Analysis of mesh breaking loads in cotton gill nets: Possible solution to ghost fishing

ABSTRACT:   A small number of fishers in Chiba Prefecture of eastern Japan use cotton gill nets to catch Japanese spiny lobster Panulirus japonicus. To examine the advantages of cotton gill nets, we analyzed changes in mesh breaking load of a new cotton gill net used in a fishing operation. A new cotton gill net was also soaked in a seawater tank to simulate ghost fishing conditions. The average mesh breaking load of new cotton mesh was 50.3 N. This value decreased to 19.0 N after 38 days (∼912 h), and after 82 days (∼1968 h) the mesh could be easily torn (breaking load 0.07 N). Under fishing conditions, the cumulative soak time was only 744.4 h over 19 months. The average breaking load at the end of this period was 43.1 N, a strength 86% that of the presoaked mesh. The mesh breaking load of a cotton gill net continuously soaked for 744.4 h was 26.1 N, as estimated from tank experiment data. Thus, a cotton gill net maintains reasonable strength under typical use conditions, but will degrade if lost at sea.     

Influence of overplanting paddy rice on irrigation water delivery performance: a case study in the Dakalt branch canal,Nile Delta of Egypt

In the North Nile Delta of Egypt, the impacts of overplanting paddy rice on water delivery performance have not been discussed quantitatively. Further, the amount of water that could have been saved if farmers would follow the planned area is unknown. In this study, water delivery performance was assessed by comparison of actual paddy rice planting and the government’s planned conditions. For both conditions, performance indicators relating to adequacy, equity, and dependability were analyzed across six locations in conjunction with the branch canal water level in 2013 and 2014. Based on the difference between the actual water supply and planned water demand, the amount of water that could have been saved for downstream uses was calculated. The average adequacy for the investigation period was good at one location, fair at 2 locations, and poor at 3 locations in both years. Further, adequacy under both actual and planned conditions was poor in late July at all locations. The planned adequacy and dependability downstream and equity among locations improved compared to the actual condition in both years. Under the condition that paddy rice area is the upper limit planned by the government, about 12.3% and 9.6% of water could be potentially saved in each year. The difference between actual and planned water delivery performance is caused by the branch canal’s low water level. Control of overplanting paddy rice and coordination of water distribution among water user associations would improve stable water level in the canal and, eventually, water delivery performance.

     

Suitable inflow rate and furrow length for simplified surge flow irrigation

Paddy and Water Environment - In the arid lands covering Uzbekistan, furrow irrigation with low application efficiency is still widely used due to a lack of funds and shortage of labor. To save...     

Improvement in recruitment of Japanese sardine with delays of the spring phytoplankton bloom in the Sea of Japan

To evaluate the impact of temporal variation of primary productivity on the recruitment of Japanese sardine (Sardinops melanostictus) in the Sea of Japan, the phenology of sea surface phytoplankton abundance was estimated from 8 day multiple satellite (SeaWiFS, MODIS‐Aqua, MERIS, and VIIRS) derived sea surface chlorophyll (SSChl) a concentrations from January 1998 to December 2015. Because relationships between SSChl a and in situ chlorophyll a concentrations were significantly different among periods based on the satellite combinations used, maximum and minimum SSChl a concentrations of 1 year were relativized as 1 and 0, respectively. Spatio‐temporal variation of relativized SSChl a concentrations was determined by using empirical orthogonal function (EOF) analysis. Scores in the first EOF mode denoted the basin‐scale variations of SSChl a concentrations in the Sea of Japan, and the major peak from the end of February to the end of May displayed the spring bloom. The logarithm of recruitment per spawner (LNRPS) for sardine was positively affected by delays in the start and end dates of the spring phytoplankton bloom. The delay of the date of the lowest sea surface temperature contributed to the delay of the end of the spring bloom during the period 1998–2015 and elevated the LNRPS during the period 1982–2015. Sardine spawns in the southern Sea of Japan from April to May, hence, delays of the spring bloom prolonged its overlap with sardine larval periods, and thus improved the recruitment of Japanese sardine in the Sea of Japan.     

Identification of bitterness-masking compounds from cheese

Bitterness-masking compounds were identified in a natural white mold cheese. The oily fraction of the cheese was extracted and further fractionated by using silica gel column chromatography. The four fractions obtained were characterized by thin-layer chromatography and nuclear magnetic resonance spectroscopy. The fatty acid-containing fraction was found to have the highest bitterness-masking activity against quinine hydrochloride. Bitterness-masking activity was quantitated using a method based on subjective equivalents. At 0.5 mM, the fatty acid mixture, which had a composition similar to that of cheese, suppressed the bitterness of 0.008% quinine hydrochloride to be equivalent to that of 0.0049-0.0060% and 0.5 mM oleic acid to that of 0.0032-0.0038% solution. The binding potential between oleic acid and the bitter compounds was estimated by isothermal titration calorimetry. These results suggest that oleic acid masked bitterness by forming a complex with the bitter compounds.     

