A review on breeding and genetic strategies in Iranian buffaloes (<Emphasis Type="Italic">Bubalus bubalis</Emphasis>)

The aim of current study was to review breeding progress and update information on genetic strategies in Iranian buffaloes. Iranian buffalo is one of the vital domestic animals throughout north, north-west, south and south-west of Iran with measurable characteristics both in milk and meat production. The species plays an important role in rural economy of the country due to its unique characteristics such as resistance to diseases and parasites, having long productive lifespan and showing higher capability of consuming low-quality forage. In Iran, total production of milk and meat devoted to buffaloes are 293,000 and 24,700 tons, respectively. Selection activities and milk yield recording are carrying out by the central government through the Animal Breeding Centre of Iran. The main breeding activities of Iranian buffaloes included the estimation of genetic parameters and genetic trends for performance traits using different models and methods, estimation of economic values and selection criteria and analysis of population structure. Incorporating different aspects of dairy buffalo management together with improved housing, nutrition, breeding and milking, is known to produce significant improvements in buffalo production. Therefore, identifying genetic potential of Iranian buffaloes, selection of superior breeds, improving nutritional management and reproduction and developing the education and increasing the skills of practical breeders can be useful in order to enhance the performance and profitability of Iranian buffaloes.     

Time consumption, productivity, and cost analysis of the motor manual tree felling and processing in the Hyrcanian Forest in Iran

An empirical time study was conducted to evaluate the per- formance of the current felling and tree processing methods used in Northern Iran’s Hyrcanian forest. Motor-manual felling is done mostly in winter, while tree processing starts when the felling season ends. We identified the elements of felling and processing work phases, and 142 cycles and 110 cycles were respectively recorded for felling and proc- essing. On the basis of data analysis (time study), we developed statisti- cal models of effective time consumption in the respective work phase and for its total productivity. The production rate of felling with and without delay time was 9.7 and 11.65 trees per hour (0.17 USD·m -3 and 0.21 USD·m -3 ), and the average production cost with and without delay was 1.21 USD and 1.45 USD per tree, respectively. The average produc- tivity of processing was 35 m 3 per effective hour and the average unit cost of processing was 0.22 USD·m -3 .     

Genetic correlations between growth and reproductive traits in Zandi sheep

For the first time, the current study reports the genetic and phenotypic correlations between growth and reproductive traits in Zandi sheep. The data were comprised of 4,309 records of lamb growth traits from 1,378 dams and 273 sires plus 2,588 records of reproductive traits from 577 ewes. These data were extracted from available performance records at Khojir Breeding Station of Zandi sheep in Tehran, Iran, from 1993 to 2008. Correlations were estimated from two animal models in a bivariate analysis using restricted maximum likelihood procedure between lamb growth traits [birth weight (BW), weaning weight at 3 months of age (WW), as well as six-month weight (6 MW)] and ewe reproductive traits [litter size at birth (LSB), litter size at weaning (LSW), total litter weight at birth (TLWB), and total litter weight at weaning (TLWW)]. The genetic correlations between BW and reproductive traits varied from low to high ranges from 0.10 for BW–LSB to 0.86 for BW–TLWB. WW was moderately (0.37) to highly (0.96) correlated with all the reproductive traits. Moreover, the genetic correlations were observed between 6 MW and reproductive traits, varied from 0.19 to 0.95. Relationships between growth and reproductive traits ranged from 0.01 for BW–LSW to 0.28 for BW–TLWB in phenotypic effects. Results indicated that selection to improve WW would have high effect on genetic response in TLWW, and also, these results could be effective for all of the reproductive traits in Zandi sheep.     

Irrigation effects on diameter growth of 2-year-old Paulownia tomentosa saplings

Species of Paulownia are fast-growing trees that are planted in many countries in green spaces and agroforestry systems. We studied the influence of irrigation on the diameter growth of 2-year-old Paulownia tomentosa saplings planted in 3 m 9 3 m grids at Nazlou Campus of Urmia University, Iran. Completely randomized experimental design was used with four irrigation amount, viz.10, 15, 20 and 25 L, and three irrigation intervals, viz. 3-and 6-days, in 8 replications. During the growth season, we measured collar diameters of all saplings at the end of each month. Diameter growth declined with reduced irrigation amount and increased irrigation interval. The lowest average diameter growth(9 mm) was recorded for 10 L water at 6-day intervals and maximum average diameter growth(28.7 mm) was recorded for 25 L volume at 3-day intervals. The latter treatment resulted in significantly greater diameter growth than any other treatment(except20 L at 3-day intervals). More than 80 % of diameter growth was achieved in the first 3 months. Therefore, it is essential to irrigate with 25 L of water at 3-day intervals during the first three growth months to achieve maximum diameter growth for 2-year-old P. tomentosa saplings.     

