Cashew nut shell liquid potentially mitigates methane emission from the feces of Thai native ruminant livestock by modifying fecal microbiota

The methane-mitigating potency of cashew nutshell liquid (CNSL) was evaluated by investigating gas production from batch cultures using feces from Thai native ruminants that had been incubated for different periods. Feces was obtained from four Thai native cattle and four swamp buffaloes reared under practical feeding conditions at the Kasetsart University farm, Thailand. Fecal slurry from the same farm was also included in the analysis. CNSL addition successfully suppressed the methane production potential of feces from both ruminants by shifting short chain fatty acid profiles towards propionate production. Methane mitigation continued for almost 150 days, although the degree of mitigation was more apparent from Day 0 to Day 30. Bacterial and archaeal community shifts with CNSL addition were observed in feces from both ruminants; specifically, Bacteroides increased, whereas Lachnospiraceae and Ruminococcaceae decreased in feces to which CNSL was added. Fecal slurry did not show marked changes in gas production with CNSL addition. The findings showed that the addition of CNSL to the feces of ruminants native to the Southeast Asian region can suppress methane emission. Because CNSL can be easily obtained as a byproduct of the local cashew industry in this region, its on-site application might be ideal.     

Effect of ovary lipid of skipjack tuna on rat serum components after stress application

Lipid extracted from the ovary of skipjack tuna by the method that we developed is rich in phospholipid-type docosahexaenoic acid. The ovary lipid of skipjack tuna (OLS) was studied for its anti-stress activity in male Wistar rats, focusing on stress-related blood components: recovery from stress was examined after application of water immersion restraint stress. As a result, serum corticosterone (CORT) secretion was inhibited and decreased rapidly after stress application in rats given OLS compared with control rats. As CORT acts as a glucocorticoid, non-esterified fatty acid (NEFA) is expected to increase by stress application. However, the concentration tended to be lower in rats given OLS than in control rats. With respect to OLS concentration, OLS increased serum dehydroepiandrosterone, secretion concentration-dependently. In addition, as with the recovery study, it tended to inhibit the increase in NEFA. These results indicate that OLS may have an anti-stress activity against acute stress.     

Erythrocyte-replaced mouse model for Haemoparasite studies: comparison of NOD/shi-scid and C.B-17/Jcl-scid mouse upon acceptability of human erythrocytes

The erythrocyte-exchanged chimera mouse model has become to be a significant tool for studying animal and human (hu) protozoan haemoparasites, though the usefulness of this model varies depending primarily on the acceptability of xenogeneic red blood cells (RBC). To find a superior recipient in comparison with C.B-17/Jcl mouse with severe combined immuno-deficiency (scid) mutation, we examined in this report the non-obese diabetes (NOD)/shi-scid mouse, a recently available strain of SCID. When 2.5 x 10(8) of fluorescent dye-labeled hu-RBCs were transfused, C.B-17scid mouse eliminated them logarithmically by a simple linear regression, while NOD-scid mouse eradicated hu-RBCs by a unique two-step fashion, i.e., a potent but only briefly functioning RBC eradication followed by a weak steadily functioning step. The means of regression line constance +/- their standard deviations (SD) of 205 C.B-17scid and of 213 NOD-scid mice for their short- and long-lasting steps were -0.73 +/- 0.63, -0.53 +/- 0.25 and -0.16 +/- 0.10, respectively. Hu-RBC half-lives determined from these means of C.B-17scid mice and of NOD-scid mice for the short- and long-living steps were 3.6, 4.9 and 16.3 hr, respectively. Higher hu-RBC acceptability of NOD-scid mouse, especially at their long-lasting step, was also demonstrated under at an activated state of mouse innate immunity. Treatment with 1.0 mg heat-killed Candida cells caused an acceleration of hu-RBC elimination in both mouse strains but the magnitudes for the short- and long-living steps of NOD-scid mice evaluated by "stimulation index" were only 1/2.6 and 1/7.6 of C.B-17scid mice, respectively.     

Automatic detection of washboarding in bandsaws

This paper presents an on-line method for detecting washboarding generated in bandsaws. It uses a parameter based on the shape of sawing force amplitude distributions. The curve of the probability density function of the parallel sawing force amplitude obeyed a normal distribution for the normal sawn surface, but it changed to an M-shaped distribution when washboarding appeared on the sawn surface of the workpiece. The curve of probability density function of the normal sawing force amplitude obeyed the normal distribution for any sawn surface investigated. The workpiece including a knot did not influence use of the parameter for detecting the appearance of washboarding.     

