Artificial burrow preference by the Japanese crayfish Cambaroides japonicus

SUMMARY: Preference for artificial burrows by the endangered Japanese crayfish species Cambaroides japonicus was studied to improve its cultivation. The occupation of artificial burrows, which were made from straight polyvinyl chloride pipes of different internal diameters ( Y , mm), by crayfishes of different total lengths ( X , mm) was significantly ( P < 0.001, n = 56) described by a linear regression: Y = 0.49 X + 3.42 (19.0 ≤ X ≤ 70.2). Among burrows of different lengths [crayfish total length (TL) × 1, × 2, × 3, and × 4], crayfishes significantly preferred burrows that were greater than TL × 3 ( P < 0.001, n = 588).     

Colonic mast cell infiltration in rats with TNBS-induced visceral hypersensitivity

Colonic mucosal mast cells are implicated in the pathogenesis of visceral hypersensitivity associated with irritable bowel syndromes. This study was designed to investigate the roles of mucosal mast cells in development of an experimental visceral hypersensitivity induced by 2,4,6-trinitrobenzene sulfonic acid (TNBS) in rats. TNBS, when injected into the proximal colon through laparotomy, produced a significant decrease in pain threshold of the distal colon to mechanical distention, indicating a visceral hypersensitivity. In the proximal colon that was directly insulted by TNBS, mucosal necrosis and extensive inflammatory cell infiltration were observed with concomitant increase in tissue myeloperoxide (MPO) activity. In the distal colon where distention stimuli were applied, the number of mucosal mast cells significantly increased following TNBS treatment, although neither mucosal injury nor increase in tissue MPO activity was observed. In an organ culture, spontaneous release of a mucosal mast cell-specific protease (RMCP-2) from the distal colon tissue of TNBS-treated rats was significantly larger than that of sham animals. Furthermore, TNBS-induced visceral hypersensitivity was significantly suppressed by subcutaneous pretreatment with a mast cell stabilizer doxantrazole in a dose-dependent manner. These findings suggest that prominent colonic mast cell infiltration associated with an enhanced spontaneous mediator release is responsible, at least partly, for development of visceral hypersensitivity induced by TNBS in rats.     

Lactoferrin concentrations in milk from normal and subclinical mastitic cows

The concentrations of lactoferrin (Lf) in quarter milk from normal lactating cows and subclinical mastitic cows were measured to determine whether the Lf concentration in milk is influenced by the age of the cow, the stage of lactation, number of milk somatic cells and the presence of pathogens. Lf concentrations in 111 quarter milk samples from 28 normal lactating cows and 270 quarter milk samples from 198 subclinical mastitic cows were measured by means of a single radial immunodiffusion test. Lf concentrations (means +/- standard deviations; logarithmic form) in normal cows and subclinical mastitic cows were 2.23 +/- 0.39 and 2.70 +/- 0.39, respectively. The mean milk Lf concentration (log) in subclinical mastitic cows was significantly (p<0.01) higher than that in normal cows. The mean milk Lf concentration (log) in normal lactating cows aged 5 years was lower than those in normal lactating cows aged 2 years (p<0.01) and 3 years (p<0.05). The results showed that the milk Lf concentration (log) is associated with age of the dairy cow (one-way analysis of variance test, p<0.01). The mean milk Lf concentration (log) in the latter lactational period tended to be higher than those in the peak and middle periods. Milk Lf concentrations (log) tended to be proportional to the level of the somatic cell count (SCC) score. Mean milk Lf concentrations (log) in subclinical mastitic cows infected with Staphylococcus aureus and with other streptococci species were significantly (p<0.01) higher than those in cows infected with coagulase-negative staphylococci and with Corynebacterium bovis.     

Increased plasma levels of soluble intercellular adhesion molecule-1 (sICAM-1) and soluble vascular cell molecule-1 (sVCAM-1) associated with disease severity in a primate model for severe human malaria: Plasmodium coatneyi-Infected Japanese macaques (Macaca fuscata)

In the present study, we investigated plasma levels of soluble intercellular adhesion molecule-1 (sICAM-1) and vascular cell adhesion molecule-1 (sVCAM-1) in seven Japanese macaques (Macaca fuscata) infected with Plasmodium coatneyi. Concentrations of sICAM-1 and sVCAM-1 were significantly elevated in the severe phase; the levels were maximally increased up to six times and three times those before infection, respectively. We subsequently examined kinetic profiles of sICAM-1 and sVCAM-1 concentration in plasma obtained from two infected monkeys. Both infected monkeys had markedly increased levels of these adhesion molecules when they exhibited severe clinical signs correlated with rapid increase in parasitemia. These results suggest that the elevation of levels of sICAM-1 and sVCAM-1 is a critical step in the pathogenesis of severe malaria in vivo.     

Evaluation of the fire endurance of mechanically graded timber in bending

AbstractThis study examined the performance of mechanically graded timber in bending when exposed to fire at various load ratios. The test specimens were 150 pieces, each with the dimensions of 60 × 120 × 3500mm. The modulus of elasticity (MOE) of 150 specimens was measured, and 60 among them were selected to formulate the prediction equation for MOE and modulus of rupture (MOR), which was used to predict the remaining 90 specimens. These were tested under fire exposure in bending using three-point loading at 11.1%, 16.7%, 33.3%, 66.7%, and 83.3% of the ultimate load. Using mechanically graded timber, which means acknowledging the actual strength of the bending member, permits fairly precise application to the targeted design load. This research confirmed that mechanically graded timber under fire exposure has the following tendencies: under the same load ratio, time to failure is independent of strength class, and, at any load ratio, the critical strength is dependent on the timber strength class. The obtained design bending strength under fire exposure using the reduced cross section method and the reduced strength method conformed to those calculated based on Eurocode 5. Following those findings, mechanically graded timber can be applied to obtain the design bending strength when taking into account the fire attack.     

Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.     

Chemical changes in steam-pressed kenaf core binderless particleboard

The effects of chemical changes in kenaf core binderless particleboards on the bonding performance and thickness swelling of boards were investigated by chemical and spectroscopic analyses. Mild steam-injection treatments (0.6–1.0MPa) caused significant degradation of hemicelluloses, lignin, and cellulose. Conventional hot pressing caused a lower degree of degradation of the chemical components. The hot-pressed kenaf core board without any binders showed poor bonding performance. Thus, it was found that partial degradation of the three major chemical components of the kenaf core by mild steam-injection treatment increased the bonding performance and dimensional stability of the binderless boards, and gave better quality binderless boards than those made by hot-pressing treatments.Part of this report was presented at the 4th International Wood Science Symposium, Serpong, Indonesia, September 2002; and at the 53rd Annual Meeting of The Japan Wood Research Society, Fukuoka, March 2003     

Simple method for synthesizing phenolicβ-O-4 dilignols

A modified synthetic method for phenolic-O-4 lignin substructure model dimers was developed involving protection of the phenolic hydroxyl group of acetophenons with benzoyl chloride, bromination with 4-dimethylaminopyridiniumbromide perbromide, condensation with phenols in the presence of 18-crown-6-ether, condensation with paraformaldehyde, reduction with NaBH₄ and debenzoylation. This method results in shorter reaction times and increasing yields without the application of strict anhydrous and drastic conditions or chloric solvents. This alternative route could be applied to the-O-4 dilignol syntheses of four combinations of guaiacyl and syringyl derivatives.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.