A dynamic risk assessment model (FUMAgrain) of fumonisin synthesis by Fusarium verticillioides in maize grain in Italy

Fumonisin contamination of maize grain starts in the field. Forecasting Fusarium infection and fumonisin synthesis could allow operators in the field to control contamination during the growing season and to make the best agronomic decisions for high quality yields while respecting the limits imposed by the European Union.A research project to develop a decision support system for the control of field-phase fumonisin contamination began in Italy in 2003. This paper presents a preliminary version of the engine of the decision support tool: FUMAgrain, a dynamic risk assessment model developed with data from the north of Italy. The structure of FUMAgrain is based on the pathosystem formed by maize, F. verticillioides and Ostrinia nubilalis (European Corn Borer). The elements of the pathosystem are simulated by three sub-models: (i) maize development, (ii) F. verticillioides infection and fumonisin synthesis, (iii) European Corn Borer wounding activity on maize grain. Inputs to the model are (i) planting date, (ii) hourly meteorological data including temperature, relative humidity, wind speed and rain intensity, (iii) information on the phenological development of the hybrid planted (flowering and dry-down), and (iv) information about the chemical treatment against European Corn Borer. FUMAgrain gives an initial risk alert at the end of flowering based on the meteorological conditions during this phase. A second alert follows maturation when an assessment is made from (i) maize grain moisture, (ii) European Corn Borer damage to the ear, and (iii) fumonisin synthesis risk. Following calibration and validation with data FUMAgrain demonstrated its good capability to simulate fumonisin synthesis in maize grain in Italy (calibration: R² = 0.70; validation: R² = 0.71) and its usefulness for determining the optimal harvest date while respecting grain safety levels required by the international market and limiting moisture content, hence drying costs.     

Adsorption of flavonoids on resins: hesperidin

Adsorption of hesperidin from aqueous solutions on styrene-divinylbenzene (SDVB) and acrylic resins was investigated at different pH values (1.5-5.5) and temperatures (10-40 degrees C). Adsorption was not affected by pH variation, whereas it increased on increasing temperature for the SDVB resins and remained substantially unchanged for the acrylic ones. The different behavior of the two types of resins was ascribed to the different wetting, because of their hydrophobic or partially hydrophilic properties, respectively. The equilibrium data at 20 degrees C were determined on 13 commercial resins displaying a wide range of surface areas (S(A), 330-1200 m(2)/g) and pore radii (P(R), 20-260 A). Data were well fitted to the Freundlich isotherm, and its parameters were used to compare the adsorption capacity of different resins. The most effective resin is a SDVB copolymer with the largest S(A) (1200 m(2)/g) and an intermediate P(R) (90 A). The Freundlich constants (K(F)) were rationalized in terms of a two parameter equation, including S(A) and P(R) as independent variables. The adsorption constant increased on increasing both S(A) and P(R) for the resins having P(R) 相似文献   

Residue level, persistence, and storage performance of citrus fruit treated with fludioxonil

