基于Hertz接触理论的黑水虻幼虫碰撞恢复系数测定

为建立黑水虻幼虫与收集、输送、分离等机械工作部件间发生碰撞时的碰撞模型，基于黑水虻幼虫生物特性，应用Hertz弹性碰撞理论推导了黑水虻幼虫碰撞过程动力学方程，结合运动学方程原理构建了黑水虻幼虫恢复系数的测定装置并进行了黑水虻幼虫恢复系数测定试验。试验针对第5龄期的黑水虻幼虫，采用L16(44×23)混合正交试验方案研究了碰撞材料、材料厚度、下落高度、碰撞角、跌落方向、含水率等因素对黑水虻幼虫恢复系数的影响，然后对碰撞材料、材料厚度、下落高度、碰撞角、跌落方向进行单因素试验，并获得了材料厚度、下落高度、碰撞角对恢复系数的影响规律与回归方程，且方程的决定系数均不小于0.9427。试验结果表明，影响黑水虻幼虫恢复系数的因素影响由大到小为：碰撞材料、下落高度、碰撞角、跌落方向、碰撞材料厚度、含水率，其中含水率对恢复系数影响不显著。单因素试验结果可得：黑水虻幼虫与Q235钢、铝合金、有机玻璃、橡胶等碰撞材料间的恢复系数依次降低，随下落高度的增大而逐渐减小，随材料厚度的增加而逐渐增大，恢复系数随碰撞角的增大而整体呈增大趋势，且横向跌落方向大于纵向跌落方向。该文研究结果可为黑水虻幼虫收集、输送、分离等机械相关工作部件优化设计提供参考依据。     

小麦山农4143抗黑胚病遗传分析及抗性遗传位点检测

 黑胚病是小麦生产的重要籽粒病害,麦根腐平脐蠕孢(Bipolaris sorokiniana)是黑胚病的主要致病菌。为分析小麦抗黑胚病遗传规律并检测抗性位点,本研究以抗黑胚病小麦品系山农4143与感病品系宛原白1号的F₇代重组自交系(RIL)群体为材料,于2018~2019年在3个试验点种植,采用“孢子液喷洒、套袋保湿”的方法进行接菌鉴定,用“主基因＋多基因混合遗传模型”进行遗传分析,并挑选极端抗、感自交系构建混池、结合小麦660K SNP芯片进行混合分组分析(BSA)。研究结果显示小麦品系山农4143对黑胚病抗性符合“4对主基因加性-上位性遗传模型”,主基因遗传力为0.88~0.95;通过BSA检测到黑胚病抗性位点36个,分别位于1A、2B(6)、2D(2)、3A、3B(2)、3D、4A(6)、4D、5A(4)、5B(6)、5D(3)、7A、7B和7D共14条染色体上,A、B、D染色组上分别为13、 15和8个,36个位点中有18个为抗黑胚病新鉴定位点。本研究结果为小麦抗黑胚病位点的精细定位和抗性育种中分子标记的开发奠定了基础。     

基于PhotoScan的径流小区三维重建参数优化

提高径流小区数字地面模型精度是应用三维重建技术研究面蚀细沟间与细沟侵蚀过程的关键。以位于黑龙江省海伦市的中国科学院海伦水土保持监测研究站的裸地小区为研究对象，以验证点与控制点误差比和数字高程模型（Digital elevation model，DEM）误差为指标，优化Agisoft PhotoScan三维重建径流小区的处理参数，降低DEM误差。PhotoScan的精度参数和相机模型设置对DEM误差有较大影响。优化后的验证点与控制点误差比降低35%，改善了径流小区DEM对地面控制点的过度拟合。优化后的相机模型包含焦距、像主点、径向畸变、切向畸变等。基于单点和点云的验证结果表明，优化过程误差降低约40%。相对于默认参数设置下的验证点误差（20.0mm），优化后的验证点误差为11.0mm，与细沟侵蚀深度标准相当（沟深大于等于10mm），因此优化后的径流小区三维重建过程更适宜于细沟侵蚀过程的三维表达。     

