Phenological and physiological evaluation of first and second cropping periods of sorghum and maize crops

Environmental conditions influence phenology and physiological processes of plants. It is common for maize and sorghum to be sown at two different periods: the first cropping (spring/summer) and the second cropping (autumn/winter). The phenological cycle of these crops varies greatly according to the planting season, and it is necessary to characterize the growth and development to facilitate the selection of the species best adapted to the environment. The aim of this study was to characterize phenological phases and physiological parameters in sorghum and maize plants as a function of environmental conditions from the first cropping and second cropping periods. Two parallel experiments were conducted with both crops. The phenological characterization was based on growth analyses (plant height, leaf area and photoassimilate partitioning) and gas exchange evaluations (net assimilation rate, stomatal conductance, transpiration and water-use efficiency). It was found that the vegetative stage (VS) for sorghum and maize plants was 7 and 21 days, respectively, longer when cultivated during the second cropping. In the first cropping, the plants were taller than in the second cropping, regardless of the crop. The stomatal conductance of sorghum plants fluctuated in the second cropping during the development period, while maize plants showed decreasing linear behaviour. Water-use efficiency in sorghum plants was higher during the second cropping compared with the first cropping. In maize plants, in the second cropping, the water-use efficiency showed a slight variation in relation to the first cropping. It was concluded that the environmental conditions as degree-days, temperature, photoperiod and pluvial precipitation influence the phenology and physiology of both crops during the first and the second cropping periods, specifically cycle duration, plant height, leaf area, net assimilation rate, stomatal conductance and water-use efficiency, indicating that both crops respond differentially to environmental changes during the growing season.     

A new standard area diagram set for assessment of severity of soybean rust improves accuracy of estimates and optimizes resource use

Soybean rust (SBR), caused by Phakopsora pachyrhizi, is the most important yield-damaging fungal disease of soybean due to severe reduction in healthy leaf area and acceleration of leaf fall. In experimental research, SBR severity is estimated visually aided/trained by a standard area diagram (SAD) developed and validated during the mid-2000s (Old SAD). In this study, we propose a new SAD set for SBR with six true-colour diagrams following linear increments (c. 15% increments) amended with four additional diagrams at low (<10%) severities, totalling 10 diagrams (0.2%, 1%, 3%, 5%, 10%, 25%, 40%, 55%, 70%, and 84%). For evaluation, 37 raters were split into two groups. Each assessed severity in a 50-image sample (0.25%–84%), first unaided and then using either the Old SAD or the New SAD. Accuracy, precision, and reliability of estimates improved significantly relative to unaided estimates only when aided by the New SAD (accuracy >0.95). Low precision (<0.78) and a trend of underestimation with an increase in severity were the main issues with the Old SAD, which did not differ from unaided estimates. Simulation to evaluate the impact of the errors by different methods on hypothesis tests, showed that the new SAD was more powerful for detecting the smallest difference in mean control (e.g., 70% vs. 65% disease reduction) than the Old SAD; the latter required a 2-fold increase in sample size to achieve the same power. There is a need to improve some SADs, taking advantage of new knowledge and technology to increase accuracy of the estimates, and to optimize both resource use efficiency and management decisions.     

Effects of thermal energy on extrusion characteristics,digestibility and palatability of a dry pet food for cats