High-speed steel tool wear during wood cutting in the presence of high-temperature corrosion and mineral contamination

Dulling of high-speed steel (HSS) cutting tools after milling five wood species has been analyzed. The wood investigated varied in mineral contamination, high-temperature corrosivity (HTC) and density (D). Experiments performed proved that up to date methods for evaluation of mineral contamination in wood should be improved. A new pipe-like form of mineral contamination particles was evidenced. The correlation between the presence of 3D aggregates of silica in wood and high content of K and Ca in the ash was established. Employing multivariable theoretical simulation method, the combined effect of mineral contamination, HTC and wood density on the tool dullness appeared to be a reasonable explanation of the results obtained.     

Mathematical Simulation of Small Log Ripped by Slasher Saw

Withthesmallsawlogwidespreadused,theuncut-boardsandslabsarecutbythemulti-bitrippingedgerinthejhoberindustw.AfersawingripPed,theunedgedboedaccuratelyvolumeisfAnotherparametCrsaredefinitebyadrawing,theaPProimatevolumeforn1ulateofunedgedboardistx,y,~inatC,x'…     

Locating and identifying sound knots and dead knots on sugi by the rule-based color vision system

Knowledge of the occurrence of sound and dead knots on the surface of sugi is important for the classification and application of the material. This study examined a color vision system for detecting sound and dead knots on sugi. The system can be conceptually divided into three components: a CCD-camera scanning system, an image-segmenting module, and a rule-based defect identifying module. The results showed that the potential defect regions could be located by Otsus threshold algorithm in conjunction with t-test analysis. The accuracies of locating sound knots and dead knots were 92.6% and 97.1%, respectively. The rule-based approach was used to identify sound and dead knots and the identifying accuracies for sound knots and dead knots were 92.0% and 94.1%, respectively. The overall detection accuracy of the system was 87.6%. The results indicated that the rule-based color vision system is an efficient means of detecting sound knots and dead knots on sugi.     

Effect of tool angles on the chips generated during milling of wood by straight router-bits

 The effect of tool angles on the shapes of chips generated by parallel-to-grain and end-grain milling was explored for China fir and maple under fixed spindle and feed speeds and cutting depth. The milling path was up-milling by straight router-bits with a diameter of 12 mm. The chip shapes could be distinguished as five types: spiral, splinter, flow, thin, and granules or powder. The flow and thin chips were generated most often (on a weight percentage basis) for all tool angles investigated for parallel-to-grain and end-grain milling of China fir and maple. More granule chips were produced with parallel-to-grain milling than with end-grain milling for both woods. The measured chip thickness (t′) was thicker than the calculated thickness (t _max). Thicker and longer maple chips were produced by end-grain milling than by parallel-to-grain milling. The tool geometries of 40°/15° (sharpness of the angle–rake angle), 50°/15°, and 60°/15° for China fir and 40°/25°, 50°/5°, and 60°/5° for maple produced relatively more flow chips with parallel-to-grain milling. Furthermore, the tool geometries of 40°/5°, 50°/15° and 60°/25° produced more flow chips (weight percentage) by end-grain milling of China fir and maple. Received: May 23, 2001 / Accepted: June 28, 2002 Acknowledgment This study was supported by a grant from the National Council of Science, Taiwan (NSC89-2313-B-415-011).     

Rates of chemical weathering of porous rhyolites: 5-year measurements using the weight-loss method

To examine the rate of chemical weathering, field experiments using microweight-loss techniques were carried out. Two kinds of porous rhyolite forming lava domes in Kozu-shima Island were selected: (1) a younger rock (weathering period is 2.6 ka) and (2) an older rock (20 ka). Both rocks seem to have been very similar in their initial composition and structure. They have, however, different properties in the present depending on the difference in weathering period. Rock tablets of these rhyolites with a diameter of 3.5 cm and a thickness of about 1 cm were enclosed in a nylon mesh bag and placed in a soil–bedrock interface on a hillslope of central Japan for over 5 years. The younger rock has a lower weight loss by about 0.5%, and the older rock has a higher weight loss of 3% to 5%. These results show that older rock has a higher rate of chemical weathering than in younger rock. This supports Oguchi et al.'s (Oguchi, T.C., Hatta, T., Matsukura, Y., 1994. Changes in rock properties of porous rhyolite through 40,000 years in Kozu-shima Island, Japan. Geogr. Rev. Jpn. 67A, 775–793 (in Japanese, with English Abstr.); Oguchi, T.C., Hatta, T., Matsukura, Y., 1999. Weathering rates over 40,000 years based on changes in rock properties of porous rhyolite. Phys. Chem. Earth (A) 24, 861–870.) finding that the rate of change in chemical properties appears to accelerate with weathering time.