核桃细菌性黑斑病杀菌剂筛选及药效研究

本文以黄单胞杆菌Xanthomonas campestris pv.juglandis(Pierce Dowson)为供试菌株,选用不同浓度的13种杀菌剂进行室内毒力测定。结果表明:有10种药剂对该菌有一定的抑制效果,但只有5种杀菌剂能够产生明显的抑菌圈。其中,四霉素和链霉素的抑菌效果最强,最低抑菌浓度为0.165、3μg/mL,抑菌率为74.76%、69.23%,EC_(50)为12.764、35.318μg/mL。其他依次为乙蒜素、中生菌素和春雷霉素。选用这5种杀菌剂进行盆栽防治试验,四霉素和链霉素的平均防效达74.60%、71.69%,乙蒜素和中生菌素防效分别为65.98%、58.40%,春雷霉素防效最低为39.38%。其结果与室内基本一致。室内试验及盆栽试验结果表明四霉素、链霉素、乙蒜素、中生菌素和春雷霉素可作为防治核桃黑斑病的杀菌剂,其中四霉素为首选杀菌剂。     

Three SNPs within exons of INHA and ACVR2B genes are significantly associated with litter size in Dazu black goats

The aim of this study was to analyse the association between single-nucleotide polymorphisms within INHA and ACVR2B and litter size in Dazu black goats. In total, twenty-two SNPs were genotyped in 190 individuals by SNaPshot and resequencing. The results showed that three SNPs (SNP_1, SNP_12 and SNP_13 in this study) were detected to have significant additive genetic effect on the recorded goat litter size (p < .05). The SNP_1 (NC_030809.1), a non-synonymous substitution of G for T at chr2-g. 28314990 in the exon 2 of INHA gene (NM_001285606.1), resulted in homozygote 2 (HOM2) contributed 0.25 and heterozygote (HET) contributed 0.12 larger litter than homozygote 1 (HOM1). Meanwhile, SNP_12 (Chr22-g. 11721225 A > T) and SNP_13 (Chr22-g. 11721227 A > C) (NC_030829.1) simultaneously mutated at the first and third position of a triplet AAA (lysine, K) in the exon 4 of ACVR2B gene (XM_018066623.1) had estimated genetic effects of HOM1 (0.00) and HOM2 (0.03) larger than HET (−0.12). In conclusion, one SNPs (chr2-g. 28314990 T > G) within the exon 2 of INHA and two SNPs (Chr22-g. 11721225 A > T and Chr22-g. 11721227 A > C) i n the exon 4 of ACVR2B gene were highly recommended as candidate markers of litter size in Dazu black goats. A large-scale association study to assess the impact of these variants on litter size is still necessary.     

山下黑猪与鲁莱黑猪正反交F1代杂种优势的估计

旨在估计山下黑猪和鲁莱黑猪正反交F₁代杂种优势，筛选出合适的杂交方式，以提高优质肉猪的生产效率，满足人们对于优质猪肉的需求。本研究在山下黑猪（164头）和鲁莱黑猪（69头）及其正（6头山下黑猪♂×25头鲁莱黑猪♀）、反（3头鲁莱黑猪♂×35头山下黑猪♀）交4个群体中测定了生长肥育、体尺外貌（75～110 kg）、繁殖和胴体肉质（90～115 kg）4大类共43个性状，比较了这些性状在群体间的差异，并估计了正反交F₁代的杂种优势。结果表明，山下黑猪的生长肥育和体尺性状较好，鲁莱黑猪的繁殖和肉质性状较好，正反交群体介于它们之间。正交群体的繁殖性能优于反交群体，但生长肥育性能比反交差。由于这4个群体的母猪都是纯种，因此繁殖性状没有表现出明显杂种优势。除膘厚、胸椎数、45 min pH和剪切力无显著的杂种优劣势外，大部分胴体性状和肉质性状有明显的杂种劣势。生长肥育性状的杂种优势在正反交群体中的表现不一致，反交群体表现出显著杂种优势，而正交则无明显的杂种优势。本研究估计了山下黑猪和鲁莱黑猪正反交的杂种优势，为筛选山下黑猪和鲁莱黑猪的最佳杂交方式奠定基础。     

Effects of commercial thinning,log position in the stem,and cutting width on the surface quality of cants produced by a chipper-canter

