An evaluation of the Olsen test as a measure of plant-available phosphorus in grassland soils derived from basalt parent material

Abstract. Anecdotal and circumstantial evidence have suggested that the Olsen test underestimates plant-available phosphorus (P) in basaltic soils in Northern Ireland. Therefore, the ability of this test to predict plant-available P in basaltic (and non-basaltic) soils was investigated by regressing Olsen-P data against herbage P indices calculated from plant tissue test data using the diagnosis and recommendation integrated system. The average Olsen-P concentration for a range of fields situated on basaltic soils was considerably lower than the average Olsen-P concentration for a range of fields situated on non-basaltic soils, and yet mean sward P status, as given by the herbage P indices, was similar for both groups of fields. Herbage P indices were also much better correlated with Olsen-P measurements in non-basaltic soils than in basaltic soils. Furthermore, at low Olsen-P values (≶9mgPL⁻¹) some swards on basaltic soils were genuinely deficient in P, while others were sufficient or even in surplus for this nutrient. The results confirm that Olsen-P is inadequate as a predictor of plant-available P in basaltic soils. It is concluded that an alternative soil test is needed to provide a reliable assessment of plant-available P in basaltic soils, to prevent overuse of fertilizer and manure P and to minimize the amounts of P entering local watercourses.     

COMPUTED TOMOGRAPHY-GUIDED PERCUTANEOUS BIOPSY: CRITERIA FOR ACCURATE NEEDLE TIP IDENTIFICATION

Precise localization of the needle tip during CT-guided percutaneous biopsy is considered to be a key element of a successful procedure. To ensure accuracy, the true needle tip must be differentiated from a false or simulated tip which appears when the CT slice encompasses only the shaft of an angled needle. By obtaining images of an aspiration biopsy needle inserted vertically into a phantom and then incrementally tilting the gantry, the authors were able to compare the characteristic features of the true tip to the simulated tip. The true tip was abrupt and distinct and had an adjacent flame-like low density artifact. The simulated tip was indistinct and tapered, yet still produced the adjacent artifact. We concluded that the shape and distinctness of the end portion of the needle itself, rather than the attendant artifact, were the most reliable criteria for accurate needle tip identification.     

Analysis and pharmacokinetics of cimaterol in growing Holstein steers.

Pharmacokinetic parameters for the beta 2-adrenergic agonist, cimaterol (CIM), were determined in growing Holstein steers. Compartmental analysis was used after measurement of CIM in body fluids by affinity chromatography and HPLC using UV detection. Recoveries from spiked plasma and urine standards were 70 +/- 1.2% and 68 +/- 1.1%, respectively. The minimum detection level in plasma was 1 ng/mL and the average CV was 5.1% for concentrations that ranged from 1 to 30 ng/mL. Four steers (276 +/- 24 kg) received 15 mg of CIM by bolus intravenous injection. Plasma CIM levels declined in a biphasic manner with half-lives of 2.5 min for the distribution phase and 54 min for the elimination phase. A two-compartment open model was used to describe the disappearance of CIM and the following pharmacokinetic parameters were obtained: central compartment volume (Vc) = .76 L/kg, apparent volume of distribution (Vd) = 4.1 L/kg, and transfer rate constants from the central to peripheral compartment (k12) = .177/min, from the peripheral to central compartment (k21) = .054/min and elimination from the central compartment (kel) = .074/min. After 8 h, total urinary CIM accounted for only 18.3% of the administered dose. Results suggest that circulating concentrations of CIM in growing steers are influenced by its accumulation in an unidentified peripheral pool and its conversion into unknown metabolite(s) before elimination.     

Canine distal renal tubular acidosis and urolithiasis

Distal RTA is characterized by decreased distal renal tubular hydrogen ion secretion, decreased ability to acidify urine, hypercalciuria, hyperphosphaturia, hypocitraturia, and metabolic acidosis. Because of the resulting alterations in urine composition and pH, patients with distal RTA are predisposed to urolithiasis and renal calcification. Diagnosis of distal RTA is important because it is a potentially reversible disorder that, left untreated, may cause nephrocalcinosis, recurrent urolith formation, moderate to severe metabolic acidosis, and renal failure.     

Transesophageal monitoring of aortic blood flow during nonemergent canine surgeries

Objective: To establish baseline values for descending thoracic aortic blood flow parameters as determined with a transesophageal combined M‐mode and pulsed Doppler ultrasound‐based monitoring method. Design: Preliminary observational study. Setting: University small animal teaching hospital. Animals: The study population consisted of anesthetized canine patients undergoing nonemergent surgeries. Prospectively set criteria for inclusion were adequate body size for placement of the esophageal probe and a nonemergent reason for surgery. The criterion for exclusion was recent trauma. Interventions: Placement of the transesophageal probe. Measurements and main results: Data was collected during 15 surgeries. Data from three dogs was excluded from data analysis (two recently hit by motor vehicles, one recently having undergone a total hip replacement). Each parameter was stable across time within each individual dog. The ranges of the descending thoracic aortic parameters across the 12 nonemergent cases were as follows: blood flow, 0.038–0.085 L min^?1 kg^?1; blood flow per beat, 0.31–0.84 mL kg^?1; blood acceleration, 6–29 m s^2?1; blood peak velocity, 38–105 m s^?1; left ventricular ejection time interval 331–492 ms; and diameter, 0.30–0.93 mm kg^?1. Conclusions: The range of descending thoracic aortic blood flow parameters encountered in this small group of dogs during nonemergent surgeries was broad; however, each parameter was quite stable across time with little change occurring in any dog during monitoring.     

