Measuring N2O emissions from organic soils by closed chamber or soil/snow N2O gradient methods

Drained organic soils contribute substantial amounts of nitrous oxide to the global atmosphere, and we should be able to estimate this contribution. We have investigated when the fluxes of N₂O from drained forested or cultivated organic soils could be determined by calculating the fluxes from the concentration gradients of the gas in soil or snow according to Fick's law of diffusion. A static chamber method was applied as a control technique for the gas gradient method. Concentrations of N₂O in soil varied from 296 nl l^?1 to 8534 nl l^?1 during the snow‐free periods and were greatest in the early summer. Our results suggest that the gas gradient method can be used to estimate N₂O emissions from drained organic soils. There was some systematic difference in the N₂O fluxes measured with these two methods, which we attributed to the differences in weather between years 1996 and 1997. In the wet summer of 1996 the chamber method gave greater flux rates than the gas gradient method, and the reverse was true in the dry summer of 1997. In the forest the N₂O fluxes measured with the two methods agreed well. The gas gradient is convenient and fast for measuring N₂O emissions from fairly dry organic unfrozen soil. In winter the diffusion calculation based on the N₂O gradients in snow and the chamber method gave fairly similar flux rates and provided adequate estimates of the fluxes of N₂O in winter.     

Effects of forest restoration treatments on the abundance of bark beetles in Norway spruce forests of southern Finland

Restoration of protected areas in boreal forests frequently includes creating substantial volumes of dead wood. While this benefits a wide range of dead wood dependent invertebrate species, some of these are regarded as forest pests. Therefore, the risk of elevated levels of tree mortality in surrounding commercial forests must be considered. In a large-scale field experiment in southern Finland, we studied the effects of restoration treatments on the abundance of bark beetles within and in the vicinity of restored areas, in particular focusing on Ips typographus and Pityogenes chalcographus. The treatments applied to managed Norway spruce forests were controlled burning and partial harvesting combined with retaining 5, 30 or 60 m³/ha of cut down wood. We found that the abundance of bark beetles increased by both burning and harvesting with down wood retention, being highest where burning and harvesting had been combined. The actual volume of down wood retention had no significant effect. The effect of burning on the number of bark beetles along host tree boles was negative which suggests that burnt spruces provided a less suitable resource for bark beetles than unburnt dead spruces. The abundance of bark beetles along host trees also decreased with increasing volume of down wood retention. The abundance of P. chalographus was slightly elevated up to 50 m outside restored areas but the abundance was very low compared to that within the areas. The abundance of I. typographus was extremely low outside restored areas. We conclude that restoration treatments increase the abundance of bark beetles via increased availability of resources, but that the effect of burning is likely to be counteracted by decreased resource quality. Thus, burning might be the “safest” way to produce large quantities of dead wood. Furthermore, the fact that only few beetles were collected in adjacent areas suggests that restored areas pose little threat of serving as refugia in which bark beetle populations increase in sufficient numbers to attack live trees in adjacent forests. However, restoration actions repeated at consecutive years within a small area might enable the populations to grow to outbreak levels.     

LEAF MINERAL COMPOSITION OF ‘NOVA’, ‘ROBINSON’ AND ‘FREMONT’ MANDARIN CULTIVARS ON DIFFERENT ROOTSTOCKS

Rootstock selection has a critical importance for mineral nutrition of budded cultivars. This study was conducted at the experimental farm of Mustafa Kemal University, Dörtyol, Turkey. The aim of this study was to investigate the effect of sour orange, Troyer and Carrizo citrange rootstocks on the leaf nutrient contents of ‘Nova’, ‘Robinson’, and ‘Fremont’ mandarin cultivars in the 2004 and 2005 growing seasons. Carrizo citrange was examined for nitrogen (N), potassium (K), magnesium (Mg), sodium (Na), and manganese (Mn); Troyer citrange for iron (Fe); and sour orange for calcium (Ca) and zinc (Zn) were superior on the others. Nitrogen, phosphorus (P) and Mg levels of mandarin leaf budded on sour orange were under or just above the deficiency threshold. Potassium, Mn, and Zn content of ‘Robinson’; P, Ca and Fe content of ‘Fremont’; and Cu content of ‘Nova’ were statistically higher. Therefore, it can be concluded that Carrizo rootstock may be suggested for the region and regions with similar ecological conditions.     

Cadmium contents of oats (Avena sativa L.) in official variety,organic cultivation,and nitrogen fertilization trials during 1997-1999

The cadmium (Cd) contents of oats (Avena sativa L.) in Finland were examined over a 3 year period in three types of trials: official variety, organic vs conventional cultivation, and nitrogen fertilization trials. Large seasonal and regional variations were found in the Cd concentrations. In official variety trials, the mean Cd contents in 1997, 1998, and 1999 were 0.046, 0.029, and 0.052 mg kg(-1) dry weight (dw), respectively, ranging from 0.008 to 0.120 mg kg(-1) dw. The concentrations were generally well below the maximum permitted level of 0.100 mg kg(-1) fresh weight. No significant differences were found between the organic and the conventional cultivation techniques. Nitrogen (N) fertilization increased the Cd contents of oats especially at high nitrogen rates (160 kg N hectare(-1) (ha)). Significant cultivar differences (p < 0.001) were determined in all trials. Cultivars Salo and Kolbu had consistently higher contents, and Belinda and Roope had lower Cd contents among the different growing conditions. Hence, it is possible to cultivate and develop oat cultivars less likely to accumulate Cd.     

