入射角度对气力射播小麦种粒入土参数影响的试验研究

针对稻麦轮作区黏湿土壤条件下的小麦机械化播种,为避免传统接触式小麦播种技术存在的粘附堵塞严重和作业阻力、功耗大等问题,该文采用非接触式小麦气力射播技术理论,通过自制的小麦气力射播试验台,开展整洁种床土壤条件下入射角度对气力射播小麦种粒入土参数影响的试验研究。试验结果表明:随着入射角度的增加,相同加速气压下小麦种粒的射播速度垂直分量和射播深度不断增加,小麦种粒触土后产生水平滑移和弹跳的几率变小,且各入射角度下射播深度与射播速度呈正相关关系,不同入射角度下小麦种粒呈现出不同射播深度和土壤冲击效果,小麦种粒未产生损坏情况;当入射角度≥45°和射播速度垂直分量≥25 m/s时,小麦种粒可被完全射播入土壤中且出苗率大于86%,90°入射角度下的射播效果最好。同时,为实现田间作业时小麦种粒的垂直射播入土,应使射播速度水平分量与机具作业速度相等且射播速度垂直分量≥25m/s。试验结果可为非接触式小麦射播装备的研制提供基础数据和技术支撑。     

播期对直播水稻产量、花后各器官干物质和氮素积累及转运的影响

为探究播期对直播水稻产量、花后干物质和氮素积累与转运的影响,以水稻品种白粳1号、长白9号和龙粳31号为供试材料,设置3个播期（SD1、SD2和SD3）,比较不同播期条件下3个品种的产量、抽穗期和成熟期各器官干物质及氮素积累与转运特点。3个品种抽穗期和成熟期各器官干物质及氮素积累量、抽穗至成熟期各器官干物质及氮素转运量和产量均表现为SD2>SD3>SD1。相关分析表明,产量与成熟期穗干物质及氮素积累量呈显著正相关,与叶片干物质和氮素转运量呈显著正相关。在本试验条件下,播期的推迟提高了3个品种有效穗数及结实率,进而提高了产量,同时促进了各器官物质转运量与转运率的提高。各品种SD2处理的产量及花后干物质、氮素积累量最高,SD2为适宜播期。     

Marker‐assisted breeding for improvement of anaerobic germination in japonica rice (Oryza sativa)

Direct seeding is increasingly being practiced in rice cultivation areas because it saves labour and reduces cost of production and management. In this study, four japonica‐type breeding lines were developed from a cross of a japonica cultivar and an AG‐tolerant donor, KHO, using marker‐assisted selection. Validation of the target genes AG1 and AG2 in the selected lines was examined by PCR analysis and the background recovery rate by the recurrent parent was confirmed by genotyping using a 6K SNP chip. Compared to the recurrent, the survival rates of the selected lines were improved in a range from 33% to 115% in three conditions; in particular, the survival rate was increased in more than twice that of the recurrent parent under the hypoxic condition. The main agronomic trait, yield and quality‐related traits were similar to those of the recurrent parent. The use of these lines will contribute to the expansion of the cultivation area due to the proven economic benefits of direct seeding in Korea.     

安徽省不同区域油菜对氮肥一次性施用方式的响应

研究油菜氮肥一次性施用条件下,不同油菜产区适宜的氮肥施用方式及其在不同栽培方式上的差异,为油菜轻简化施肥提供依据。2010~2011年度在安徽省江淮和沿江油菜主产区布置移栽油菜和直播油菜的不同氮肥施用方式田间试验。结果表明,一次性基施氮肥180 kg/hm2的条件下,相同施肥方式时移栽油菜较直播油菜获得更高的产量和氮素积累。扣除移栽劳动力成本后,直播油菜在江淮地区获得较高经济效益,沿江地区移栽油菜和直播油菜效益接近。在江淮地区,移栽油菜和直播油菜均以氮肥集中施用(移栽油菜穴施、直播油菜条施)的方式获得最高产量、最大氮积累量和最优氮肥利用效率;在沿江地区则是氮肥撒施后翻耕和氮肥集中施用两种施肥方式。因此,相同施肥方式下,直播油菜虽产量较移栽油菜低,但经济效益却没有明显下降,是油菜轻简化生产的发展方向。氮肥集中施用是江淮地区的最优施肥方式,氮肥撒施后翻耕和氮肥集中施用是沿江地区的较佳选择,但选择合适的施肥方式时仍需因地制宜。     

