Effect of nitrogen rates on yield and quality of fennel (Foeniculum vulgare Mill.) accessions

Nitrogen rates and plant genotypes effects yield and quality of medicinal plants therefore, this experiment was conducted in order to determine the effects of nitrogen rates on fennel accessions quality and quantity. The experimental design was a split plot with nitrogen rate (0, 40, 80, 120 and 160 Kg N ha⁻¹) as main and accession (Isfahan, Tehran, Yazd and EU11486) as sub plots and replicated four times. The experiment was conducted at the Isfahan University of Technology Experimental Station, Isfahan, Iran during 2008-2009. Plant height, number of umbel per plant, 1000seed weight, number of seeds per umbel, seed yield, seed essential oil yield, seed and foliage essential oil contents and seed ash, protein and fiber contents were measured. Nitrogen fertilization increased all measured traits, but reduced ash content. On average, the highest seed and foliage essential contents and seed essential yield were produced at 160 kg per N ha⁻¹ and EU11486 was a superior cultivar for these traits. However, there was an interaction between N rate and accession on all traits. Isfahan (11.65 kg ha⁻¹), EU11486 (38.26 kg ha⁻¹), Tehran (15.32 kg ha⁻¹) and Yazd (22.06 kg ha⁻¹) produced the highest seed essential oil yield under application of 160, 80, 160 and 120 kg N ha⁻¹, respectively. Foliage of the accessions contained 0.45-0.91% essential oil and seeds of accessions contained 17.6-18.2% protein and 8.9-9.4% ash suggesting that foliage of fennel also is a good source of essential oil and seeds of fennel are good sources of protein and minerals. The results showed that N fertilization and accession can affect yield and quality of fennel and accessions responded differently to N fertilization rates, thus selection among the accessions and N rates for better fennel production is possible.     

Effect of potassium rate on growth,quality, chemical composition,and winter hardiness of perennial ryegrass

Seven potassium (K) rates (0, 50, 150, 350, 450, 550, and 650 kg K/ha) were used to determine the optimum rate of K for turf‐type perennial ryegrass during the winter based on turf growth, quality, and winter hardiness. Turf density, color, growth, and winter hardiness were increased as the rate of K application increased up to 350 kg K/ha. However, there were no beneficial effects of K application beyond that rate. Potassium content of the whole plant was 1.72% of the dry matter at the 350 kg K/ha rate. Calcium and Mg contents of the plant were reduced as the result of K application, and a reduction in growth and K content was detected at the higher K application rates. It is suggested that the optimum K rate for perennial ryegrass is about 350 kg K/ha under our experimental conditions in the winter, and that the K content should be about 1.72% of dry weight of whole plant.     

Effect of fertility ratios on growth and turf quality of perennial ryegrass (Lolium prenne L.) in winter

Perennial ryegrass (Lolium prenne L.) has been introduced to Japan as a cool season turfgrass. In spite of relatively mild winter in most parts of the country, it still goes to winter dormancy. A well‐balanced fertility ratio and rate may prevent such dormancy without causing winter injury. Therefore, this experiment was designed to find a balanced rate and ratio among nitrogen (N), potassium (K), and phosphorus (P) fertilizers in order to prevent winter dormancy and promote growth during the winter in Japan. Yorktown 2 perennial ryegrass was used in this experiment. Nitrogen and K application rates were 50, 150, 250, 350, 450, 550, and 650 kg K/ha; whereas P rates were 50, 150, and 250 kg P/ha. These rates were applied in 30 different ratios. Growth, color, and density of the turf were estimated and used as the parameters for finding a suitable rate and ratio for these three major nutrients. Color, density, and growth were increased as the rate of N fertilizer increased, but there was no visual response to P or K rates. It is suggested that increases in color, density, and growth were function of N rates, whereas K and P rates maintained the cold hardiness of the turf when high N rates were applied under the conditions of this experiment. Fertility ratio and the rates of 450 kg N/ha, 250 kg K/ha, and 50 kg P/ha were sufficient to prevent dormancy, promote growth, and produce good quality turf throughout the winter. Thus, it is concluded that fertility ratios and rates are the main factors limiting growth and quality of perennial ryegrass in transitional zones similar to Japan.     

