Detection of bovine leukocyte antigen DRB3 alleles as candidate markers for clinical mastitis resistance in Holstein x Zebu

Bovine leukocyte antigen DRB3 alleles from Holstein x Zebu crossbred dairy cows (n = 409) were analyzed using the PCR-RFLP technique. Exon II of DRB3 was amplified using locus-specific primers (HLO30/HLO32), followed by digestion with 3 restriction enzymes (RsaI, BstyI, and HaeIII). Forty alleles were found with frequency ranging from 0.005 to 0.139. The most frequently detected alleles of Holstein x Zebu were DRB3*16, *51, *23, *11, *8, and *1, accounting for 61.12% of the alleles in the population. Detection of candidate alleles for clinical mastitis occurrence was performed by logistic regression. It was found that percentage of Holstein fraction in crossbred cows had a nonsignificant effect (P > 0.05). However, parity had a significant effect on mastitis occurrence. In addition, DRB3*1 and *52 were the most associated with the occurrence of clinical mastitis, whereas *15, *51, and *22 were associated with resistance in crossbred populations. This is the first report of association of DRB3*15 and *51 with mastitis resistance. The association was validated by examining the candidate alleles in another commercial population. Highly susceptible (n = 43) and resistant (n = 42) groups of Holstein x Zebu cows were investigated. The result confirmed that DRB3*1 and *52 could be considered as susceptibility alleles, whereas *15, *51, and *22 could be considered as resistant alleles in Holstein x Zebu raised under tropical conditions. In addition, allele effects on 305-d milk production were estimated by BLUP. It was shown that most alleles associated with high clinical mastitis occurrence were related to increased milk yield. This study revealed that allele DRB3*10 had the greatest effect on increasing milk yield with moderate resistance to clinical mastitis, which could be used as a potential marker for selection in dairy genetic evaluation.     

Effects of forage ensiling and ration fermentation on total mixed ration pH,ruminal fermentation and performance of growing Holstein‐Zebu cross steers

Our objective was to determine the effect of forage ensiling and ration fermentation on total mixed ration pH, ruminal fermentation and animal performance. Thirty Holstein‐Zebu cross steers were allotted to feeding treatments for 188 days in a randomized complete block design including: fresh grass‐total mixed ration (GTMR; pH 4.7), grass silage‐TMR (STMR; pH 4.0) and fermented‐TMR (FTMR; pH 3.5). Average daily gain for STMR was greatest during the first 3 months period; however, that for FTMR tended to be greater than GTMR during the second 3 months period (P < 0.10). During the second period dry matter intake for STMR was the greatest (P < 0.01), but feed conversion ratio (P < 0.01) and cost per gain (P < 0.01) were the least for FTMR. Protein digestibility tended (P < 0.10) to be greater for FTMR than STMR and fat digestibility was greater (P < 0.05) for GTMR and FTMR than STMR. FTMR had less (P < 0.01) ruminal NH₃‐N content than STMR. Total volatile fatty acids post‐feeding was greatest for GTMR (P < 0.01). Ruminal proportions of acetic and butyric acids were greater for FTMR than GTMR (P < 0.05); in contrast, propionic acid was greater for GTMR (P < 0.05). Utilizing silage or total ration fermentation did not negatively impact on ruminal pH. STMR and FTMRs can be used to maintain performance of growing crossbred Holstein steers.     

Kinetics and isotherms of oxytetracycline adsorption on β‐cyclodextrin/carboxymethylcellulose hydrogel films

Oxytetracycline (OTC), widely used as an antibiotic substance in aquaculture, has an adverse effect on environmental and public health. The aim of this paper was to demonstrate that OTC can be removed by hydrogel films composed of β‐cyclodextrin/carboxymethylcellulose (β‐CD/CMC) with esterification‐crosslink method. Oxytetracycline adsorption experiments were performed with an initial pH of 1–12 and an initial concentration of 10–500 mg/L. The experimental data were fitted with Langmuir and Freundlich isotherms and compared using linear and nonlinear models. The experimental results indicate that OTC's adsorption capacity depends on the active β‐cyclodextrin content. The optimal pH was around 8.     

Synthesis of APTMS-Functionalized SiO2/TiO2 Transparent Film Using Peroxo Titanic Acid Refluxed Solution for Formaldehyde Removal

Amine-functionalized SiO₂/TiO₂ photocatalytic films have been synthesized using the peroxo titanic acid (PTA) approach coupled with the sol-gel dip-coating method. The 3-aminopropyl-trimethoxysilane (APTMS) and methyltrimethoxysilane (MTMOS) were employed as the amine functional groups and silica precursor. The effects of the ratio of APTMS/MTMOS, PTA refluxed time, and pH of prepared sol on the characteristics and the formaldehyde degradation efficiency were investigated. Physicochemical properties of prepared photocatalysts were characterized with nitrogen adsorption–desorption isotherm measurement, SEM, X-ray diffraction (XRD), UV-vis spectrophotometer, and Fourier transform infrared (FTIR) spectroscopy. The XRD and FTIR results indicated that the obtained photocatalysts consisted of –NH₂ groups, SiO₂, and anatase TiO₂. The photocatalytic films showed high transmittance of 80–90% in the visible light region. The obtained film prepared with the APTMS/MTMOS ratio of 0.03, pH of 1.8, and 10 h of refluxed time possessed high specific surface area (604.0 m² g^?1) and 85% formaldehyde degradation efficiency. The enhancement of formaldehyde degradation efficiency was observed when increasing the PTA refluxed time. The repeatability of photocatalytic film was also tested, and the degradation efficiency was 92.0% of initial efficiency after seven cycles.     

Effect of Co-Dopants in TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> Thin films on the Formaldehyde Degradation

Titanium dioxide (TiO₂)–silicon dioxide (SiO₂) thin films were synthesized using the peroxo titanic acid approach (PTA) combined with the sol–gel method at low temperature around 100°C. The effects of type and amount of dopants of ferric (Fe³⁺) or thiourea (N-S) and co-dopants of Fe³⁺ and N-S on the films physicochemical properties and on the photocatalytic degradation of the methylene blue and formaldehyde under UV and visible light irradiation were investigated. Physicochemical properties of photocatalysts were characterized by X-ray diffraction, transmission electron microscopy, wavelength-dispersive X-ray fluorescence spectrometry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and UV–Vis spectroscopy. The results showed that the TiO₂ crystal phases obtained from this method were exclusively anatase and the needle-like crystals have an average diameter of 10–25 nm. Compared with the single dopant of 1.0 wt.% Fe³⁺ or 0.125 wt.% N-S that was the optimal concentration for photocatalytic degradation of methylene blue and formaldehyde, the co-dopants of 0.125 wt.% N-S + 1.0 wt.% Fe³⁺ furthermore increased the degradation efficiency. Co-dopants of 0.125 wt.% N-S + 1.0 wt.% Fe³⁺ in TiO₂–SiO₂ films were considered to play synergistic roles in narrowing TiO₂ band gap resulting in the higher methylene blue and formaldehyde degradation efficiency. Since the crystal grain size of TiO₂–SiO₂ films synthesized by the PTA method is small, in the visible light region, the high transmittance was attainable to 80% with no-doped and dropped to 50–60% with doped thin films.