不同水分管理旱直播水稻生长生理与节水效应

为了探讨东北黑土区水稻高效节水种植模式,于2017年在黑龙江省庆安县采用测坑微区试验,研究了旱直播对水稻光合特性、各器官生物产量、干物质累积速率、根冠比、伤流强度、产量水分利用效率(WUEy)、叶片水分利用效率(WUEl)和产量因子等的影响。试验设置了3个处理:滴灌旱直播(DH)、漫灌旱直播(MH)和常规插秧淹灌(CK),并以CK处理作为对照。结果表明:DH与MH处理的净光合速率Pn(分蘖末期除外)、蒸腾速率Tr、气孔导度Gs、以及叶、鞘、茎、穗等冠部干物质累积量、冠部干物质累积速率(分蘖中期至末期除外)、冠部最大累积速率在整个生育期均低于CK,但WUEl、根部干物质累积量(分蘖前期和中期除外)、根部干物质累积速率、根系活力(分蘖中期与拔节孕穗期除外)均高于CK。3个处理的胞间CO2浓度Ci整个生育期波动幅度不大。根部和总干物质最大累积速率及各生育期根冠比以DH最大,CK最小。DH与MH处理的千粒质量和结实率较CK下降不显著(P0.05),穗长和穗粒数下降显著(P0.05),有效穗数上升显著(P0.05)。DH较CK、MH分别节省灌溉用水63.88%和39.52%,WUEy分别提高2.66倍和1.64倍。滴灌旱直播种植不仅大幅度减少了灌溉用水量,显著提高了水稻的WUEy,而且具有较为可观的经济效益和显著的社会效益。研究结果可为东北黑土区水稻种植模式的选取提供技术支撑,对保障黑土区农业水土资源可持续利用具有重要意义。     

Integrated Evaluation and the Physiological and Biochemical Responses of Semi-Wild Cotton under Complex Salt-Alkali Stress

[Objective] The genetic diversity of semi-wild cotton was abundant, so more new elite resistant genes could be found and applied to improve the resistance of cotton. The aim of this study was to primarily study on the regulation of response to salt-alkali stress, explore the method of integrated evaluation and characterize the resistance of semi-wild cotton. [Method] Four semi-wild and two cultivated Gossypium hirsutum accessions were evaluated for phonotypical, physiological and biochemical traits under alkali-salt versus normal conditions in hydroponic solutions. The alkali-salt tolerance was determined based on principal component analysis, cluster analysis, correlation analysis, grey rational analysis and analysis of variance. [Result] On the basis of the overall results, the alkali-salt stress tolerance of the six accessions was ranked as: Marie-galante85 > Latifolium32 > CRI16 > CRI12 > Latifolium40 > Latifolium130. Roots were found to be the most important responsive systems to complex alkali-salt stress. At seedling growth stage, the active scavenging system played a crucial role in response to alkali-salt stress. In addition, the salt tolerant and salt sensitive accessions showed different response tends towards leaf peroxidase, root ascorbate peroxidase and root catalase within 48 h, suggesting the accessions have different levels of response to salt stress. [Conclusion]Our study identified the most alkali-salt tolerant accessions and provided basic concept of complex alkali-salt tolerance mechanism within cotton accessions. And, our study provided a simple and rapid, highly accurate and precise method for evaluating salt resistance of cotton, and proved that the balance of ROS system play an important role in response to salt-alkali stress. Hence, mining of salt tolerant genes from these accessions may facilitate the development of novel salt tolerant variety.     

