepal in favourable agricultural environments – A comparison of two methods assessed by varietal adoption

Two participatory approaches to varietal selection were compared in February-sown (Chaite) rice and main-season rice in high potential production systems in Nepal. One method, called farmer managed participatory research (FAMPAR), was researcher intensive, while the other, called informal research and development (IRD), demanded fewer resources. The trials were conducted in 18 villages in high potential production systems in Chitwan and Nawalparasi districts of Nepal. Six new varieties of Chaite rice and 16 of main-season rice were tested in over 300 trials of Chaite rice and nearly 1100 trials of main-season rice over two years in 1997 and 1998. Surveys were done in 1997, 1998 and 1999 to record the extent of adoption and spread of the new rice varieties in the study villages. In many cases, farmers tested varieties for two years before deciding whether to adopt or drop them. Varieties were quite widely accepted, adopted for niches in a few villages, or rejected. The two participatory approaches identified the same varieties, but FAMPAR, which used formal survey methods, was more useful for diagnosing reasons for adoption or rejection. However, IRD used much cheaper anecdotal methods of evaluation, so it was more cost-effective. Moreover,farmer-to-farmer seed dissemination was higher in IRD villages, probably because farmers in FAMPAR villages felt that the project would re-supply seed if needed. The benefits from both approaches are considerable, but to adopt them substantial policy changes in varietal testing, release and extension systems will be required. This revised version was published online in August 2006 with corrections to the Cover Date.     

Moricandia arvensis cytoplasm based system of cytoplasmic male sterility in Brassica juncea: Reappraisal of fertility restoration and agronomic potential

Cytoplasmic male sterility (CMS) system based on the cytoplasm from Moricandia arvensis (mori) was investigated for fertility restoration and agronomic potential. Fertility restorer gene for mori CMS was introgressed from cytoplasm donor species as all the evaluated Brassica juncea genotypes (155) acted as sterility maintainers. The allosyndetic pairing between M^a and the A/B genome chromosomes in the monosomic addition plants (2n= 18II + 1M^a) facilitated the gene introgression. Partial fertility restoration (43–52% pollen grain stainability) in F₁ hybrids and absence of segregation for male sterility in F₂ progenies suggested gametophytic control of fertility restoration. The pollen fertility in the F₁ hybrids was, however, sufficient to ensure complete seed set upon bag selfing. Introgression from M. arvensis also helped in correction of chlorosis associated with mori cytoplasm in CMS and fertile alloplasmic B. juncea plants. Yield evaluation of thirty F₁ hybrids having the same nuclear genotype but varied male sterilizing cytoplasms (mori, oxy, lyr, refined ogu), in comparison to respective euplasmic hand bred control hybrids, allowed an estimate of yield penalty associated with different CMS systems. It ranged from 1.8% to 61.6%. Hybrids based on cytoplasmically refined ogu were most productive followed by those based on cytoplasmically refined mori CMS. The male sterility systems emanating from somatic hybridization were found superior than those developed from sexual hybridization.