花粉管通道法转基因抗虫棉外源基因的整合方式

对花粉管通道法培育的转Bt基因抗虫棉GK19、GK22、1016、1018、1022、1025、GK5、GKsu12和SGK1进行Southern杂交分析。结果表明,目的基因能够完整整合到基因组里,HindⅢ酶切位点有可能发生甲基化或丢失。除1018以外的上述8个抗虫棉的分析结果还表明,载体骨架没有整合到棉花基因组中。     

果树自交不亲和性的遗传与生理机制及其研究

在简要介绍植物（包括果树）自交不亲和性与生理控制机制的基础上，着重对梨、苹果、杏等果树自交不亲和性的研究进行了综述，内容包括花柱内花粉管生长特点、花柱S糖蛋白的特性与作用机理以及果树自交不亲和的分子生物学研究，并提出了该领域有待研究的问题。     

苹果试管苗不定根起源及其发育状况的研究

利用光学和扫描电子显微镜观察结果表明,经琼脂生根培养基诱导产生的长富—2苹果 (Malus pumila Mill.) 试管苗的不定根起源于维管形成层。这种不定根发育不良,根表面缺乏根毛,内部解剖构造为典型的初生结构。为避免因不定根吸收、运输能力差而影响试管苗移栽成活,宜采用通透性良好的基质进行瓶内或瓶外生根,可诱导出优质不定根。     

Capnographic documentation of nasoesophageal and nasogastric feeding tube placement in dogs

Objective: To evaluate the ability of capnography to document proper placement of nasoesophageal (NE) and nasogastric (NG) feeding tubes. This study was conducted in 3 phases. Phase I of this study was designed in order to test the efficacy of capnography to distinguish placement of a feeding tube in the alimentary tract versus the respiratory tract. Phase II was designed in order to document that carbon dioxide (CO₂) could be measured through a polyvinyl chloride (PVC) feeding tube. Phase III was performed in order to evaluate the technique of continuous monitoring during insertion of the feeding tube into the esophagus and stomach as would be performed during a clinical‐tube placement. Design: Prospective study. Setting: Research laboratory. Animals: 24 adult dogs. Interventions: In Phase I, sedated dogs were instrumented with an intratracheal catheter and an 8 French feeding tube placed nasally into the distal esophagus and later advanced into the stomach. In Phase II, dogs were anesthetized and an 8 French feeding tube was placed down the endotracheal tube, then into the esophagus and later advanced into the stomach. In Phase III, sedated dogs were instrumented with an 8 French feeding tube inserted intranasally and then advanced to the level of the nasopharynx, distal esophagus and, lastly, the stomach. Fluoroscopy was used in order to determine location of the feeding tube. Measurements and main results: Phase I measurements included respiratory rate and CO₂ from the trachea, esophagus, and stomach and pH of gastric fluid sample. Phase II measurements included respiratory rate and CO₂ from the endotracheal tube, feeding tube in the endotracheal tube, feeding tube in the distal esophagus, and feeding tube in the stomach. Phase III data collection included respiratory rate and CO₂ as the tube was passed through the nasal cavity, nasopharynx, esophagus and stomach. Phase I fluid samples were collected from 5 of the 9 dogs and had pH values from 1.68 to 4.20. In both phases, values for the respiratory rate and CO₂ from the esophagus and stomach were 0 ± 0, significantly lower (P < 0.001) than the values from the trachea. In Phase II, there was no significant difference between the respiratory rates (P = 0.886) and CO₂ (P = 0.705) readings obtained from the endotracheal tube compared to readings from the feeding tube in the endotracheal tube. In Phase III, there was a significant difference (P < 0.001) between the respiratory rates and CO₂ readings obtained from the nasal cavity and the nasopharynx when compared to those readings obtained from the esophagus and stomach. Measurement of CO₂ and respiratory rate resulted in a reading of 0 every time the feeding tube was in the esophagus or stomach. Conclusions: Capnography may be used in order to detect airway placement of NE and NG tubes.     

钢管混凝土拱桥的施工监控技术

钢管混凝土是由混凝土填入薄壁钢管而形成的一种组合材料。在桥梁结构上,钢管混凝土主要应用于拱桥。目前,大跨度钢管混凝土拱桥主要采用缆索吊装-斜拉扣定施工新技术,拱桥的线形通过实测每节钢管拱的标高及拱轴线位置,并借助扣索实施动态调整来保证。为此,介绍了钢管混凝土拱桥施工过程的监控技术,从而指导施工,以确保拱桥建成后满足设计要求。     

苹果自花授粉的花粉管结构变化及S-RNase定位

 苹果‘红星’品种授粉处理24 h后, 自花授粉比异花授粉的花粉管生长缓慢。授粉处理48 h后, 可观察到自花授粉花柱通道组织的花粉管内有二裂粒子增加、管壁破裂和管内物质溢出、外层管壁增厚等现象。苹果气球状花期未授粉的花柱及自花和异花授粉24 h后且无花粉管存在的花柱切片显示, S-RNase位于花柱通道组织的细胞内。自花和异花授粉48 h后有花粉管通过的花柱切片显示, S-RNase位于花柱通道组织的细胞间隙和花粉管内。     

香菇烂筒病因与综合防治研究

本文通过对香菇烂筒重灾区进行生态环境、气象、植保等方面调查，应用微生物分离技术，对烂筒样品和土壤样品进行致烂菌的分离、筛选和回接试验，从中确定致烂菌菌株的分类地位和基本生物学特性，从而研制防治香菇烂筒的生态、物理和药物防治技术，提出综合治理措施。     

卧式泵站直管式出水流道型线变化水力性能数值模拟

基于不可压缩流体的连续性方程和雷诺时均N-S方程,采用CFD技术对卧式泵站直管式出水流道进行数值模拟计算,通过改变出水流道型线,分析出水流道内部流动特性及水力损失影响。研究表明,出水流道当断面形状设计为圆变方,在平面方向和立面方向均逐渐扩大的形式时,流道内流态最好;将进水流道断面在平面方向设计为先扩散后平直,而在立面方向均匀扩大的形式时,流态较好;而将断面在立面与平面方向均设计成先扩散后平直时,出水流道流态最差。     

迎春花试管培养技术的研究

旨在研究不同培养条件对迎春花不定芽再生和生根状况的影响,并筛选出最适培养条件。以迎春花带芽茎段为材料,通过诱导愈伤组织、愈伤组织分化新芽、芽生根等步骤建立迎春花离体快速繁殖体系。研究结果表明,适合迎春花愈伤组织诱导的培养基为WPM+3.0 mg/L6-BA+0.5 mg/LNAA,诱导率高达100%;适合迎春花芽伸长诱导的培养基为WPM+2.0 mg/L6-BA+0.5 mg/LNAA,诱导率达56.8%;适合迎春花生根诱导的培养基为1/2 WPM+0.5 mg/L NAA,生根率高达85%,根系发达,试管苗生长健壮。培养条件为光照强度1500 lx,光照时间12 h/d,温度25℃。植物生长调节剂种类及质量浓度对迎春花不定芽的出芽时间和再生率以及生根率有明显影响。