The potential of postharvest dip treatments with fludioxonil (FLU) (a synthetic analogue of the bacterial metabolite of pyrrolnitrin), in controlling postharvest decay caused by Penicillium digitatum and Penicillium italicum of citrus fruit was investigated in comparison with the conventional fungicide imazalil (IMZ). The ultrastructural changes of fruit epicuticular wax was investigated as a function of water dip temperature, and the possible role of these changes was related to residue accumulation under FLU treatment. Residues retained by fruit were determined as a function of fungicide concentration, dip temperature, and fruit storage conditions. Scanning electron microscopy analysis revealed that fruit dipping in water at 30 or 40 degrees C did not cause differences in cuticular wax's ultrastructure in comparison to control fruit, while treatments at 50, 55, or 60 degrees C caused the disappearance of wax platelets, resulting in relatively homogeneous skin surface, due to partial "melting" of epicuticular wax. Residues of FLU in fruit treated at 20 or 50 degrees C were significantly correlated with the doses of fungicide applied. When equal amounts of fungicide were employed, the residue concentrations were notably higher (from 2.6- to 4-fold) in fruit treated at 50 degrees C than in fruit treated at 20 degrees C. The dissipation rate of FLU in "Salustiana" and "Tarocco" oranges was lower in fruit subjected to treatment at 50 degrees C. The minimal FLU concentration for almost complete decay control in artificially wounded fruit during 7-d storage at 20 degrees C was 400 mg/L active ingredient (ai) in fruit treated at 20 degrees C and 100 mg/L ai in fruit treated at 50 degrees C. Results on nonwounded Tarocco oranges subjected to 3 weeks of simulated quarantine conditions at 1 degrees C, plus 6 weeks of standard storage at 8 degrees C and an additional two weeks of simulated marketing period (SMP) at 20 degrees C revealed that almost complete decay control with FLU applications of 100 mg/L at 50 degrees C and 400 mg/L at 20 degrees C resulted in ca. 0.8 mg/kg FLU fruit residues, in agreement with results on wounded citrus fruit. When equal concentrations and temperatures were applied, FLU treatments were as effective as IMZ. In vitro trials showed a low sensitivity to FLU against P. digitatum and P. italicum isolates. MIC values for the complete inhibition of mycelium growth were >or=100 microg/mL, while ED(50) values ranged from 0.1 to 1 microg/mL for P. digitatum and from 1 to >100 microg/mL for P. italicum. The latter result suggests that care should be taken to avoid exclusive application of FLU in a sustainable program for management of fruit decay. However, integrating fungicide application and hot water dip may reduce the possibility of selecting fungicide-resistant populations of the pathogen, by increasing the effectiveness of the treatment.     

Phloroglucinol from phlorin hydrolysis for testing quality of commercial orange juices and beverages

The European Association of Juices and Nectars Producers (AIJN) is evaluating the opportunity to introduce the content of phlorin (3,5-dihydroxyphenyl beta-D-glucopyranoside), a peel marker for oranges, as a parameter for testing the quality of orange juices. Because of the lack of a commercial standard of phlorin and its laborious isolation procedures, in this contribution is developed a simple and reliable method for measuring the phlorin level as the corresponding aglycon phloroglucinol, obtained after a total enzymatic hydrolysis of the sample. The method was applied to the quantification of phloroglucinol in several industrial and commercial blond and pigmented orange juices and beverages based on 12% orange juice. Under the same extraction procedure, the phloroglucinol content in the pigmented juices was higher than in the blond ones. No significant difference was obtained between not from concentrate juices and reconstituted from concentrate juices. The marker amount increases in the highly processed orange fruits and in the byproducts of citrus processing due to the contact of the juice with the albedo, which is the major source of phlorin. In orange-based beverages the phloroglucinol content revealed a large heterogeneity and a poor quality of the raw juices used.     

Residue levels and effectiveness of pyrimethanil vs imazalil when using heated postharvest dip treatments for control of Penicillium decay on citrus fruit

The influence of fungicide concentration and treatment temperature on residue levels of pyrimethanil (PYR) in comparison with the commonly used fungicide imazalil (IMZ) was investigated in orange fruits following postharvest dip treatments. The dissipation rate of PYR residues was recorded as a function of storage conditions. The fungicide efficacy against green and blue molds caused by Penicillium digitatum and Penicillium italicum, respectively, was evaluated on different citrus varieties following the fungicide application at 20 or 50 degrees C. Residue levels of PYR in Salustiana oranges were significantly correlated with the fungicide dosage, but residue concentrations were notably higher (ca. 13-19-fold) after treatment at 50 degrees C as compared to treatments at 20 degrees C. After treatment at temperatures ranging from 20 to 60 degrees C, PYR and IMZ residues in Salustiana oranges were significantly correlated with dip temperatures. Dissipation rates of PYR during storage were negligible in both Salustiana and Tarocco oranges. Results obtained on wounded, noninoculated Miho satsumas revealed that when treatments were performed at 50 degrees C, PYR or IMZ concentrations needed to achieve the complete control of decay were 8- and 16-fold less than by treatment at 20 degrees C. When fruits were inoculated with either P. digitatum or P. italicum, the application of 400 mg L(-1) PYR at 20 degrees C or 100 mg L(-1) PYR at 50 degrees C similarly reduced green and blue mold development. These results were corroborated by storage trials on Marsh grapefruits and Tarocco oranges. The lowest concentration of PYR required to achieve almost total protection of the fruit against decay accounted for 100 mg L(-1) at 50 degrees C and 400 mg L(-1) at 20 degrees C, respectively. Treatments did not affect fruit external appearance, flavor, and taste. It is concluded that postharvest PYR treatment represents an effective option to control green and blue mold in citrus fruit and that integration of fungicide applications and hot water dips may reduce the possibility of selecting fungicide-resistant populations of the pathogen, as a consequence of increased effectiveness of the treatment.     