Dual-Energy X-Ray Absorptiometry and Force-Plate Analysis of Gait in Dogs With Healed Femora After Leg-Lengthening Plate Fixation

Dual-energy x-ray absorptiometry was used to measure bone mineral density of four regions in healed femora of nine dogs after fracture fixation with a leg-lengthening plate. Six to 85 months (mean, 46 months) after surgery, the bone mineral density of healed femora was not significantly different from the contralateral uninjured femora ( P >.05; power = 0.8 at Δ= 15%). Radio-lucencies around the proximal screws, apparently associated with screw loosening, were seen on radiographic views of the healed femora of three dogs. In one of these dogs, one screw in the proximal metaphysis had broken. Force-plate analysis of gait was also performed on dogs at the time of bone mineral density measurement. Peak vertical force was decreased in the pelvic limb with the healed fracture compared with the contralateral unoperated limb ( P < 0.05). Clinically apparent lameness in three dogs did not appear to be associated with altered bone mineral density and may have been caused by hip osteoarthritis, a nondisplaced hairline diaphyseal fracture, and screw loosening in conjunction with extensive post-traumatic soft tissue injury.     

Use of 64Copper Measurements to Diagnose Canine Copper Toxicosis

Inherited canine copper toxicosis is a serious problem in Bedlington terriers and West Highland White terriers, and may also be a problem in other less-studied breeds. Affected dogs become ill at midlife with progressive and ultimately fatal liver disease. Treatments for removal of copper and prevention of copper accumulation are available, but are most effective if begun before the dog becomes ill. Until recently diagnosis has not been available until the dog is 1 year of age, and then only by an invasive liver biopsy with determination of liver copper concentration. The authors studied the use of 64copper for early diagnosis of canine copper toxicosis. Two procedures were evaluated. The first involved measuring the concentration of 64copper in blood 24 hours after oral administration of the radioisotope. At this time, 64copper was associated primarily with ceruloplasmin secreted into the blood by the liver. This procedure is useful in the diagnosis of the human counterpart, Wilson's disease. However, the authors found it to be nondiscriminatory between affected and unaffected dogs. In contrast, the second procedure, which involved measuring 64copper excreted in stool during 48 hours after an intravenous dose of radioisotope, yielded results that differentiated most affected and unaffected dogs.     

Characteristics of Salmonella isolated from an outbreak of equine salmonellosis in a veterinary teaching hospital

During an outbreak of equine salmonellosis in a veterinary teaching hospital 20 Salmonella isolates were cultured from sick horses (13 isolates) or from the hospital environment (7 isolates). Three serotypes were isolated from the environment including: S. give, S. newportand S. agona. The serotypes isolated from horses included: S. give, S. newport and S. anatum. Examination of antibiotic profiles, presence of plasmids, production of bacteriocins and hemagglutination of erythrocytes implied a common origin for the equine and environmental isolates.     

Accuracy of the thermodilution method in estimating high flow - an in vitro study

The accuracy of thermodilution for measuring flow rates of 10–40 L/min was evaluated using a commercially available thermodilution cardiac output computer in an in vitro model. Water (36.5–37.5°C) was directed through a mixing chamber via a constant flow pump. Thermodilution estimates of flow using four different volumes (10, 20, 30, 40 ml) of iced water injectate were compared to simultaneous measurements of timed samples of effluent from the mixing chamber. Injectate volume had a significant impact on the accuracy of thermodilution estimation (p < 0.05). Thermodilution overestimated measured flow when 10 and 20 ml of injectate were used to determine flow rates < 20 L/min but underestimated flow when injectate volumes of 30 and 40 ml were used, or when measured flow was > 25 L/min. The discrepancy between thermodilution flow and measured flow increased as rate of fluid flow increased.     

Performance Evaluation of the ADS 1000 Ventilator Using a Lung Model

A laboratory evaluation was performed to evaluate the performance characteristics of a new veterinary ventilator. The ventilator studied was configured according to manufacturer's directions and attached to a test lung via a pneumotachograph and differential pressure transducer interfaced to a pulmonary mechanics analyzer system. Constant resistance (R=10 cm H₂O/L/sec) and compliance (C=3 ml/cm H₂O) factors were maintained for all trials. The ventilator operated at the manufacturer's preprogrammed parameters. In the first trial, body weight was the only variable. In the second trial, an endotracheal tube was placed in series between the ventilator's breathing circuit and the pneumotachograph. Body weights from 1–20 kgs were evaluated. Mean values for respiratory rate (RR), minute ventilation (VE), inspiratory time (Ti), peak inspiratory pressure (PIP), and peak inspiratory flow (Fpki) displayed on the ventilator control panel; tidal volume (VT), calculated from the displayed minute volume, and identical parameters measured by the pulmonary mechanics system at each body weight, were compared using a two factor analysis of variance. Significant differences (P< 0.05) were found between mean displayed and measured values for RR, PIP, and Fpki.