数值模型结构不确定性对模拟结果的影响分析

以内蒙古鄂托克旗为例,基于GMS中的MODFLOW模块构建了地下水流数值模拟模型,分析了模型结构(含水层厚度、参数分区)与模型参数不确定性因素对模拟结果的影响.研究结果表明:含水层不确定情景(含水层下边界概化为隔水底板平均值870 m)与实际情况水头差值绝对值的累计和最大为701 m,对模拟结果起了主控作用;当含水层下边界概化为910,940 m时,累计和分别增加为1 013,1 593 m;与仅考虑单个不确定性因素相比,同时考虑模型参数与含水层不确定情景累计和最大为738 m,同时考虑参数分区与含水层不确定情景累计和最大为791 m.因此,在构建地下水流数值模拟模型时,应优先考虑含水层空间结构概化的合理程度,同时考虑多个不确定性因素对模拟结果的综合影响,使地下水数值模拟模型能更精确地反映真实的地下水流状况.     

圈养华南虎血液生化指标正常参考值初步研究

以国内部分圈养的健康华南虎Panthera tigris amoyensis作为研究对象,通过收集华南虎血液生化报告和采集华南虎血液样本检测建立样本数据,血样检测采用自动血液生化分析仪干式试剂片生化技术测定,测定血液生化指标包括血糖(GLU)、总蛋白(TP)、总胆固醇(CHOL)、总胆红素(TBIL)、肌酐(CREA)等。得到华南虎血液生化共38项指标的正常参考值范围(95%概率),其中几项主要指标正常值范围如下:GLU(2.82-11.55)mmol/L、TP(56.58-85.93)g/L、CHOL(3.32-8.66)μmol/L、TBIL(0-5.30)μmol/L、CREA(52-349)μmol/L等。统计结果显示,雌雄华南虎间血液生化指标的部分项目有差异(P <0.05),幼龄组和成年组间各项生化指标差异不显著(P >0.05),与其他虎亚种相关血液生化报道的生化指标部分有差别。华南虎血液生化指标正常参考值范围不同于其他虎亚种,建立华南虎血液生化指标正常值对华南虎的饲养管理、疾病诊治预防和保育繁殖研究工作有重要作用。     

Australian Uromyces viciae-fabae: Host and nonhost interaction among cultivated grain legumes

Uromyces viciae-fabae, rust of faba bean, parasitizes other legume crops such as lentils (Lens culinaris) and field peas (Pisum sativum) in some environments. In this study we examined the host range of two Australian isolates of U. viciae-fabae collected and purified from a faba bean crop and classified as U. viciae-fabae ex V. faba. Field pea (P. sativum), chickpea (Cicer arientinum), lupin (Lupinus spp.), lentil (L. culinaris), and mung bean (Vigna radiata) genotypes were tested with these isolates, as well as resistant and susceptible genotypes of the faba bean host. Race specificity for these two pathogen isolates was observed on Vicia faba, with two faba bean genotypes showing partial resistance. Both U. viciae-fabae isolates also colonized field pea seedlings and successfully produced uredinia under glasshouse conditions, despite this fungus not being known as a pathogen of Australian field pea crops. No sporulation of either isolate of U. viciae-fabae ex V. faba was observed on any of the remaining legume species tested. However, obvious differences in fungal growth were observed, ranging from small infection sites with very rare haustorium formation in mung bean to more extensive growth and the development of potential uredinial structures in chickpea. These observations are discussed in relation to the phylogenetic relationship of these host and nonhost species.     

Threats to at-risk salmonids of the Canadian Rocky Mountain region

Trout and charr, members of the salmonid family, have high conservation value but are also susceptible to anthropogenic threats in part due to the specificity of their habitat requirements. Understanding historical and future threats facing these species is necessary to promote their recovery. Of freshwater trout and charr in the Canadian Rocky Mountain region, westslope cutthroat trout (Oncorhynchus clarkii lewisi), bull trout (Salvelinus confluentus; a charr species) and Athabasca rainbow trout (Oncorhynchus mykiss) are of conservation concern. And indeed, range contractions and declining populations are evident throughout much of their ranges. Range contraction was most evident in the southern Alberta designatable unit (DU) of westslope cutthroat trout. Diminished populations were also evident in the downstream watersheds of the Alberta bull trout range, and throughout the Athabasca rainbow trout range. We assessed historical and future threats to evaluate the relative importance of individual threats to each DU and compare their impact among species. Individual threats fall into the broad categories of angling, non-native species and genes, habitat loss and alteration, and climate change. Severity of each threat varies by DU and reflects the interaction between species’ biology and the location of the DU. Severity of threats facing each DU has changed over time, reflecting extirpation of native populations, changes in management and industry best practices, expansion of non-native species and progressing climate change. The overall threat impact for each DU indicates a high probability of substantial and continuing declines and calls for immediate action.     

分流叶片对高速井泵压力脉动的影响

针对高速井泵采用分流叶片设计带来的稳定性问题,运用Creo3.0软件建立了叶轮、导叶等关键零件的三维模型;在CFX数值模拟数据与外特性试验数据吻合较好的基础上,将分流叶片的进口直径d₁与叶轮外径D₂的比值定义为一个表达分流叶片综合特性参数的量纲一化系数σ.σ分别取值0.60,0.62,0.65,设计分流叶片长短不同的3个叶轮方案,且对各方案的动静干涉区域进行了详细的压力脉动数值模拟计算及分析.结果表明:压力脉动幅值大小与监测点和交界面的径向距离有关,径向距离越大,压力脉动幅值越小;各监测点压力脉动随分流叶片长度的减小逐渐减弱,当分流叶片长度减小到某一临界值以后,压力脉动基本保持不变;当σ=0.62时,压力脉动幅值较小,脉动周期清晰;除中流线上的监测点以外,各监测点压力脉动主频受叶轮叶频的影响较大,分流叶片对中流线上监测点的压力脉动影响较大.     

