Cashew nut shell liquid potentially mitigates methane emission from the feces of Thai native ruminant livestock by modifying fecal microbiota

The methane-mitigating potency of cashew nutshell liquid (CNSL) was evaluated by investigating gas production from batch cultures using feces from Thai native ruminants that had been incubated for different periods. Feces was obtained from four Thai native cattle and four swamp buffaloes reared under practical feeding conditions at the Kasetsart University farm, Thailand. Fecal slurry from the same farm was also included in the analysis. CNSL addition successfully suppressed the methane production potential of feces from both ruminants by shifting short chain fatty acid profiles towards propionate production. Methane mitigation continued for almost 150 days, although the degree of mitigation was more apparent from Day 0 to Day 30. Bacterial and archaeal community shifts with CNSL addition were observed in feces from both ruminants; specifically, Bacteroides increased, whereas Lachnospiraceae and Ruminococcaceae decreased in feces to which CNSL was added. Fecal slurry did not show marked changes in gas production with CNSL addition. The findings showed that the addition of CNSL to the feces of ruminants native to the Southeast Asian region can suppress methane emission. Because CNSL can be easily obtained as a byproduct of the local cashew industry in this region, its on-site application might be ideal.     

Effect of ovary lipid of skipjack tuna on rat serum components after stress application

Lipid extracted from the ovary of skipjack tuna by the method that we developed is rich in phospholipid-type docosahexaenoic acid. The ovary lipid of skipjack tuna (OLS) was studied for its anti-stress activity in male Wistar rats, focusing on stress-related blood components: recovery from stress was examined after application of water immersion restraint stress. As a result, serum corticosterone (CORT) secretion was inhibited and decreased rapidly after stress application in rats given OLS compared with control rats. As CORT acts as a glucocorticoid, non-esterified fatty acid (NEFA) is expected to increase by stress application. However, the concentration tended to be lower in rats given OLS than in control rats. With respect to OLS concentration, OLS increased serum dehydroepiandrosterone, secretion concentration-dependently. In addition, as with the recovery study, it tended to inhibit the increase in NEFA. These results indicate that OLS may have an anti-stress activity against acute stress.     

Erythrocyte-replaced mouse model for Haemoparasite studies: comparison of NOD/shi-scid and C.B-17/Jcl-scid mouse upon acceptability of human erythrocytes

The erythrocyte-exchanged chimera mouse model has become to be a significant tool for studying animal and human (hu) protozoan haemoparasites, though the usefulness of this model varies depending primarily on the acceptability of xenogeneic red blood cells (RBC). To find a superior recipient in comparison with C.B-17/Jcl mouse with severe combined immuno-deficiency (scid) mutation, we examined in this report the non-obese diabetes (NOD)/shi-scid mouse, a recently available strain of SCID. When 2.5 x 10(8) of fluorescent dye-labeled hu-RBCs were transfused, C.B-17scid mouse eliminated them logarithmically by a simple linear regression, while NOD-scid mouse eradicated hu-RBCs by a unique two-step fashion, i.e., a potent but only briefly functioning RBC eradication followed by a weak steadily functioning step. The means of regression line constance +/- their standard deviations (SD) of 205 C.B-17scid and of 213 NOD-scid mice for their short- and long-lasting steps were -0.73 +/- 0.63, -0.53 +/- 0.25 and -0.16 +/- 0.10, respectively. Hu-RBC half-lives determined from these means of C.B-17scid mice and of NOD-scid mice for the short- and long-living steps were 3.6, 4.9 and 16.3 hr, respectively. Higher hu-RBC acceptability of NOD-scid mouse, especially at their long-lasting step, was also demonstrated under at an activated state of mouse innate immunity. Treatment with 1.0 mg heat-killed Candida cells caused an acceleration of hu-RBC elimination in both mouse strains but the magnitudes for the short- and long-living steps of NOD-scid mice evaluated by "stimulation index" were only 1/2.6 and 1/7.6 of C.B-17scid mice, respectively.     

Establishment of a potency test by ELISA for a rabies vaccine for animal use in Japan

The ELISA we developed was able to determine the antigen content and was suitable for a potency test, and we described a relative potency assay method which determines the potency of test vaccines by comparing the ELISA value of a test vaccine to that of a reference vaccine. In the present study, we standardized the reference vaccine used for determining the potencies of test vaccines, and established a potency test by ELISA. We evaluated the proposed reference vaccine by the neutralizing antibody responses in dogs after vaccination, by the challenge protection test in guinea pigs (GP potency test), which is the earlier official potency test used in Japan, and by the NIH potency test, which is widely used throughout the world. The results showed that a 4-fold dilution of the proposed reference vaccine induced sufficient immunity in dogs. A 3-fold dilution of the proposed reference vaccine passed the GP potency test. The international units (IU) calibrated by the NIH potency test were 3.7 IU/dose. From the results and the WHO recommendation that veterinary rabies vaccines should have a potency of at least 1.0 IU/dose, we determined to dilute the proposed reference vaccine by 3 fold and regarded it as the reference vaccine. Finally, we confirmed that there is a good agreement between the results of the potency test by ELISA and the results of the GP potency test. The establishment of the potency test by ELISA has made it possible to monitor the potency in the production process and has contributed to the stable production of the vaccine.     

