Determination of Energy Input-Output Analysis in Plum (<Emphasis Type="Italic">Prunus domestica</Emphasis> L.) Production

The aim of this research is to compose the energy input-output analysis of plum in Nevsehir province in Turkey. This research was conducted at the plum cultivating facilities during the 2015–2016 production seasons in Nevsehir province of Central Anatolian Region in Turkey. The agricultural input energies and output energies used in plum cultivation were calculated to determine the energy input-output analysis. According to the research findings, the energy inputs in plum cultivation were calculated respectively 3920?MJ ha^?1 (44.99%) chemical fertilizers energy, 1618.91?MJ ha^?1 (18.58%) diesel fuel energy, 1125.85?MJ ha^?1 (12.92%) chemicals energy, 1069.20?MJ ha^?1 (12.27%) machinery energy, 723.24?MJ ha^?1 (8.30%) human labour energy and 255?MJ ha^?1 (2.93%) irrigation water energy. Production output plum yield were calculated as 12,112.50?MJ ha^?1. The energy output/input ratio, specific energy, energy usage efficiency and net energy calculations were calculated respectively as 1.39, 1.37?MJ kg^?1, 0.73?kg MJ^?1 and 3400.30?MJ ha^?1.     

Removal of Phosphate from Waste Waters by Adsorption

In this study, the adsorption of phosphate on gas concrete from aqueous solutions has been studied as functions of temperature, mixing rates and suspension pH. Over 99% of phosphate removal was found. The chemical composition of the gas concrete has been defined by X-ray analysis. Experimental data was fitted to the Langmuir equation in order to Langmuir coefficients. After calculating Langmuir coefficients, adsorption free energy (Δ G ⁰ _ads.) has been determined. In order to gather information about adsorption mechanism, electrophoretic mobilites of particles were measured at various pHs by using Zeta meter 3.0+. It has been found that the adsorption is driven by the interactions between the ionizations of CaO and Al₂O₃ and the formation of AlPO₄. According to the BET (N₂) measurements, the specific surface area of gas concrete was found as 22 m²g^-1. The surface area after adsorption has been found as 17 m²g^-1. The surface area covered by adsorbate has been found as 5.23 m²g^-1 by usinga_s = n^s _m. a_m. N_A. These two areas determined by BET and Langmuir model were close to each other (BET: 22 m²g^-1–17 m²g^-1).     

Antibacterial properties of silk fibroin/chitosan blend films loaded with plant extract

The silk fibroin (SF)/chitosan (CHI) blend films were prepared by dissolving them in formic acid. The morphology of the films was examined by scanning electron microscopy (SEM). The roughness of the membranes was determined by atomic force microscopy (AFM). These films were treated with the extracts of Pistacia terebinthus, Pistacia lentiscus, and Hypericum empetrifolium. Folin-Ciocalteu assay was used to determine the amount of total phenols adsorbed on these blend films. The antibacterial properties of films were tested using disc diffusion and turbidity measurement methods against Escherichia coli and Staphylococcus epidermidis. The release of adsorbed phenolics from the film surface resulted in antibacterial properties.     

Analysis and tensile characterization of air-entangled textured polyester woven fabrics depending on interlacement and yarn sets

The aim of this study was to understand the failure mechanism of two dimensional dry fabric structure considering yarn sets and interlacements. For this purpose, data generated on air-entangled textured polyester woven fabric under the simple tensile load and analyzed by developed regression model. The regression model showed that warp and weft directional tensile strengths of satin fabric were higher than those of plain and rib fabrics in unravel sample. This might be related to the number of interlacements of the fabrics. There was not a considerable difference between warp directional tensile strength of ravel and unravel satin fabrics, whereas weft directional tensile strength of ravel satin fabric decreased rapidly with respect to its unravel form. The satin fabric showed the highest warp directional tensile strength among the others. The lowest weft directional tensile strength was received from ribs fabric. In semi-ravel sample, all fabrics showed low warp and weft directional tensile strength values except in plain fabric. Warp directional tensile elongation of plain fabric was the highest in unravel sample. Satin fabric showed the highest warp directional tensile elongation in the ravel sample. Warp directional tensile elongations of all the fabrics in the semi-ravel sample became low. Weft directional tensile elongation of satin fabric was the highest in unravel sample. In addition, satin and plain fabrics showed the highest weft directional tensile elongations in the ravel sample. Weft directional tensile elongations of all the fabrics in the semi-ravel sample became low except in ribs fabric.     