Influence of postharvest hot water treatment on nutritional and functional properties of kumquat (Fortunella japonica Lour. Swingle Cv. Ovale) fruit

The present study investigated the influence of a hot water dip (HWD) for 2 min at 50 degrees C, a standard and effective treatment for postharvest decay control of citrus fruit, on the nutritional and health-related properties of kumquats. The results show that most of the parameters examined, including titratable acidity, soluble solids content, maturity index, glucose, fructose, sucrose, ascorbic acid, dehydroascorbic acid, alpha- and gamma-tocopherols, beta-carotene, zeaxantin, rhoifolin, and antioxidant activity, were not significantly affected by treatment. The levels of beta-cryptoxanthin, narirutin, and total flavonoids increased after HWD, whereas lutein and total phenols decreased. The concentration of the essential oil and the relative percentage of the individual components of the essential oil were not affected by HWD except for the minor compound p-menta-1,5-dien-1-ol, which increased after HWD. After storage, lower levels of glucose, total sugars, beta-carotene, beta-cryptoxanthin and lutein were recorded in HWD fruit. A decrease in antioxidant activity and increases in alpha-tocopherol and total vitamin E were found both in control and HWD fruit. The influence of HWD at 50 degrees C for 2 min on individual nutraceuticals and health-related properties was thus generally low and may depend on storage conditions.     

Factors affecting the synergy of thiabendazole, sodium bicarbonate, and heat to control postharvest green mold of citrus fruit

The efficacy of thiabendazole (TBZ) to control postharvest decay caused by Penicillium digitatum of citrus fruit can be enhanced by co-application with sodium bicarbonate (SBC) and/or heat treatment. The impact of these treatments was investigated in citrus fruit, as a function of TBZ and SBC concentration and temperature, and were related to the amount of TBZ residues in fruit (total residues), in fruit surface, in the cuticular wax, and in the inner fruit. The residue levels of TBZ were determined in 'Valencia' oranges following a 1 min dip in an aqueous mixture of SBC at 0.5, 1, or 2 wt %/vol and TBZ at 600 or 400 mg/L (active ingredient, a.i.) at 20 or 40 degrees C and after 0 and 20 days at 17 degrees C and 90% relative humidity. The influence of SBC and heat on the TBZ residue concentration on the fruit surface, in cuticular wax, and on the inner cuticle tissue was determined in 'Salustiana' oranges after a 1 or 3 min dip in TBZ alone at 600 mg/L and 20 or 50 degrees C or for 1 min in TBZ at 600 mg/L and SBC at 2% and 20 degrees C. The efficacy of heat treatments with water, SBC, and TBZ, applied separately or in combination, was investigated on artificially inoculated 'Nova' mandarins and 'Valencia' oranges for the control of postharvest green mold caused by a TBZ-sensitive (TBZ-s) or TBZ-resistant (TBZ-r) isolate of P. digitatum. The residue levels of TBZ in fruit, evaluated as total residues, were not affected by the co-application of SBC in most samples. While TBZ residues in the fruit surface were not significantly affected by the dip temperature or by co-application of SBC, the rates of diffusion and penetration of TBZ into cuticular wax markedly increased in the presence of SBC or when TBZ was applied in combination with heat. TBZ residues in the inner tissue of fruits treated at 20 degrees C were not dependent upon the dip time or by the presence of SBC and were similar to those found in fruit treated with TBZ at 50 degrees C for 1 min, whereas significantly higher values were recorded in samples treated with TBZ at 50 degrees C for 3 min. When TBZ at 600 mg/L and 20 degrees C was applied in the presence of SBC at concentrations of 1-2 or 0.5-2%, it effectively reduced decay caused by the TBZ-resistant isolate of green mold in 'Nova' mandarins and 'Valencia' oranges. This treatment was also significantly more effective than TBZ alone to control green mold caused by a TBZ-s isolate in 'Valencia' oranges. The combination with SBC and mild heat (40 degrees C) and TBZ at 400 mg/L generally improved the control of a TBZ-r isolate of green mold with respect to the combined treatment at 20 degrees C. TBZ efficacy was also improved when applied at reduced rates (200 mg/L) and 50 degrees C, significantly suppressing green mold caused by a TBZ-s isolate of P. digitatum and effectively controlling a TBZ-r isolate. The rate of weight loss of 'Valencia' oranges was significantly increased by SBC treatment and was positively dependent upon the concentration of SBC used in the treatment, while the temperature of the treatment solution had little influence on later weight loss.     

