Relationships between body size and secondary sexual characters,and sperm characters in male Dolly Varden char (Salvelinus malma)

In Salmonidae, subordinate males are exposed to higher risks of sperm competition than dominant males and thus are expected to improve the sperm characteristics (sperm concentrations, sperm velocity and sperm longevity). In this study, we investigated the relationships between body size and secondary sexual characters (breeding colour, hump height and snout length), and sperm characteristics of one‐year‐old (newly matured) Dolly Varden char. Small males displayed higher sperm concentrations than large males. Moreover, males with dull breeding colours, but not with lesser snout length and hump height, displayed an increased sperm velocity compared to males with bright colours, suggesting a trade‐off between sperm quantity and the investment in breeding colour. In addition, sperm longevity decreased as sperm swimming velocity increased. These findings indicate that small males with dull breeding colours improve the quantity and quality of their sperm to a great extent to enhance their chances of reproductive success.     

Comparison of bacterial endotoxin lipopolysaccharide concentrations in the blood,ovarian follicular fluid and uterine fluid: a clinical case of bovine metritis

We investigated the concentration of the bacterial endotoxin lipopolysaccharide (LPS) in the blood, ovarian follicular fluid and uterine fluid of a clinical case of bovine metritis. A 2-year-old lactating Holstein cow exhibited continuous fever >39.5°C for more than 2 weeks after normal calving. The cow produced a fetid, watery, red-brown uterine discharge from the vagina and was diagnosed with metritis. The LPS concentrations in plasma and uterine fluid were 0.94 and 6.34 endotoxin units (EU)/ml, respectively. One of seven follicles showed an extremely high level of LPS (12.40 EU/ml) compared to the other follicles (0.62–0.97 EU/ml). These results might suggest the presence of high concentration of LPS in follicles in cows with postpartum metritis.     

Effects of acrosomal conditions of frozen-thawed spermatozoa on the results of artificial insemination in Japanese Black cattle

The purposes of this study were to examine the relationship between male artificial insemination (AI) fertility and sperm acrosomal conditions assessed by new and conventional staining techniques and to identify possible reproductive dysfunctions causing low conception rates in AI using frozen-thawed spermatozoa with poor acrosomal conditions in Japanese Black bulls. We investigated individual differences among bulls in the results concerning (1) acrosomal conditions of frozen-thawed spermatozoa as assessed by not merely peanut agglutinin-lectin staining (a conventional staining technique) but also immunostaining of acrosomal tyrosine-phosphorylated proteins (a new staining technique), (2) routine AI using frozen-thawed spermatozoa as assessed by pregnancy diagnosis, (3) in vivo fertilization of frozen-thawed spermatozoa and early development of fertilized eggs as assessed by superovulation/AI-embryo collection tests and (4) in vitro fertilization of frozen-thawed spermatozoa with oocytes. The percentages of frozen-thawed spermatozoa with normal acrosomal conditions assessed by the abovementioned staining techniques were significantly correlated with the conception rates of routine AI, rates of transferable embryos in superovulation/AI-embryo collection tests and in vitro fertilization rates. These results are consistent with new suggestions that the distribution of acrosomal tyrosine-phosphorylated proteins as well as the acrosomal morphology of frozen-thawed spermatozoa are AI fertility-associated markers that are valid for the prediction of AI results and that low conception rates in AI using frozen-thawed spermatozoa with poor acrosomal conditions result from reproductive dysfunctions in the processes between sperm insemination into females and early embryo development, probably failed fertilization of frozen-thawed spermatozoa with oocytes.     

Mitigation of nitrous oxide (N2O) emission from swine wastewater treatment in an aerobic bioreactor packed with carbon fibers

Mitigation of nitrous oxide (N₂O) emission from swine wastewater treatment was demonstrated in an aerobic bioreactor packed with carbon fibers (CF reactor). The CF reactor had a demonstrated advantage in mitigating N₂O emission and avoiding NOx (NO₃ + NO₂) accumulation. The N₂O emission factor was 0.0003 g N₂O‐N/gTN‐load in the CF bioreactor compared to 0.03 gN₂O‐N/gTN‐load in an activated sludge reactor (AS reactor). N₂O and CH₄ emissions from the CF reactor were 42 g‐CO₂ eq/m³/day, while those from the AS reactor were 725 g‐CO₂ eq/m³/day. The dissolved inorganic nitrogen (DIN) in the CF reactor removed an average of 156 mg/L of the NH₄‐N, and accumulated an average of 14 mg/L of the NO₃‐N. In contrast, the DIN in the AS reactor removed an average 144 mg/L of the NH₄‐N and accumulated an average 183 mg/L of the NO₃‐N. NO₂‐N was almost undetectable in both reactors.     