播种量和品种对紫花苜蓿分枝数和株高的影响

采用裂区设计,以播量(15.0,22.5,30.0kg/hm~2)为主区,8个不同秋眠级紫花苜蓿品种为副区,研究其对植株分枝数和植株高度的影响,旨在为紫花苜蓿生产提供科学依据。结果表明,1)苜蓿的播种量不同对其1、2级分枝数均无显著差异,且不同品种之间分枝数差异也多不显著;从不同年度看,不同品种的1、2级分枝数均表现出2014年2013年2012年的变化趋势。2)不同品种间2级/1级分枝数比值,2012和2013年之间差异不显著,但绝大部分显著高于2014年。3)播种量对植株高度有一定影响,大部分品种的植株高度表现出30.0kg/hm~222.5kg/hm~215.0kg/hm~2的趋势。因此,适当减少紫花苜蓿播种量对1、2级分枝数没有影响,但提高了植株高度。     

Cover crop and plant density in seed production of white clover (Trifolium repens L.)

Seed crops of white clover (Trifolium repens L.) are usually established with a cover crop. Provided sufficient light, white clover may compensate for low plant density by stoloniferous growth. Our objectives were (1) to compare spring barley or spring wheat used as cover crops for white clover and (2) to find the optimal seeding rate/row distance for white clover. Seven field trials were conducted in Southeast Norway from 2000 to 2003. Barley was seeded at 360 and 240 seeds m^?2 and wheat at 525 and 350 seeds m^?2. White clover was seeded perpendicularly to the cover crop at 400 seeds m^?2/13 cm row distance or 200 seeds m^?2/26 cm. Results showed that light penetration in spring and early summer was better in wheat than in barley. On average for seven trials, this resulted in 11% higher seed yield after establishment in wheat than in barley. The 33% reduction in cover crop seeding rate had no effect on white clover seed yield for any of the cover crops. Reducing the seeding rate/doubling the row distance of white clover had no effect on seed yield but resulted in slightly earlier maturation of the seed crop.     

杂交稻低播量精量播种育秧及机插取秧特性

【目的】明确杂交稻70 g以下低播量精量穴播和条播对育秧效果及机插特性的影响,突破生产中杂交稻机插的技术瓶颈。【方法】以中浙优1号和甬优1540两个杂交稻品种为材料,利用机插标准9寸盘,设置机械穴播和条播两个精量播种方式,并以机械流水线撒播为对照,穴播规格为16(纵向)×34(横向)穴,条播为纵向16条,以穴播5粒、3粒及2粒的播种量进行播种试验。考查了低播量下不同播种方式对秧苗生长影响及配套取秧效果【结果】1)低播量下不同播种方式对秧苗成苗率的影响不大。2)降低播种量提高秧苗生长一致性,且穴播和条播秧苗生长一致性好于撒播。3)与撒播相比,精量穴播和条播能够在低播量下提高秧苗根系盘结力和成毯性,中浙优1号和甬优1540根系盘结力比撒播平均高75.4%和81.0%,播量每穴3粒时即能有效成毯,穴播和条播差异不大。4)精量穴播和条播能够显著降低低播量下机插漏秧率,中浙优1号和甬优1540机插漏秧率平均分别比撒播低76.3%和74.6%,穴播和条播下,两个品种每穴播量3粒的漏秧率均在1%以下,与撒播相比降幅在10个百分点以上。5)精量穴播和条播机插取秧苗数均匀度比撒播要好,两个品种预期取秧2~5苗(5粒)、1~3苗(3粒)和1~2苗(2粒)比例均达80%以上,中浙优1号和甬优1540机插苗数均匀度平均比撒播高121.2%和67.0%,其中,穴播机插取秧苗数均匀度及预期取秧苗数比例高于条播。【结论】精量穴播和条播可以解决目前杂交稻机插用种量大、漏秧率高和机插取秧苗数均匀度差的问题。     

勺夹式蚕豆精量排种器设计与试验

为提高蚕豆机械化播种质量，解决蚕豆精量播种难题，结合勺轮式排种器和指夹式排种器的优点，设计了一种勺夹式蚕豆精量排种器。根据蚕豆种子物理特性，分析确定了种盘工作区域范围、弧形滑道结构参数、种夹机构参数以及托种板关键参数。以种夹长度、种夹宽度和弯折角为试验因素进行了3因素3水平正交试验，通过试验确定了种夹较优参数组合为种夹长度15.5mm，种夹宽度10mm，弯折角35°，在较优参数组合下本排种器的株距合格指数为 95.11%、漏播指数为1.61% 、重播指数为 3.28% ，满足设计要求，为蚕豆精量排种器的设计提供理论指导。