Genetic analysis of growth rate and Kleiber ratio in Zandi sheep

Genetic parameters for average daily gain from birth to weaning (ADGa), birth to 6 months (ADGb), weaning to 6 months (ADGc), weaning to yearling age (ADGd), and corresponding Kleiber ratios (KRa, KRb, KRc, and KRd) were estimated by using records of 3,533 Zandi lambs, descendent of 163 sires and 1265 dams, born between 1991 and 2005 at the Zandi Sheep Breeding Station at Khojir National Park, Tehran, Iran. A derivative-free algorithm combined with a series of six single-trait linear animal models was used to estimate phenotypic variance and its direct, maternal, and residual components. In addition, bivariate analyses were done to estimate (co)variance components between traits. Estimates of direct heritability (h ² ) were 0.11, 0.15, 0.09, 0.10, 0.10, 0.10, 0.06, and 0.07 for ADGa, ADGb, ADGc, ADGd, KRa, KRb, KRc, and KRd, respectively, thereby indicating the presence of low additive genetic variation for growth rate and Kleiber ratio in this population of Zandi sheep. Maternal genetic component was found to be significant on ADGa and KRa and contributed 3% and 5%, respectively, in total phenotypic variance of ADGa and KRa. A widespread range of genetic correlations among traits studied was observed. Except for negative genetic correlations between ADGa and KRc, ADGa and KRd, and between KRa and KRc, in other cases, genetic correlations were positive and moderate to very high. Phenotypic correlations ranged from −0.49 (ADGa/KRd) to 0.94 (ADGc/KRc). These results indicate that selecting for improved growth rate or Kleiber ratio in Zandi sheep would generate a relatively slow genetic progress.     

Detecting effective starting point of genomic selection by divergent trends from best linear unbiased prediction and single-step genomic best linear unbiased prediction in pigs,beef cattle,and broilers

Genomic selection has been adopted nationally and internationally in different livestock and plant species. However, understanding whether genomic selection has been effective or not is an essential question for both industry and academia. Once genomic evaluation started being used, estimation of breeding values with pedigree best linear unbiased prediction (BLUP) became biased because this method does not consider selection using genomic information. Hence, the effective starting point of genomic selection can be detected in two possible ways including the divergence of genetic trends and Realized Mendelian sampling (RMS) trends obtained with BLUP and single-step genomic BLUP (ssGBLUP). This study aimed to find the start date of genomic selection for a set of economically important traits in three livestock species by comparing trends obtained using BLUP and ssGBLUP. Three datasets were used for this purpose: 1) a pig dataset with 117k genotypes and 1.3M animals in pedigree, 2) an Angus cattle dataset consisted of ~842k genotypes and 11.5M animals in pedigree, and 3) a purebred broiler chicken dataset included ~154k genotypes and 1.3M birds in pedigree were used. The genetic trends for pigs diverged for the genotyped animals born in 2014 for average daily gain (ADG) and backfat (BF). In beef cattle, the trends started diverging in 2009 for weaning weight (WW) and in 2016 for postweaning gain (PWG), with little divergence for birth weight (BTW). In broiler chickens, the genetic trends estimated by ssGBLUP and BLUP diverged at breeding cycle 6 for two out of the three production traits. The RMS trends for the genotyped pigs diverged for animals born in 2014, more for ADG than for BF. In beef cattle, the RMS trends started diverging in 2009 for WW and in 2016 for PWG, with a trivial trend for BTW. In broiler chickens, the RMS trends from ssGBLUP and BLUP diverged strongly for two production traits at breeding cycle 6, with a slight divergence for another trait. Divergence of the genetic trends from ssGBLUP and BLUP indicates the onset of the genomic selection. The presence of trends for RMS indicates selective genotyping, with or without the genomic selection. The onset of genomic selection and genotyping strategies agrees with industry practices across the three species. In summary, the effective start of genomic selection can be detected by the divergence between genetic and RMS trends from BLUP and ssGBLUP.     

Allelic diversity of high molecular weight glutenin subunits (HMW-GS) in Iranian Aegilops tauschii Coss. accessions by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE)

Variation of high molecular weight glutenin subunits (HMW-GS) in 28 Iranian Aegilops tauschii (2n = 2x = 14, DD) accessions studied by sodium dodecyl sulphate electrophoresis method (SDS-PAGE). The results showed high variation of HMW-GS in the accessions. The range of frequency in 14 HMW-GS combinations was 3.57–25 % in the accessions. AMOVA showed the molecular variance between the geographic areas was lower than within the geographic areas. According to Nei’s genetic diversity, the highest diversity levels were in Semnan, Golestan and Azarbayjan, on the other hand the lowest levels of diversity were found in Khorasan, Gilan and Mazandaran accessions. Hence, the Caspian Sea South East accessions also Azerbayjan in Iran have more diversity. AMOVA did not show variance between strangulata and tauschii but there was more genetic diversity in ssp. tauschii subspecies in comparison of ssp. strangulata according to Nei’s gene diversity and Shannon information index. It showed Iranian Ae. tauschii have a good potential for bread making quality improvement in bread wheat.     

Time consumption, productivity, and cost analysis of skidding in the Hyrcanian forest in Iran

The performance of the skidder Timber jack 450 C was presented in timber skidding of non-coniferous trees in hilly and mountainous conditions.An empirical time study was conducted to evaluate the current skidding system in Hyrcanian forest in northern Iran for improving production rate of skidding and finding out the production cost for planning.Based on the identified elements of skidding work phase and 130 recorded cycles,we calculated the models for effective time consumption,total productivity,and unit cost.The validity of the model was tested at 95% confidence interval.The average load volume per cycle was 2.82 m 3,average one way skidding distance was 450 m,and the average slope was 18%.The average travel speed of unloaded skidder was 5.8 km·h-1,and the average speed of loaded skidder was 0.1 km·h-1 higher than the speed of the unloaded ones.The travel speed was predominantly affected by longitudinal slopes and types of strip roads.The average speed of pulling the cable was 1.16 km·h-1,and that of load winching was 0.74 km·h-1.The average outputs in skidding was 10.6 m 3 ·h-1 and the unit cost was 12.1 US$ per hour.The time consumption and productivity of skidding depends on distances and slope,number of logs per cycle,volume,log length,etc.However,the influence of variables is not the same.