杉木第3代种子园多元素配方施肥效应研究

杉木种子园为培育高产稳产杉木良种提供重要保障,在林业生产中具有积极意义。通过试验研究,探究杉木3代种子园土壤养分丰缺情况、养分间的平衡规律,确定杉木种子园最佳肥料配比和施肥量,以期为闽北低山丘陵红壤分布区杉木种子园提供推荐施肥配方。采用“3414”配方施肥设计方案,对闽北第3代杉木种子园开展N、P、K、Ca、Mg、B、Mo等元素施肥试验。分别设计大量元素氮、磷、钾三因素施肥水平（并增设施用钼肥处理）、中微量元素钙、镁、硼三因素施肥水平,以球果数量（质量）、出籽率、种子产量、胸径等为评价指标,拟合肥料效应函数方程,研究各养分间的作用规律,并提出最佳施肥配比和施肥量。结果表明：种子园土壤N、P、K、Ca、Mg养分含量较低,B含量属于中等水平,而Mo含量较高;N、P、Mg以及N-K、Ca-B肥料联合对种子园产量的影响达到显著或极显著水平,而单施某一肥料效应较小,其中单施K、Ca、B几乎没有效果,而肥料联合施用效果较好。综合效应分析结果,得出种子园最大产量施肥量组合为：每株施尿素100 g+过磷酸钙897 g+氯化钾150 g+石灰150 g+硫酸镁105 g+硼砂75 g,并配施钼肥。N、P₂O₅、K₂O、CaO、Mg、B、Mo的用量依次为46.0、107.7、90.0、75.0、31.4、2.3、5.0 g,其配比为N:P₂O₅:K₂O:CaO:Mg:B:Mo=1.0:2.3:2.0:1.6:0.7:0.05:0.1。多元素配方施肥能很好地改善杉木种子园产量和质量,单株球果产量、球果单粒重、出籽率及种子园产量等指标均比不施肥的母树有大幅度提高。本研究施肥方案,理论上种子园产量可达45.99~95.65 g/株,大量元素施肥试验的产量达到理论产量的80%~86%,中微量元素施肥试验的产量为理论产量的70%左右。现实种子园平均产量大约是预测产量的40%,通过合理配方施肥有望大幅度提高杉木3代种子园产量。     

水稻育性调控相关基因RNAi载体的构建及其表型鉴定

利用RNAi干扰技术研究不同基因对花粉发育、卵细胞发育和合子胚发育的影响是一种重要的手段。本研究通过筛选水稻在生殖发育过程中的9个重要调控基因,构建基因的RNAi表达载体,分析转基因植株育性及相关性状表型,以期探明RNAi表达载体对靶标性状的干扰效应。其中,AT61~AT63、AT64~AT66、AT67~AT69表达载体分别靶标花粉育性、卵细胞发育以及合子胚发育的调控。结果表明,除RNAi表达载体AT64没有获得转基因植株外,其余8个RNAi表达载体均获得了转基因植株;对T0代转基因植株的花粉育性、结实率以及潮霉素筛选(40 mg/L)发芽率检测的统计结果显示,RNAi表达载体AT62(花粉发育调控)、AT65(卵细胞发育调控)和AT67(合子胚发育调控)的干扰效应较强。本研究结果将为创制新型水稻基因工程不育系提供策略和选择。     

基于GGE双标图对苜蓿品种丰产性和稳定性综合评价

为了解不同苜蓿（Medicago sativaL.）品种在宁夏南部山区的丰产性、稳产性，以及试点的代表性和区分力，本研究利用方差分析、GGE双标图模型对区域3个不同试点的6个苜蓿品种的产量进行分析。结果表明：苜蓿产量最高的试验区是原州区彭堡镇彭堡三队，最低的是隆德县关庄乡前庄村，前者比后者高43.7%；产量最高的品种是‘甘农7号’，最低的是‘阿尔冈金’，前者比后者高44.9%；联合方差分析显示，基因型与环境互作（G×E）、环境（E）、基因型（G）对品种产量影响显著（P<0.05），其中G×E是引起苜蓿产量差异的最主要原因，它引起的变异是E的1.19倍，是G的1.58倍。利用GGE双标图模型分析可知，高产稳产的品种是‘三得利’、‘苜蓿王’；3个不同区域可划分为2个生态区，原州区头营镇徐河村和原州区彭堡镇彭堡三队为1个，隆德县关庄乡前庄村为1个；综合代表性和区分力，较理想的试点为头营镇徐河村。     

Effects of different five-day progesterone-based synchronization protocols on the estrous response and follicular/luteal dynamics in dairy cows