Prevalence and economic significance of bovine hypodermosis in Afyonkarahisar province of Turkey

This study was carried out to investigate the prevalence and economic losses due to in cattle of hypodermosis between May 2008 and April 2009 in Afyonkarahisar province of Turkey. A total of 6,598 cattle—3,498 in pasture and 3,100 in slaughterhouse—were examined for hypodermosis. One hundred ninety-five out of 6,598 cattle (2.96%) were found positive. Concerning this infestation rate, the prevalence of hypodermosis in field was 5.3%, whereas the prevalence was 0.3% in slaughter house. Hypoderma bovis and Hypoderma lineatum were recorded in slaughter house. First-stage Hypoderma spp. larvae weren’t found in cattle organs in slaughterhouse. The annual economic loss on skins is estimated to be about 18,288 TL (currency exchange rate is 1 USD:1.499 TL).     

Effects of land-use and management practices on soil ergosterol content in andosols

Ergosterol is a fungus-specific chemical component which has been extensively used to assess the fungal biomass and activity in soils. In the present study, we investigated the soil ergosterol content in a group of Japanese soils differing in management. In addition, the relationships among the soil ergosterol content (SEC), microbial biomass C (MBC), and microbial biomass N (MBN) were also tested in different seasons. Our results showed that the SEC was lower in intensively cropped soils than in pasture and forest soils. In general, no consistent trend was observed for SEC of pasture soils within the same sampling period. However, SEC tended to decrease in most of the soils in autumn, which may be ascribed to the effect of seasonal changes on fungal biomass. No strong evidence could be obtained for the effect of different fertilizers on SEC, which can be due to different management variables and interspecific variations between fungal communities at different soil sites. Our results did not suggest the presence of a noticeable correlation between SEC and MBC or MBN. The ratio of SEC in total biomass C was lower (0.20 and 0.11% in spring and autumn, respectively) compared with the values reported.     

Effects of sample dimensions on pull-out properties of woven fabric structures

The aim of this study was to understand the effects of fabric sample dimensions on pull-out properties of fabric weaves. Polyester woven fabrics were used to conduct the pull-out tests. A yarn pull-out fixture was developed and data generated from this research. Yarn pull-out forces depend on sample dimensions, fabric density, fabric weave, and number of pulled ends in the fabric. Results showed that multiple and single yarn pull-out forces of long samples were higher than those of short samples, and the multiple yarn pull-out force was higher than that of the single yarn pull-out force, and dense fabric has high pull-out force. Plain fabric weave showed high single and multiple pull-out forces compared to ribs and satin fabric weaves. The regression model could be used in this study as a viable and reliable tool. This research could be valuable for development of multifunctional fabrics in technical textile applications.     

Piezoelectric behavior of wood under combined compression and vibration stresses I: Relation between piezoelectric voltage and microscopic deformation of a Sitka spruce (Picea sitchensis Carr.)

This study investigated the relation between piezoelectric behavior and the deformation of trachieds in real time under combined compression and vibration stresses. Scanning electron microscope images were recorded directly into a video recorder. Two types of microscopic destruction were observed in the specimens. With the first type, although a small uprush around the boundary of the annual ring was observed, the specimens were broken only by shearing fracture in the 45° direction. With the second type, the specimens were finally broken by shearing fracture after repeated buckling. In these cases the piezoelectric voltage increased almost linearly in the elastic region, proceeded to the maximal point, and then decreased gradually. Finally a clear peak appeared in the buckling and shearing fracture. There is a curved relation between the specific gravity and the piezoelectric parameter when the influence of voids is considered, and there is a linear relation between the dynamic Young's modulus and the piezoelectric parameter when the stress is considered.Part of this paper was presented at the 46th annual meeting of the Japan Wood Research Society in Kumamoto, April 1996