The influence of specific thermal energy (STE) applications on extruder preconditioner was evaluated in a dry food for cats. In the first study, six STE applications were tested with mass temperatures of 45°C, 55°C, 65°C, 75°C, 85°C and 95°C. The extrusion parameters, starch gelatinization and kibble formation were evaluated. Diets were given to cats to evaluate digestibility, faecal characteristics and palatability. In the second experiment, three treatments were compared: low STE—a preconditioner temperature of 45°C (_LSTE); high STE—a preconditioner temperature of 95°C (_HSTE); high STE (preconditioner temperature of 95°C) combined with an increase in the mass flow rate to obtain a motor amperage similar to that of the _LSTE (_HSTE_flow). Data were analysed by polynomial contrasts (Experiment 1) or Tukey's test (Experiment 2; p < 0.05). An increase in STE reduced motor amperage, mass pressure and specific mechanical energy (SME) implementation (p < 0.001) and increased total specific energy (TSE) and mass temperature (p < 0.01). The increase in STE induced greater kibble expansion and starch gelatinization (p < 0.001). No changes in apparent nutrient digestibility or faeces characteristics were observed (p > 0.05). Lower STE and starch gelatinization induced higher butyrate and total volatile fatty acid (VFA) contents in faeces (p < 0.01). Cats showed greatest preference for the formulation with the highest STE (p < 0.01). In the second experiment, when the motor amperage was increased in the _HSTE_flow treatment to a value similar to that of the _LSTE, the mass flow rate increased 40%, and the electric energy consumption remained unchanged (p < 0.001), with gains observed for efficiency and cost. In conclusion, STE application is important for sufficient TSE implementation, enhancing kibble expansion, starch gelatinization, cat preferences for food, extruder productivity and reducing SME application. Foods with lower starch gelatinization lead to increased VFA in faeces, with possible implications for gut health.     

Induction of sexual activity of male creole goats in subtropical northern Mexico using long days and melatonin

The aim of this study was to determine whether the sexual activity of local male Creole goats in subtropical Mexico can be induced during the non-breeding season by a long-day treatment followed by insertion of two melatonin implants. The experiment was carried out in the Laguna region in the State of Coahuila, Mexico (26 degrees N). Fourteen male goats were allocated to two balanced groups (n = 7 each) according to body and testicular weights. Males were kept together in two separate groups and fed lucerne hay for ad libitum intake and 300 g of commercial concentrate and had free access to water and mineral blocks. The control group remained in open sheds under natural photoperiod and ambient temperature conditions. The experimental group was placed in a light-proof building and exposed to 2.5 mo of long days (16 h of light/d) from November 1 to January 15. On January 16, each male received two s.c. melatonin implants and was exposed to natural photoperiodic changes in an open shed. In the control group, testicular weight exhibited seasonal variations; the highest value occurred on May 30 (146 +/- 10 g). Treated males reached maximum testicular weight earlier (March 15; 147 +/- 11 g), and sperm quality from January to March was higher than that observed in the control group (P < 0.05). Treatment caused an increase in LH pulse frequency (2.0 +/- 0.5 vs 0.3 +/- 0.2 pulse/8 h in February, 4.6 +/- 1.1 vs 0.1 +/- 0.1 pulse/8 h in March; experimental vs control group, respectively). In the control group, plasma testosterone remained low until mid-June and increased thereafter to remain elevated until the end of the study. In the experimental group, elevated plasma testosterone was observed from February to April and from July to November. Treating male goats in subtropical latitudes with artificial long days and melatonin can induce an intense sexual activity during the natural nonbreeding season.     

Accuracy of serum beta-hydroxybutyrate measurements for the diagnosis of diabetic ketoacidosis in 116 dogs

The aim of this study was to evaluate the accuracy of serum beta-hydroxybutyrate (beta-OHB) measurements for the diagnosis of diabetic ketoacidosis (DKA) in dogs. One hundred sixteen diabetic dogs were prospectively enrolled in the study: 18 insulin-treated (IT) diabetic dogs that had a positive urine ketone test and 88 untreated, newly diagnosed diabetic dogs. Venous blood gas tensions and pH, serum glucose and urea nitrogen (SUN), and electrolyte (Na+, Cl-, and K+) and urine acetoacetate (AA) concentrations were measured concurrently with serum beta-OHB concentrations. On the basis of laboratory findings, the patients were assigned to I of 3 groups: diabetic ketoacidosis (n = 43); diabetic ketosis (DK, n = 41); and nonketotic diabetes (NDK, n = 31). Serum beta-OHB concentrations differed significantly (P < .001) among the study groups. Although marked differences in beta-OHB concentrations were found, a considerable overlap exists between the distributions of dogs with DK and those with DKA. The overall accuracy of beta-OHB determination as a diagnostic test for DKA, determined by the area under the receiver operating characteristic (ROC) curve, was 0.92. In the 1.9- to 4.8-mmol/L range, serum beta-OHB determination sensitivity varied from 100 to 35.7%, whereas specificity varied from 39 to 100%. The cutoff value of 3.8 mmol/L showed the best equilibrium between specificity (95%), sensitivity (72%), and likelihood ratio (14.8). We concluded that the quantitative measurement of serum beta-OHB may be a potential tool for diagnosing and monitoring ketosis and ketoacidosis in diabetic dogs.     