EFFECT OF NITROGEN SOURCES AND RATES ON YIELD AND QUALITY OF SILAGE CORN

The objective of this study was to determine the effect of nitrogen (N) application source and rate on silage corn (Zea mays L.). Urea, ammonium nitrate, and ammonium sulfate were compared at 50, 100, 150, and 200 kg N ha^?1. The application of ammonium sulfate produced the highest plant height, leaf area index (LAI), total yield, and stem, leaf, and ear dry matter, followed by ammonium nitrate and urea. However, nitrogen sources had no marked effects on the content of protein, ash, oil, soluble carbohydrates, acid detergent fiber (ADF) and neutral detergent fiber (NDF). As the rate of nitrogen increased plant height, LAI, total yield, and stem, leaf, tassel, and ear dry matters, and protein, ash and oil contents increased while soluble carbohydrates, ADF, and NDF contents decreased. Ammonium sulfate was the most effective N source on production and 200 kg N ha^?1 was the most effective N rate on corn yield and quality.     

Effect of potassium,sulfur, boron,and molybdenum fertilization on alfalfa production and herbage macronutrient contents

An established two‐year‐old stand of ‘Apollo’ alfalfa (Medicago saliva L.) was used to determine the alfalfa yield and macronutrient contents response to potassium (K), sulfur (S), boron (B), and molybdenum (Mo) fertilization under a high yield environment. A split, split block field design was used with nine micronutrient treatments (0, 50, and 100 g Mo ha^‐1 and 0, 1, and 2 kg B ha^‐1) in a factorial arrangement (3²) as the subplots and three K levels (150, 300, and 600 kg K ha^‐1) as the main plot in three replications. Two levels of S (0 and 240 kg S ha^‐1) fertilization were applied in strips across the main plots (K levels) resulting in the split, split block design. Alfalfa yield and macronutrient contests were determined. Increased in K or S rate increased K contents of the plants, however, the differences between the K or S rates were not significant and B or Mo application did not have a marked effect on alfalfa K levels. Alfalfa calcium (Ca), magnesium (Mg), or phosphorus (P) content was not significantly affected by K, S, B, or Mo fertilization. Potassium, S, B, or Mo fertilizer application also did not have a marked effect on alfalfa yield during this study. Combinations of K, S, B, and Mo fertilizer had variable effects and the effects were dependent on the combination of fertilizer, sources, and levels. With a few exceptions, there was lack of alfalfa yield and nutrient contents response to K, S, B, and Mo applications which was due to the effect of low available soil moisture as a result of low incident rainfall during the study on these nutrients availability, uptake, and alfalfa growth.     

Co-inoculations of arbuscular mycorrhizal fungi and rhizobia under salinity in alfalfa

Alfalfa (Medicago sativa L.) is cultivated in arid and semi-arid regions where salinity is one of the main limiting factors for its production. Thus, this experiment was conducted to evaluate the efficacy of arbuscular mycorrhizal fungus (AMF), Glomus mosseae, alfalfa rhizobia Sinorhizobium meliloti (R) seed inoculation in the development of salinity tolerance of different alfalfa cultivars (Rehnani, Pioneer and Bami) under a variety of salinity levels. The results revealed that under non-stress condition, root mycorrhizal infection, nodulation (the number and weight of nodules per plant), potassium (K), calcium (Ca), phosphorus (P), zinc (Zn), copper (Cu) and magnesium (Mg) contents of the root and shoot, the value of the K/Na ratio, protein [calculated from the nitrogen (N) content] and proline contents of the shoot and the alfalfa yield were found to be the highest while Na contents of the root and shoot were seen to be the lowest when seeds were double inoculated followed by mycorrhizae, rhizobium and control treatments, respectively. Similarly, under salinity condition, the greatest amounts of mycorrhizal infection, nodulation, root and shoot P contents, the value of K/Na ratio, the shoot proline content and the root Ca content were enhanced with the least amount of leaf Na content related to the cases of seeds which were double inoculated, followed by mycorrhizae, rhizobium and control treatments respectively. The results suggested that inoculation of alfalfa seed with AMF or R, especially double inoculation, causes a considerable increase in alfalfa yield under both saline and non-saline conditions by increasing colonization, nodulation and nutrient uptake.     

