Detection and sequence analysis of avian polyomavirus and psittacine beak and feather disease virus from psittacine birds in Taiwan

Avian polyomavirus (APV) and psittacine beak and feather disease virus (PBFDV) are the most common viral diseases of psittacine birds. In Taiwan, however, the existence of these viruses in psittacine birds has not been established. Polymerase chain reaction (PCR) methodology was therefore employed to ascertain whether APV and PBFDV genomes were present in isolates from psittacine birds of Taiwan. A total of 165 psittacine birds belonging to 22 genera were examined between 2002 and 2005. Findings revealed an APV-positive rate of 15.2%, a PBFDV-positive rate of 41.2%, and an APV/PBFDV dual infection rate of 10.3%. After cloning and sequencing, sequences of the PCR products were compared with sequences obtained from GenBank. For APV, the nucleotide identity among VP1 and t/T antigen coding regions ranged from 97.5% to 100% and 97.6% to 100%, respectively. For PBFDV, the nucleotide identity of ORF V1 and ORF C1 sequences ranged from 92.2% to 100% and 83.3% to 100%, respectively. The derived amino acid sequence alignment for PBFDV ORF V1 fragments revealed the conservation of two replication motifs and of the nucleotide binding site motif. In PBFDV, six of 42 deduced positions in the ORF C1 amino acid sequence were considered hypervariable. The established phylogenetic trees based on the four genome fragments examined in this study did not allow the assignment of particular APV or PBFDV nucleotide sequences to distinct avian species.     

Effects of Silver on the Photocatalytic Degradation of Gaseous Isopropanol

Water, Air, & Soil Pollution - The decomposition of gaseous isopropanol (IPA) by UV/TiO2 process in an annular photoreactor was studied under various conditions such as UV light intensity and...     

Effects of thinning and pruning on knots and lumber recovery of Taiwania (<Emphasis Type="Italic">Taiwania cryptomerioides</Emphasis>) planted in the Lu-Kuei area

This study investigated the effects of various thinning and pruning methods on the knots (number and size) and lumber recovery from Taiwania (Taiwania cryptomerioides Hay.) plantation trees. The results showed that heavy thinning caused more knots and larger-diameter knots than medium or no thinning; moreover, pruning caused fewer numbers of knots and smaller-diameter knots than no pruning. Better-quality Taiwania trees occurred with the no-thinning/no-pruning treatments, as shown by analyzing the knots, although the results also showed that the healing process seemed to have produced not completely clear wood during the 9 years after the pruning treatment. The thinning intensity slightly enhanced the lumber recovery of logs. Pruning did not affect lumber recovery from taiwania trees and logs. Thinning increased the lumber recovery per tree due to an increase in the diameter at breast height.     

Photocatalytic Oxidation of Reactive Red 22 in Aqueous Solution Using La2Ti2O7 Photocatalyst

This study was focused on the application of a highly doped layered perovskite, La₂Ti₂O₇, as the photocatalyst for the photocatalytic decomposition of an azo dye, Reactive Red 22 (RR22). The temporal behavior of the photocatalytic decomposition of RR22 in aqueous solution by the UV/La₂Ti₂O₇ with a batch photoreactor operated in a recirculation mode was studied under various operating conditions including solution pH, light intensity, and La₂Ti₂O₇ loading. The decomposition of RR22 in aqueous solution by La₂Ti₂O₇ photocatalytic process was found to be feasible. An empirical kinetic equation was developed for modeling the photocatalytic decomposition of RR22 in aqueous solution using UV/La₂Ti₂O₇ photocatalytic processes.     

Mutations in the Salmonella enterica serovar Choleraesuis cAMP-receptor protein gene lead to functional defects in the SPI-1 Type III secretion system

Salmonella enterica serovar Choleraesuis (Salmonella Choleraesuis) causes a lethal systemic infection (salmonellosis) in swine. Live attenuated Salmonella Choleraesuis vaccines are effective in preventing the disease, and isolates of Salmonella Choleraesuis with mutations in the cAMP-receptor protein (CRP) gene (Salmonella Choleraesuis ∆crp) are the most widely used, although the basis of the attenuation remains unclear. The objective of this study was to determine if the attenuated phenotype of Salmonella Choleraesuis ∆crp was due to alterations in susceptibility to gastrointestinal factors such as pH and bile salts, ability to colonize or invade the intestine, or cytotoxicity for macrophages. Compared with the parental strain, the survival rate of Salmonella Choleraesuis ∆crp at low pH or in the presence of bile salts was higher, while the ability of the mutant to invade intestinal epithelia was significantly decreased. In examining the role of CRP on the secretory function of the Salmonella pathogenicity island 1 (SPI-1) encoded type III secretion system (T3SS), it was shown that Salmonella Choleraesuis ∆crp was unable to secrete the SPI-1 T3SS effector proteins, SopB and SipB, which play a role in Salmonella intestinal invasiveness and macrophage cytotoxicity, respectively. In addition, caspase-1 dependent cytotoxicity for macrophages was significantly reduced in Salmonella Choleraesuis ∆crp. Collectively, this study demonstrates that the CRP affects the secretory function of SPI-1 T3SS and the resulting ability to invade the host intestinal epithelium, which is a critical element in the pathogenesis of Salmonella Choleraesuis.     