Effect of nitrogen fertilization on yield and quality of durum wheat cultivated in northern Italy and their interaction with different soils and growing seasons

Durum wheat in temperate regions can lead to yields with higher technological quality and stability compared to Mediterranean areas. The aim of this study was to determine the effects of nitrogen (N fertilization on grain yield and quality, in different pedo-climatic conditions of temperate areas. Field experiments were conducted in two sites (sandy-loam and silty-clay-loam) in Northern-West Italy for three years: five different N rates, two different types of fertilizers (ammonium nitrate, nutritional activator, slow-release fertilizer) were compared considering yield, protein content and yellowberry. N fertilizer rate had a more consistent effect on protein than yield; the response was affected by soil texture and rainfall during the growing season. The use of different types of fertilizer seem to play a minor role. The management of N fertilization must consider mainly the effect on quality parameters of N rates and rainfall during the growing season and their interaction with soil texture.     

Effect of plant density on toxigenic fungal infection and mycotoxin contamination of maize kernels

Field experiments were set up from 2001 to 2004 in North West Italy to determine the effects of plant density on the susceptibility of medium and medium-late maturity maize hybrids to ear rot and to mycotoxin contamination in natural infection conditions. The ears were rated for the incidence and severity of disease symptoms at harvest and the harvested kernels were analysed for mycotoxin fumonisin B₁, zearalenone, deoxynivalenol, aflatoxin B₁ and ochratoxin A.     

Ochratoxin a in Grapes and Wine

The mycotoxin ochratoxin A is a potent nephrotoxin and a possible human carcinogen. It occurs in a variety of plant products, including wine, grape juice and dried vine fruits. Several surveys have shown that the range of ochratoxin A contents detected in wine produced in Europe varied between 0.01 and 3.4gl^–1. Both incidence and concentration of the toxin were higher in wines from southern regions and increased in the order white < rosè < red. In Italy, field trials were conducted in 1999 and 2000 to study fungi associated with grapes and their ability to produce ochratoxin. Aspergillus and/or Penicillium strains were present on grapes, starting from setting in a few vineyards. The highest level of grape colonisation was found at early veraison in 1999 and at ripening in 2000. In both years, 95% of strains belonged to the genus Aspergillus. Aspergillus niger aggregate was dominant, with about 50% of the ochratoxin-positive strains identified as A carbonarius. Other authors have confirmed the relevance of these fungi and underlined the contribution of A. carbonarius to the ochratoxin contamination of wine. This species is very invasive and colonises and penetrates berries, even without skin damage. It emerges that temperature, rain and relative humidity are the main factors that influence ochratoxin production in grapes.