Survey on wild rodents for endoparasites in Iwate Prefecture, Japan

Wild rodents (58 Apodemus speciosus, 29 A. argenteus and 7 Microtus montebelli) were surveyed for endoparasites in Iwate Prefecture, Japan, from October to December 1995 and from April to October 1996. Two trematodes (Echinostoma macrorchis, Plagiorchis muris), 4 or more cestodes (Hymenolepis diminuta, Raillietina coreensis, Cladothyridium spp., Cysticercus fasciolaris), 12 nematodes (Carolinensis minutus, Eucoleus sp., Heligmosomoides kurilensis, H. protobullosus, H. speciosus, Heterakis spumosa, Rhabditis (Pelodera) orbitalis, Rictularia cristata, Syphacia emileromani, S. frederici, S. montana, Trichuris sp.) and 3 protozoans (Giardia sp., Trichomonas sp., Trypanosoma sp.) were identified. The two species of Apodemus were similar to each other, but they were extremely different from M. montebelli in parasite fauna.     

Cross-sectional cutting of bamboo with a pair of shearing blades for bamboo cube production

As a new use of bamboo, bamboo cubes may be useful as a shot-blast material for surface treatments. However, a suitable processing technique for bamboo cubes has not been established. In this study, to obtain basic knowledge regarding the processing technology for bamboo cubes, we installed shearing blades (upper and lower blades) in a universal testing machine to test cross-sectional shearing of bamboo. The shearing force generated in this shearing was composed of a vertical component (F _v), a forward component (F _f), and a side component (F _s). This shearing force (F _v, F _f, and F _s) and the machining accuracy were investigated under various processing conditions. The shearing force became larger as the thickness of bamboo increased. In particular, F _v showed a tendency to increase rapidly. Changes in the shear angle of the upper blade had a remarkable influence on F _v. This result suggests that the shearing force could be greatly decreased by adjusting the shear angle. The shearing force within bamboo of 3mm in thickness was almost unaffected by the blade angle, and the change of shearing force with increasing clearance was almost indiscernible. It was clearly demonstrated that a large number of bamboo cubes could be made when the shear angle was large and cross-sectional shearing was performed from the bark side. However, a consequence of a large shear angle is that burr area increases. Part of this article was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, March 2003     

First report of trunk rot caused by <Emphasis Type="Italic">Fomitiporia torreyae</Emphasis> in Kyoto prefecture on cultivars of Japanese cedar with no relatedness to ‘Sanbu-sugi’

Trunk rot, caused by Fomitiporia torreyae, is one of the most economically important sap rot diseases on Cryptomeria japonica, especially on a cutting cultivar ‘Sanbu-sugi’. This disease had been reported only from Chiba and Ibaraki prefectures in Japan; however, a similar trunk rot on Japanese cedars was found recently in Kyoto prefecture. We identified the causal agent of the trunk rot on Japanese cedars in Kyoto prefecture, clarified the genotype of ‘Sanbu-sugi’ (sensu stricto) using microsatellite markers, and then investigated the relatedness of these infected cedars with ‘Sanbu-sugi’. The pathogen was identified as F. torreyae by its DNA sequences and morphological characteristics of the fruiting body. The 25 ramets of ‘Sanbu-sugi’ had only one genotype based on eight microsatellite loci. Infected Japanese cedars in Kyoto were comprised of different genotypes and showed no close relatedness to ‘Sanbu-sugi’. This is the first report of trunk rot caused by F. torreyae on cultivars of Japanese cedar with no relatedness to ‘Sanbu-sugi’ outside of Chiba and Ibaraki prefectures and showed the potential for expansion of this disease to Japanese cedar plantations in other areas.     

Automatic detection of washboarding in bandsaws

This paper presents an on-line method for detecting washboarding generated in bandsaws. It uses a parameter based on the shape of sawing force amplitude distributions. The curve of the probability density function of the parallel sawing force amplitude obeyed a normal distribution for the normal sawn surface, but it changed to an M-shaped distribution when washboarding appeared on the sawn surface of the workpiece. The curve of probability density function of the normal sawing force amplitude obeyed the normal distribution for any sawn surface investigated. The workpiece including a knot did not influence use of the parameter for detecting the appearance of washboarding.     

High-speed steel tool wear during wood cutting in the presence of high-temperature corrosion and mineral contamination

Dulling of high-speed steel (HSS) cutting tools after milling five wood species has been analyzed. The wood investigated varied in mineral contamination, high-temperature corrosivity (HTC) and density (D). Experiments performed proved that up to date methods for evaluation of mineral contamination in wood should be improved. A new pipe-like form of mineral contamination particles was evidenced. The correlation between the presence of 3D aggregates of silica in wood and high content of K and Ca in the ash was established. Employing multivariable theoretical simulation method, the combined effect of mineral contamination, HTC and wood density on the tool dullness appeared to be a reasonable explanation of the results obtained.     

Mathematical Simulation of Small Log Ripped by Slasher Saw

Withthesmallsawlogwidespreadused,theuncut-boardsandslabsarecutbythemulti-bitrippingedgerinthejhoberindustw.AfersawingripPed,theunedgedboedaccuratelyvolumeisfAnotherparametCrsaredefinitebyadrawing,theaPProimatevolumeforn1ulateofunedgedboardistx,y,~inatC,x'…