Poisoning of horses by bamboo, Bambusa vulgaris

The clinical and pathological aspects of a neurological disease observed in 16 horses in Pará, Amazonia, Brazil, are presented. The symptoms were mainly motor incoordination, paresis of the tongue, somnolence, difficulties in apprehension, chewing and swallowing of food, as well as instability and standing with abducted members. The clinical course was subacute or chronic and in most cases was not fatal. Postmortem examination performed in one already very sick, euthanized animal, did not show significant macroscopic lesions; histopathological examination revealed slight edema and degenerative alterations of a few axons, mainly in the medulla oblongata. In all pastures where horses were affected, plenty of bamboo had been eaten, probably because of scarcity of pasture. By feeding large amounts of fresh bamboo leaves of this region, in different growing stages, to three horses (horse 1, 47 g/kg/d for 30 days; horse 2, 10 g/kg/d for 60 days; horse 3, 18 g/kg on the first day, and 31 g/kg/d for 6 more days)—the animals ate the leaves unassisted—it was possible to reproduce nervous symptoms essentially identical to those observed in the natural disease 24 to 72 hours after the first feeding of the plant. In spite of continuous administration of the plant, intensity of the clinical signs did not increase. Based on field observations and comparison of the clinical and pathological pictures seen in the natural and experimental disease, the described illness can be concluded to be caused by the ingestion of large amounts of the leaves of Bambusa vulgaris f. vulgaris.     

Eco-friendly new products from enzymatically modified industrial lignins

Industrial lignins are by-products from the pulp and paper industry, as well as from other biomass-based industries. They are non-toxic, potentially of high value, inexpensive and available in large amounts. They possess highly reactive locations that can be enzymatically modified to develop new and environmentally friendly products.The oxidative enzymes produced by ligninolytic fungi are the catalysts that have mostly been used for the up-grading of these new technologies.This paper aims to provide a general picture of the variety of new and eco-friendly products that have recently been produced through enzyme-based technologies and using industrial lignins as raw materials, namely for the production of lignin-based copolymers by grafting, binders for wood composites, chelating agents, compositions for treating porous materials, coatings and paintings. In addition, it introduces fundamental aspects related to the enzymes used to modify the lignin structure to the interested readers that are not familiar with this field of research.     

Artificially regenerating longleaf pine in canopy gaps: initial survival and growth during a year of drought

Nitrogen fertilization in the nursery, along with altering the configuration of forest gaps, may improve the reforestation success of longleaf pine seedlings. During the very droughty 1998 growing season in Florida and Georgia, survival was higher under the forest canopy than in small (0.10 ha, 36 m diameter) and large (1.6 ha, 144 m diameter) canopy gaps. In the large gaps, survival of containerized seedlings was higher along the edges, particularly the SW edge. Shade from adult trees and the nurse effect of shrubs increased survival, while grass competition reduced survival. During dry years part of the “exclusionary zone” along the edge of canopy gaps (SW sector) may serve as a “survival zone”, at least in the short term. A model using oval-shaped gaps oriented from NW to SE, with an area of 0.25 ha is proposed to maximize the survival and growth of artificially regenerated longleaf pine seedlings.