This study compared the responses shown by lactating dairy cows to four different P4-based protocols for AI at estrus. Cows with no estrous signs 96 h after progesterone intravaginal device (PRID) removal were subjected to fixed-time AI (FTAI), and their data were also included in the study. In Experiment I, follicular/luteal and endometrial dynamics were assessed every 12 h from the beginning of treatment until AI. The estrous response was examined in Experiment II, and fertility was assessed in both experiments. The protocols consisted of a PRID fitted for five days, along with the administration of different combinations of gonadotropin releasing hormone (GnRH), equine chorionic gonadotropin and a single or double dose (24 h apart) of prostaglandin F_2α. In Experiment I (40 cows), animals receiving GnRH at the start of treatment showed a significantly higher ovulation rate during the PRID insertion period while estrus was delayed. In Experiment II (351 cows), according to the odds ratios, cows showing luteal activity at the time of treatment were less likely to show estrus than cows with no signs of luteal activity. Treatment affected the estrous response and the interval from PRID removal to estrus but did not affect conception rates 28–34 days post AI. Primiparous cows displayed a better estrous response than multiparous cows. Our findings reveal acceptable results of 5-day P4-based protocols for AI at estrus in high-producing dairy cows. Time from treatment to estrus emerged as a good guide for FTAI after a 5-day P4-based synchronization protocol.     

马尾松木荷混交林林分结构和土壤肥力研究

对马尾松木荷混交林与马尾松纯林林分生长、径阶分布及土壤理化性质研究表明 :马尾松与木荷以 2∶1比例行状混交 ,马尾松生长快 ,林分各径阶呈正态分布 ,林分生产力高、结构稳定。马尾松木荷混交林不仅提高土壤通透性和蓄水性 ,促进土壤良好结构形成 ,而且增加土壤养分含量 ,改善土壤肥力状况     

空气湿度对澳洲坚果开花座果和果实生长的影响

花期的澳洲坚果植株随着空气湿度的降低,其花粉育性降低、座果率及光合产物(叶绿素含量、总糖含量和淀粉含量)下降、幼果生长速度减慢。试验结果表明:空气湿度的降低导致叶片光合作用能力下降,干物质积累少,生物产量降低,花粉萌发率低、花粉管生长速度慢,造成花期不遇、授粉受精不良、座果率低,最后造成产量降低。不同品种受空气湿度胁迫的影响程度不同,品种的内部生理特性、花粉育性以及产量都存在差异。澳洲坚果生长的适宜空气湿度为日平均空气湿度在50%以上。     

不同肥力水平下种植密度对浚单29产量性状及产量的影响

[目的]探寻浚单29不同肥力水平地区的适宜种植密度。[方法]研究在高产田与一般田2种肥力水平下浚单29种植密度与产量及其相关产量性状的关系。[结果]2种肥力水平下通过种植密度变化影响穗部性状来影响产量,相同密度,一般田肥力水平下,密度对穗部性状影响大于高产田对穗部性状影响。[结论]在一般田肥力水平下,浚单29最适宜密度为6.75万株/hm2,高产田肥力水平下,浚单29最适宜密度为7.50万株/hm2。     

Use of a process-based model to describe spatial variation in Pinus radiata productivity in New Zealand

The process-based model CenW was used to model the growth of Pinus radiata in New Zealand. The model was parameterised by comparison with data from 101 permanent sample plots, consisting of 1309 individual observations of stands at different ages of up to 32 years. The data covered the range of conditions under which P. radiata is grown in New Zealand. Observations consisted of stand density, and height and/or basal area. Input parameters consisted of site water-holding capacity, soil texture and soil nitrogen concentration, and daily records of minimum and maximum air temperatures, precipitation, solar radiation and atmospheric humidity. Using the same plant parameters for the full data set from all locations, we obtained excellent correspondence between predictions and observed data. Model efficiencies ranged from 0.828 to 0.892 for four growth indices that were either directly observed (height, basal area) or derived from the data (stand volume, mean stem diameter).Within New Zealand, stand productivity was found to be particularly sensitive to mean annual air temperature and mean total annual precipitation, with optima reached from 12-15 °C and 1500-2000 mm, respectively. Productivity exhibited little sensitivity to site fertility as soil nutrition was generally adequate for most sites. Spatial projections showed highest productivity in the moderately wet, warm northern and western regions of the North Island and lowest for cold sites at higher elevation, dry eastern areas of the South Island and the extremely wet sites on the West Coast of the South Island. The model runs provided robust estimates of productivity across the diverse environmental conditions in New Zealand.     

稻草还田对红壤性水稻土肥力的影响

通过对稻草还田的长期（10年以上）定位试验研究表明，稻草还田后土壤有机质和有机无机复合体数量提高了，土壤主要物理性质与结构得到进一步改善，土壤速效钾、速效磷、有效磷、全氮含量也都有比较大的提高，土壤酶活性增强，生产力提高，水稻增产。稻草直接还田模式省工增效，目前生产上利用比较多，但也存在稻茬影响农民田间作业，腐解产生有机酸、微生物与秧苗争肥，传播病害等缺点，稻草堆沤还田可有效解决以上问题，但堆沤时要占场地，花工比较大，且这两种还田模式都没有充分利用稻草中的粗蛋白和生物质能，所以稻草利用应该向物质循环利用、能量多级转换模式转变。