Investigating the effect of yarn count and twist factor on the packing density and wicking height of lyocell ring-spun yarns

The moisture transport expressed with wicking is one of the most important aspects in clothing science and strongly effects on the quality of clothes. Wicking is a spontaneous transport of liquid driven into a porous system by capillary forces. Furthermore, the packing density has a direct relation with the yarn structure. At the present work, the effects of yarn count and twist factor on the wicking height and packing density of lyocell ring-spun yarns was investigated. Achieving the objectives of this research, an image processing method was developed to determine the packing density of samples. Experimental results were also used to develop a regression model to predict the wicking height based on the packing density, yarn count, twist factor and rising time. The results demonstrated that the correlation coefficient between the predicted and measured wicking height was 0.98 indicating the capability of the presented model to predict the wicking height of lyocell ring-spun yarns.     

A long-snouted predatory dinosaur from africa and the evolution of spinosaurids

Fossils discovered in Lower Cretaceous (Aptian) rocks in the Tenere Desert of central Niger provide new information about spinosaurids, a peculiar group of piscivorous theropod dinosaurs. The remains, which represent a new genus and species, reveal the extreme elongation and transverse compression of the spinosaurid snout. The postcranial bones include blade-shaped vertebral spines that form a low sail over the hips. Phylogenetic analysis suggests that the enlarged thumb claw and robust forelimb evolved during the Jurassic, before the elongated snout and other fish-eating adaptations in the skull. The close phylogenetic relationship between the new African spinosaurid and Baryonyx from Europe provides evidence of dispersal across the Tethys seaway during the Early Cretaceous.     

Variations in body condition of green turtles (Chelonia mydas) in two nearby foraging grounds indicate their sensitivity to foraging habitats

相似文献   

Corpus Luteum Development and Function after Supplementation of Long‐Acting Progesterone During the Early Luteal Phase in Beef Cattle

Strategic supplementation of P4 may be used to increase conception rates in cattle, but timing of supplementation in relation to ovulation, mass of supplementary P4 and formulation of the P4‐containing supplement has not been determined for beef cattle. Effects of supplementation of long‐acting progesterone (P4) on Days 2 or 3 post‐ovulation on development, function and regression of corpus luteum (CL) were studied in beef cattle. Cows were synchronized with an oestradiol/P4‐based protocol and treated with 150 or 300 mg of long‐acting P4 on Day 2 or 3 post‐ovulation (6–7 cows/group). Colour‐doppler ultrasound scanning and blood sample collection were performed from Day 2–21.5. Plasma P4 concentrations were greater (p < 0.05) from Day 2.5–5.5 in the Day 2‐treated groups and from Day 3.5–5.5 in the Day 3‐treated cows than in the control group. CL area and blood flow during Day 2–8.5 did not differ (p > 0.05) among groups, suggesting no effect of P4 treatment on luteal development. The frequency of cows that began luteolysis before Day 15 was greater (p < 0.04) in cows treated with 300 mg than in the controls, but there were no differences between non‐treated and 150 mg‐treated cows. The interval from pre‐treatment ovulation to functional and structural luteolysis was shorter (p < 0.01) in the combined P4‐treated groups than in the control cows. In conclusion, was showed for the first time that long‐acting P4 supplementation on Day 2 or 3 post‐ovulation increases P4 concentrations for ≥3 day, has no effect on luteal development, but anticipates the beginning of luteolysis in beef cattle.     

Two Calorimetrically Distinct States of Liquid Water Below 150 Kelvin

Vapor-deposited amorphous solid and hyperquenched glassy water were found to irreversibly transform, on compression at 77 kelvin, to a high-density amorphous solid. On heating at atmospheric pressure, this solid became viscous water (water B), with a reversible glass-liquid transition onset at 129 +/- 2 kelvin. A different form of viscous water (water A) was formed by heating the uncompressed vapor-deposited amorphous solid and hyperquenched liquid water. On thermal cycling up to 148 kelvin, water B remained kinetically and thermodynamically distinct from water A. The occurrence of these two states, which do not interconvert, helps explain both the configurational relaxation of water and stress-induced amorphization.     

The effect of spinning parameters on mechanical and physical properties of core-spun yarns produced by the three-strand modified method (TSMM)

The effect of spinning parameters on core-spun yarns properties manufactured using three-strand modified method (TSMM) was analyzed. Of the various spinning parameters, strand spacing, yarn linear density and yarn twist have a crucial effect on core-spun yarn properties. To achieve the objectives of this research, general physical properties of core-spun yarns together with existing standards were thoroughly studied. First of all, the strand spacing and yarn linear density were optimized. Afterwards, the effects of variation of yarn twist and sheath roving linear density on core-spun yarns properties were investigated. Finally, the physical and mechanical properties of TSMM yarns were compared with those of siro and conventional ring core-spun yarns counterparts. It was found that, the best strand spacing and yarn linear density to produce core-spun yarns are 8 mm and 45 tex, respectively. Results showed that, tenacity of TSMM yarns increases up to a certain twist level beyond which it reduces. The result confirmed that 45 tex yarns produced by three rovings of the same count are superior with regards to tenacity and hairiness. The optimized yarns produced by three-strand modified method enjoy superior physical and mechanical properties in comparison to the ring and siro core-spun yarns.