Effects of linear density and twist level on the mechanical properties of nylon 6.6 tyre cords

The performance of high tenacity nylon 6.6 tyre cords with different linear densities (dtex) was investigated by measuring some mechanical, structural and physical properties. The structural changes due to the dipping process were analyzed by differential scanning calorimetry and X-ray diffraction analysis. The breaking strengths were increased with the increasing linear densities, but decreased with twist level. As the linear density increases, shrinkage values of greige cords were increased. Shrinkage is mostly dependent on amorphous parts of the cords. Since amorphous parts of the dipped cords are lower than greige cords, shrinkage values for dipped cord were lower than that of greige cords. Adhesion values were increased with the increasing linear density and twist level. It has been observed that increasing of the twist levels explicitly improved the fatigue resistance in the cases 1400 and 1880 dtex cords. But, no significant changes were observed for 940 dtex cords. It has been found that cords with lower linear densities had better fatigue resistance than that of the cords with higher linear densities.     

Photosystem II and cellular membrane stability evaluation in hexaploid wheat seedlings under salt stress conditions

Salinity limits crop production in large areas of the world. The application of in vitro Photosystem II (PS‐II) activity measurements to screen hexaploid wheat (Triticum aestivum, L.) genotypes for NaCl tolerance has been investigated by comparing their responses under stress and control (no added NaCl) conditions. One of the four cultivars used in the study was ‘Kharchia’ known for its high salt tolerance. Wheat seedlings were grown hydroponically in environmental chambers and treated with a range of NaCl concentrations (0.034 M, 0.17 M, 0.68 M, or 3.42 M) over a 1, 3, and 5‐day period. The salt treatments were started in the appropriate time so that they were all ten‐day‐old during harvest. Cellular membrane stability (CMS) as measured by a conductivity method and PS‐II activity values were affected adversely by NaCl concentration and duration of treatment. Both methods clearly distinguish between salt‐sensitive and salt‐tolerant genotypes. Statistical analysis showed that PS‐II activity and CMS measurements are well correlated (r=0.7589) suggesting that PS‐II activity would be used as an additional screening method besides CMS to evaluate salt tolerance of wheat.     

RESPONSES OF GRAFTED WATERMELON ONTO DIFFERENT GOURD SPECIES TO SALINITY STRESS

The watermelon cultivar ‘Crimson Tide’ was grafted onto three different rootstocks and grown under saline conditions to investigate effects of salinity on grafted and non-grafted watermelon. One Cucurbita maxima and 2 Lagenarai siceraria landraces (Skp and Brecik) were used as rootstock. Plants were irrigated with two different saline solutions [0.5 (control) and 8.0 dS m^?1] by two days interval at the first 15 days of experiment and one day interval at the last 15 days of experiment. The experimental design was randomized block. Each treatment was replicated three times with three plants. Grafted plants had higher plant growth parameter than non-grafted plant under saline conditions. Reduction in shoot dry weight was 41% in non-grafted plants while it was varied from 22% to 0.8% in grafted plants under saline conditions. Accumulation of sodium (Na⁺) was higher in non-grafted plants than grafted one. Calcium (Ca⁺⁺) and magnesium (Mg⁺⁺) concentration were higher in all grafted plants than non-grafted plants. Non-grafted plants had higher K⁺ concentration than other treatments under saline conditions. Ratios of Ca⁺⁺/Na⁺, K⁺/Na⁺ and Mg⁺⁺/Na⁺ were significantly affected by salt treatments and positively correlated with plant growth parameters. The ratios were lower in non-grafted plants than grafted plants under saline conditions.     

Nylon 66/polyester hybrid cords: 1. Design and investigation of properties

In this study, Nylon 66/Polyester (Ny 66/PET) hybrid cord design and production was investigated to obtain new cord with better performance than conventional cord. The factors affecting cord properties and cord production process were examined. Taguchi design of experiment method was implemented in order to minimize the required number of experiments. Different sets of 4 reference cords conventionally used in tyre industry were prepared and resorcinol-formaldehyde-latex (RFL) treated in order to make a comparison of performance. Mechanical and thermal properties of hybrid cords were measured and compared with the values of reference cords. It was found that the twist level of high modulus PET component in the hybrid cords should be the same or above of the nylon in order to obtain maximum tensile strength. It was observed that shrinkage values of hybrid cords varied between PET and Ny 66 reference cords. Moreover, for all treated hybrid cords, satisfactory cord-rubber adhesion values were obtained by using double dip adhesion system.