Plywood frame corner joints with glued-in hardwood dowels

This paper presents research on plywood frame corners jointed to glulam beams and columns by means of glued-in hardwood dowels. The frame corner was made of a solid block of ordinary plywood of the same width as the glulam beams and with plies parallel to the plane of the frame to avoid splitting due to stress perpendicular to the grain. Hardwood dowels with a diameter of 12mm and a maximum glued-in length of 120mm were glued into drilled holes in the plywood corner and glulam beam ends parallel to the grain direction of the beams to form a momentresisting joint. Static bending tests were conducted of frame corners with 100 X 200mm² and 120 X 420mm² beam cross sections. Bending capacities of the joints corresponding to a modulus of rupture of the jointed glulam beams of about 30MPa were obtained for both closing and opening moments for the small cross sections, and about 22MPa was obtained for the large cross sections. Simple design models for calculation of joint strength and rotational stiffness are also presented.     

Salt distribution in response to optical stratification porosity and relative windspeed in a coastal forest in Niigata, Japan

Wind velocity, vertical stand structure and seasalt distribution were measured at various heights inside a plantation of coastal pine forest, with thinning and unthinning, to assess whether any relationships exist between the wind profile, stand structure and seasalt distribution in the coastal pine forest. The vertical stand structure, i.e., optical stratification porosity (OSP), which is defined as vertical distribution of the proportion of sky hemisphere not obscured by tree elements inside a forest stand, was determined for each height by computer analysis of digital images taken with a hemispherical lens. The distribution of OSP in the coastal forest follows the Lambert-Beer's law with absorbency coefficient (). The relative windspeed within canopy can be described using the exponential form with the attenuation coefficient (). The sea-salt was collected using salt gauze (a surgical dressing of loosely woven cotton) both inside and outside the coastal forest, and the distribution of sea-salt within canopy was also in accordance with an exponential function. The relationships among windspeed, OSP and sea-salt indicate that the distributions of both sea-salt and windspeed within canopy were very closely correlated with the distribution of OSP. A linear relationship between OSP and sea-salt has been found. Additionally, linear regression between coefficients and has been obtained as well. Based on these relationships between OSP, wind and sea-salt in the coastal forest, the sea-salt distribution and wind profile within the canopy of the coastal forest can be predicted according to OSP. These results may therefore be useful in analyzing the effects of sea-salt on vegetation and evaluating the filter functions of coastal forests.This revised version was published online in November 2005 with corrections to the Cover Date.     

The regeneration characteristics of Picea jezoensis and Abies sachalinensis on cut stumps in the sub-boreal forests of Hokkaido Tokyo University Forest

The regeneration characteristics of Picea jezoensis Carr. and Abies sachalinensis Masters on cut stumps in natural forest under selection cutting and natural regeneration were studied in a sub-boreal forest of the Hokkaido Tokyo University Forest. The following points were investigated: (1) what decay class of cut stumps are suitable for regeneration of the two conifer species; (2) what part, either a root collar or a cut surface, of a cut stump is suitable for regeneration; and (3) what percentages of cut stumps support conifer seedlings. The percentages of cut stumps that supported conifer seedlings increased as the decay class advanced, but slightly decreased in the latest stage of decay class, V. Both P. jezoensis and A. sachalinensis seedling densities per cut stump and per square meter of cut stumps increased as the decay class advanced. Some root collars in decay class IV supported A. sachalinensis seedlings, but few supported P. jezoensis. Densities of P. jezoensis per cut surface and per square meter of cut surface in decay class IV were higher than those of A. sachalinensis. On the other hand, densities of A. sachalinensis per root collar and per square meter of root collar in decay class IV were higher than those of P. jezoensis. Cut stumps in advanced decay classes are more suitable for regeneration of P. jezoensis and A. sachalinensis than those in early decay classes. Whereas a cut surface is more suitable for regeneration of P. jezoensis, a root collar is more suitable for regeneration of A. sachalinensis. Cut stumps are not sufficient to ensure enough conifer regeneration because not all conifer cut stumps in advanced decay classes support conifer seedlings.     

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.