Fifteen stems of jack pine (Pinus banksiana Lamb.) of 3 commercial thinned plots (control, moderate, and intensive thinning) and 15 stems of black spruce (Picea mariana (Mill.) B.S.P), both coming from the Abitibi-Témiscamingue region – Canada, were cross-cut into three 2.4?m length sections: bottom, middle, and top logs. Logs were processed with a chipper-canter at three cutting widths (12.7, 19.1, and 25.4?mm), producing chips and a three-faced cant. The middle section of the cant was used to evaluate surface quality across the grain on each face. Roughness and waviness parameters and depth of torn grain were recorded. Knot characteristics were assessed in the three cant faces. Poorer surface quality was found in the lower part compared to the upper part of the cant for both species. At larger cutting widths, jack pine logs coming from a natural stand showed lower surface quality compared to logs from thinned stands. Black spruce waviness increased with the cutting width and stem height. These results were attributed to the increase of forces and vibration when cutting at larger cutting widths, which was worsened by the presence of bigger, more numerous knots at the control plot and in the top logs. Black spruce had deeper torn grain compared to jack pine. Their differences in knot characteristics resulted in a maximum torn grain depth favored by the presence of more knots rather than by bigger knot size. Other knot characteristics, such as the position of the knots in the cant face, the insertion angle of the branch and the distribution of the knots around the log, should be studied to better understand the relationship between torn grain formation and knottiness.     

Cu2+和Zn2+在土壤电场中的极化对黑土胶体凝聚的影响

金属离子在土壤胶体固-液界面上的行为差异引起土壤胶体絮凝过程的差异,并深刻影响土壤溶液中养分或污染物的迁移转化。为明确Cu~(2+)和Zn~(2+)两种金属离子界面行为对土壤胶体凝聚的影响,本文选取黑土胶体为研究对象,利用动态/静态光散射技术研究专性吸附离子Cu和Zn体系中不同离子浓度条件下黑土胶体的凝聚行为。结果表明:(1)Cu~(2+)和Zn~(2+)两种金属离子引发黑土胶体凝聚的机制相似,均是低浓度下的慢速凝聚和高浓度下的快速凝聚,达到快速凝聚机制后,胶体的总体平均凝聚速率受离子种类影响较小。(2)Cu~(2+)对黑土胶体聚沉能力大于Zn~(2+),Zn~(2+)的临界聚沉浓度是Cu~(2+)的3.51倍,在黑土胶体的凝聚过程中存在强烈的离子特异性效应。(3)两种离子体系中颗粒间相互作用的活化能差异随离子浓度的降低而增大。此两种离子在凝聚作用的较大差异性源于Cu~(2+)较Zn~(2+)对有机配位体有较强的亲和力,以及黑土胶体表面附近强电场对离子的强烈极化作用扩大了两种离子本身的微小差异。     

基于SSR分子标记的Nicotiana tobacum–N.plumbaginifolia异源染色体植株的鉴定与筛选

以烟草(Nicotiana tabacum)品种云烟87的八倍体(2n=8x=96)和野生烟草N. plumbaginifolia (2n=2x=20)的基因组DNA为模板,对340对烟草SSR引物进行筛选以获得能扩增多态性条带的引物。利用多态性引物对种间杂交后代及190株回交后代的基因组DNA进行扩增,并对N.plumbaginifolia中的SSR标记的连锁情况进行简要分析。经筛选获得了多态性引物29对。结果显示,在190株后代中, 159株的基因组DNA能扩增出N. plumbaginifolia的特异SSR位点,可以判定该159株为N. tabacum的N. plumbaginifolia异源染色体植株,其余31株植株可能不含有N. plumbaginifolia的染色体。经UPGMA聚类分析,本群体中植株的遗传多样性较为丰富,部分分子标记在后代中的出现具有完全相关性。29个标记中14个可确定来源于5条不同染色体,N.plumbaginifolia的29个位点在回交后代中的扩增效率并不相同,且效率均较低(低于31.00%),说明该杂种中N. plumbaginifolia基因组的垂直传递效率较低。利用SSR分子标记可以判定云烟87八倍体与N.plumbaginifolia杂交获得的后代为真杂种,且自该远缘杂种回交后代中筛选获得大量异源染色体植株。这些结果和筛选获得异源染色体植株为进一步创制N.tabacum-N.plumbaginifolia抗黑胫病单体附加系以及易位系奠定了基础。