Transpiration response of two bread wheat lines differing in drought resilience and their backcross parent under dry-down conditions

Improving wheat productivity in drylands largely depends on how plants manage limited water resources. Using fraction of transpirable soil water threshold (FTSW_Th) and drought stress response function, we characterized the water conservation traits of two wheat multiple synthetic derivative lines (MSD53 and MSD345) which both contain introgressed segments from Aegilops tauschii but differ in drought resilience. The lines and their backcross parent, ‘Norin 61’, were subjected to dry-down conditions. MSD53 had a higher FTSW_Th for transpiration decrease than ‘Norin 61’ and MSD345. In terms of drought stress response function, MSD53 had the lowest threshold suction, suggesting a lower drought resilience capacity compared with MSD345. However, MSD53 exhibited an effective-water-use trait whereas MSD345 exhibited a water-saving trait under dry-down conditions. These results are consistent with the reported higher yield of MSD53 in comparison with MSD345 under drought stress in Sudan, and demonstrate that high FTSW_Th supports effective water use for improved agricultural productivity in drylands. The differences in water conservation traits between the two MSD lines may be attributed to variation in introgressed segments, which can be further explored for drought resilience breeding.     

Archaeal type III RuBisCOs function in a pathway for AMP metabolism

The type III ribulose-1,5-bisphosphate carboxylase-oxygenase (RuBisCO) present in the archaeon Thermococcus kodakaraensis was found to participate in adenosine 5'-monophosphate (AMP) metabolism, a role that is distinct from that of classical RuBisCOs of the Calvin-Benson-Bassham cycle. Genes annotated as thymidine phosphorylase (deoA) and eucaryal translation initiation factor 2B (e2b2) were found to encode AMP phosphorylase and ribose-1,5-bisphosphate isomerase, respectively. These enzymes supplied the RuBisCO substrate, ribulose-1,5-bisphosphate, from AMP and phosphate. Archaea with type III RuBisCOs all harbor both DeoA and the corresponding E2b2 homologs. In this pathway, adenine was released from AMP and the phosphoribose moiety entered central-carbon metabolism.     

Assessment of some soil thermal conductivity models via variations in temperature and bulk density at low moisture range

Simulation of heat transfer in soil under steady and unsteady situations requires reliable estimate of soil thermal conductivity (λ) at varying environmental conditions. In the current work several soil thermal conductivity predicting models including I) de Vries, II) Campbell, III) combined de Vries and Campbell and IV) de Vries-Nobre were evaluated for the four soils of coarse sand, sandy loam, loam and clay loam textured at varying in temperature and bulk density at low moisture range. Thermal conductivities measured by the cylindrical probe method served as the reference for models assessment. Results showed that approximately same thermal conductivities obtained by the five methods at low moisture range (θ ≤ 0.05 m³/m³). Also the de Vries and de Vries-Campbell models produced accurate than Campbell and de vries-Nobre models. The accuracy of the two models increased with soil compaction but decreased with temperature rise. Campbell model showed more reliability at higher (311.16 and 321.16 K) temperatures; but its accuracy declined with soil compaction in current work. It seems that assuming needle shape for the soil particles is far away from the reality whereas assuming spherical shapes may be more realistic and produced more satisfactory prediction of thermal conductivity. The compaction would alter particle arrangement and may increase the contact area of particles; and then make them behave more or less spherical shape.it seems thermal conductivity in solid particles increase via increasing in temperature. Since a modified mineral shape factor, g_m, was developed as a combination between sphere and needle according to geometric mean particle diameter as well as bulk density and temperature as modifying factors. This factor increased the accuracy of de Vries-Nobre model up to 10.37%. Regarding nonlinear regression model, moisture content, bulk density, temperature and quartz content demonstrated significant effect on soil thermal conductivity in our investigation.     

Surface plasmon resonance analysis on interactions of food components with a taste epithelial cell model

A new device for evaluating the continuity of taste was developed with the use of surface plasmon resonance (SPR). The model of lingual cells was constructed with liposomes immobilized onto an L1 sensor chip for SPR. Using this device, we classified food components into three categories according to the sensorgram pattern and residual ratio on lipid bilayer. Samples in group A strongly interacted with lipid bilayer, those in group B poorly interacted, and those in group C belong to neither group A nor group B. Sweet proteins and gymnemic acids that prolonged sweet perception were categorized in group A. Almost all the carbohydrates investigated and aspartame, of which the taste perception does not continue, belonged to group B. This device made it possible to detect the interaction with lipid bilayer and dissected the mechanism of taste continuity.     

A multi-step inflow method for estimating hydraulic conductivity at low pressure under the wetting process

The accurate determination of the wetting soil hydraulic properties for a wide range of water contents is essential for studying and predicting infiltration processes. We present a laboratory infiltration method for determining hydraulic conductivity function, K(θ), in the low-to-medium water content range. An initially air-dry soil core is subjected to infiltration from the bottom where the pressure head, ψ_bot, is controlled through a membrane. As soon as the wetting front arrives at the soil surface, the top 0.5-cm layer is sliced for measurement of the water content. The ψ_bot is stepwise increased as the hydraulic equilibrium is nearly attained at each step. The wetting water retention function, ψ(θ), is determined by curve-fitting the equilibrium inflow data and from the independently measured data obtained from vapor equilibrium. The parameter in the K(θ) is estimated inversely using the cumulative inflow and water content of the sliced layer. This method is verified through comparisons with K(θ) obtained by the Boltzmann transform method. Although requiring an additional operation, the slicing procedure is found to be valuable in enhancing the reliability of the optimized parameter. A sensitivity analysis shows that water vapor movement would be negligible under our experimental conditions.