Treatment of Cr(VI)-spiked soils using sulfur-based amendments

The objective of this research was to assess the hexavalent chromium (Cr(VI)) reducing efficiency of sulfur-based inorganic agents including calcium polysulfide (CPS), iron sulfide (FeS), pyrite (FeS₂) and sodium sulfide (Na₂S) in three soils. An alkaline soil (soil 1), a neutral soil (soil 2) and a slightly acid soil (soil 3) constituted the investigated soils. The soils were spiked with two levels of Cr(VI) (100 and 500 mg Cr(VI) kg^?1 soil) and incubated at field capacity (FC) for one month. Then, CPS, FeS, FeS₂ and Na₂S were added at 0, 5 and 10 g kg^?1 and the concentrations of exchangeable Cr(VI) were measured after 0.5, 4, 48 and 168 h in a batch experiment. The pH and organic carbon content of the soils played predominant role in Cr(VI) self-reduction by the soil itself. Complete self-reduction of Cr(VI) from soils 1, 2 and 3 was achieved at maximum Cr(VI) levels of 1, 50 and 500 mg kg^?1, respectively. Therefore, the concentration of Cr(VI) should not exceed the given levels in order to ensure that Cr(VI) is not released into the environment from contaminated sites. Moreover, decreasing pH in the alkaline soil caused significant increase of Cr(VI) reducing efficiency. Na₂S, CPS and FeS, in contrast to FeS₂, were efficient Cr(VI) reducing agents in all three soils. For all added amendments the following order of Cr(VI) reducing capacity was observed: Na₂S > CPS > FeS > FeS₂ in soil 1, Na₂S ? CPS ~ FeS > FeS₂ in soil 2 and Na₂S ? FeS > CPS ~ FeS₂ in soil 3.     

The comparison of the effectiveness of a modified conformation sensitive gel electrophoresis with denaturing high performance liquid chromatography

Background: Several methods have been developed for detection of sequence variation in genes and each has its advantages and disadvantages. A disadvantage of them is that the simpler, cost-effective methods are commonly perceived as being less sensitive in their detection of sequence variation, whereas those with proven sensitivity have a requirement for complex or expensive laboratory equipment. In this context, we undertook improvements to the conformation sensitive gel electrophoresis (CSGE) method which provides a cost-effective approach to mutation detection and compared the results with scanning carried out using denaturing high performance liquid chromatography (DHPLC) which utilises a dedicated analyser. Methods: We designed PCR primers to amplify the seven protein-coding exons of the human SPP2 gene which encodes secreted phosphoprotein 24 (spp24) such that the amplified products included the immediately-adjacent intronic regions. Five improvements were made to the CSGE method that was used to the scan the PCR-amplified DNA. The scanning was then repeated using DHPLC and the results were compared. Results: Using CSGE, a single nucleotide polymorphism was discovered in exon 2 and another in intron 2 of the gene. Re-scanning of the same regions by DHPLC detected no additional sequence polymorphisms. Conclusion: With modification of the original protocol, CSGE is capable of providing a simple and cost-effective approach to the detection of DNA sequence polymorphisms that appears to be comparable in sensitivity to DHPLC.     

Effect of exogenous application of salicylic acid on salt-stressed sorghum growth and nutrient contents

This study was conducted to investigate the effect of salinity and foliar application of salicylic acid (SA) on sorghum biomass and nutrient contents. Treatments were comprised of salinity levels (0 and 100?mM NaCl) and SA concentrations (0.3, 0.7, 1.1 and 1.5?mM). Salinity increased sodium (Na), chlorine (Cl) and copper (Cu) but decreased nitrogen (N), phosphorus (P), potassium (K), magnesium (Mg), sulfur (S), iron (Fe), zinc (Zn) and manganese (Mn) contents and the root and shoot dry matter. Fe and Zn were the most affected nutrients by salinity. However, SA reduced Na and Cl but increased plant dry matter and nutrient content. SA had greater positive effects on root than on shoot dry matter. Maximum increases through SA were achieved in N, K, Fe, Mn, Cu, and shoot weight under salt stress but in Zn and root weight under non-saline condition. In most cases 1.1?mM was the most effective SA concentration in reducing the negative effects of salinity.