Relationships among selected wood properties of 20-year-old Taiwania (<Emphasis Type="Italic">Taiwania cryptomerioides</Emphasis>) trees

The relationships between bending properties, compressive strength, tracheid length, microfibril angle, and ring characteristics of 20-year-old Taiwania (Taiwania cryptomerioides Hay.) trees were examined. The trees came from different thinning and pruning treatments, but the practices showed no significant effect on the investigated properties. The results showed that based on comparison with the literature, plantation-grown immature Taiwania have noticeably lower average strength properties than mature trees of the same species. Wood density and bending and compressive strengths were not related to either tracheid length or microfibril angle in young Taiwania. There were positive relationships between bending strength and compressive strength. The wood density, ring width, earlywood width, earlywood density, and latewood percentage were the most important predictors of strength by simple linear regressions. The wood density and ring width/earlywood width may be considered as indicators for assessing the bending strength, while wood density and latewood percentage were the best predictors of compressive strength by multiple linear regressions.     

Application of the fractometer for crushing strength: juvenile-mature wood demarcation in Taiwania (Taiwania cryptomerioids)

The fractometer is a device that breaks a radial increment core along the fiber for the measurement of crushing strength, which is a direct wood quality indicator for structural lumber. In this study, the crushing strength of Taiwania (Taiwania cryptomerioides Hay) trees using the fractometer was investigated and the data were used to determine the position of demarcation between juvenile and mature wood. Segmented regression and variance component analysis were used to estimate the demarcation position. With increasing cambium age, the core wood improves the crushing strength in the outer wood area. Within-tree variations in wood properties were greater than between-tree variations. In this experiment, the position of demarcation between juvenile and mature wood occurred at an approximate distance of 10.8cm to 13.2cm from the pith at about 18–20 years of cambium age.     

Dynamic modulus of elasticity and bending properties of young Taiwania trees grown with different thinning and pruning treatments

The effects of different thinning and pruning methods on the bending strength and dynamic modulus of elasticity (DMOE) of young Taiwania (Taiwania cryptomerioides Hay) were investigated. The average DMOE, modulus of elasticity (MOE), and modulus of rupture (MOR) in the thinning treatments showed the following trend: no thinning > medium thinning > heavy thinning. This indicates that thinning reduces average bending properties. The average DMOE, MOE, and MOR in the pruning treatments showed the following trend: medium pruning > no pruning > heavy pruning. According to this tendency, better average qualities of lumber and specimens were from wood subjected to no-thinning and medium-pruning treatments according to an ultrasonic wave technique and static bending tests. However, most results showed no statistically significant differences among thinning, pruning, and thinning and pruning treatments. The average values of DMOE, MOE, and MOR of visually graded construction-grade lumber were significantly greater than those of below-grade lumber. Moreover, there were very significant positive relationships between density, ultrasonic velocity, DMOE, MOE, and MOR, although the determination coefficients were small.     

PAN-based carbon nanofiber absorbents prepared using electrospinning

This study takes polyacrylonitrile (PAN) as a raw material for PAN-based nanofiber nonwoven prepared using electrospinning. First we construct a thermal-stable process for the fabrication of oxidized nanofiber nonwovens as the precursor. A semi-open high-temperature erect furnace is then used with steam as the activator, through carbonization and activation processes to prepare carbon nanofiber absorbents continuously. The experiment varies the production rate and activator flow rate to prepare carbon nanofiber absorbents. Experimental results show that carbon nanofiber adsorbents are primarily made up of micropores and mesopores, averaging under 20 Å. Given a production rate of 10–20 cm/min with a matching activator feed rate of 120 ml/min, the specific surface area can reach about 1000 m²/g, producing an adsorption ratio of carbon tetrachloride over 200 %.     

Radial distribution patterns of the green moisture content in trunks of 46-year-old red cypress (<Emphasis Type="Italic">Chamaecyparis formosensis</Emphasis>)

Understanding the green moisture content and wood density is important for effective forest management. Radial distribution patterns in the green moisture content (MC) and basic density (BD) in stems of red cypress (Chamaecyparis formosensis) were investigated in 69 plantation trees that were 46 years old. An increment core was collected from each sample tree at breast height (1.3 m). Five radial positions were defined: pith piece (Pith), inner heartwood (IHW), outer heartwood (OHW), intermediate wood (TSH), and sapwood (SW). Results showed that the average MC was highly dependent on the individual tree. Average values of the MC obtained from the TSH were significantly lower than those for the other positions. The MC of heartwood was higher than that of SW. Distribution patterns of the MC in the radial direction varied among trees. Radial variations in MC and BD were greater than in between-tree variations. Six types of radial distribution patterns of MC were detected for sample trees. MC values increased with decreasing BD (except for the TSH). Positive correlations were found between adjacent sampling positions in both MC and BD.