应力波在落叶松活立木中传播影响因素数值模拟

探究应力波在落叶松活立木中传播的影响因素,有助于研究应力波在人工林活立木中的传播机理。依据固体介质中的应力波传播理论和弹性力学理论,将活立木看作只由心材层和边材层组成的两层结构材料,基于活立木的正交各向异性假定,利用COMSOL Multiphysics多物理场仿真软件对应力波在活立木中的传播进行了模拟计算,并研究了敲击载荷频率、活立木胸径和心材比对应力波传播的影响。结果表明,应力波波速随着载荷脉冲频率的增大而减小;对于胸径为10 cm的活立木模型,当传播距离达到1. 2 m时,应力波波阵面已经转换为一维平面波,而对于胸径超过30 cm的活立木模型,应力波在0～1. 2 m传播距离内是以三维膨胀波的形式传播;活立木胸径对应力波的传播速度有影响,当胸径小于10 cm时,波速较小且基本没有发生变化,当胸径从10 cm增加到40 cm时,应力波的波速随着活立木胸径的增加而增加,而当胸径超过40 cm时,波速略微增加后保持相对稳定;应力波在活立木中的波速随着心材比的增大而减小。胸径对应力波在活立木中的传播形式以及波阵面形状有影响,而敲击载荷频率和心材比对应力波在活立木中的传播形式以及波阵面形状没有影响,但三者都会对应力波的传播速度产生影响,数值模拟最佳的敲击载荷频率为2. 5 kHz,应力波在活立木中的传播速度不只取决于边材的力学性能,而是受到心材和边材的共同影响。     

叶片角度对输水泵站泵装置水力性能影响分析

为研究输水泵站泵装置水力性能受叶片角度变化的影响,采用CFD方法模拟全流道泵装置水力性能,分析设计流量工况下叶片角度变化对进水流道、出水流道流动及叶轮内部流动特性和水力性能的影响.结果表明:在设计流量工况下,叶片角度偏离设计工况角度,叶轮进口近轮毂区存在回流、脱流;叶片角度偏离设计工况角度越大,进水流道、出水流道内水流流态越差,水力损失越大.当叶片角度调节为-8°工况时,与叶片角度-0°工况比较,进水流道和出水流道水力损失相对值最大,分别为1.28和2.89.即叶片同等偏离角度下,出水流道水力损失增大幅度较进水流道更加明显.对比数值模拟结果与模型试验结果得出,在设计流量工况,叶片角度为0°时,扬程相对误差为1.2%,效率相对误差为2.1%,两者吻合较好.     

翅形态特征在重阳木斑蛾成虫性别鉴定中的应用

为了明确重阳木斑蛾的翅形态特征在其性别鉴定中的作用,探索雌雄难于区分的成虫的数值鉴定方法。采用图像处理与分析技术,通过爱普生扫描仪获取重阳木斑蛾前翅图,利用BugShape v1.0软件提取雌雄成虫翅的轮廓特征,利用tpsDig2软件获取翅脉交叉点位置特征,并利用独立样本t检验和标志点空间普氏叠加和扭曲分析,以明确此类特征在该成虫雌雄鉴定中的作用。结果表明,重阳木斑蛾成虫左右前翅轮廓特征在同一性别中差异不显著。仅利用左前翅数据进行分析时,翅面积、短轴长度、等效圆半径、偏心率、球状性和圆形度在两个性别中存在极显著差异,周长和长轴长度的差异达到显著水平,而紧凑度和叶状性差异不显著。使用左右前翅作为数据集进行分析时,除紧凑度和叶状性差异仍不显著外,其余参数均达到极显著水平。雌雄前翅轮廓特征作为指标来判别性别时正确率为100%,但存在左右翅相互错判现象。翅膀内部翅脉交叉点的空间位置在个体间存在较大差异,主要表现在相对于翅的横向方向变异大。雌雄间的差异主要存在于外缘附近的翅脉交叉点。结论:通过前翅的轮廓特征可以区分重阳木斑蛾雌雄成虫的差异。翅脉交叉点空间位置在雌雄间和个体间存在一定的变异。     

Movement behaviour of large female yellow European eel (Anguilla anguilla L.) in a freshwater polder area

Due to a recruitment decline of more than 90% in 30 years, the European eel (Anguilla anguilla L.) has been classified by IUCN as critically endangered. Although the species has been studied intensively to obtain knowledge to improve management, studies about the resident yellow stage are relatively scarce. In this study, 52 large female yellow eels were tagged with acoustic transmitters in a Belgian polder system and tracked by a network of 23 automatic listening stations. We studied both circadian and seasonal movement patterns and the effect of environmental variables on these patterns. Large female yellow eels were most active at night in late summer and early autumn. A generalised linear mixed model showed that their movement is only slightly influenced by environmental variables. Moreover, as yellow eels show high site fidelity (i.e., the majority was detected only in the habitat type of their catch‐release location), they do not encounter many human‐induced connectivity problems in polder systems, which makes these systems highly suitable as eel growth habitat. These results can contribute to an effective eel management regarding habitat protection and restoration.     

水流作用下一种养殖金属网衣水阻力特性的数值模拟研究

为保障深远海金属网箱养殖系统的结构安全,进行网箱结构的水动力学研究是一项重要的工作。构成金属网箱主要组成部分的金属网衣是一种小直径多孔的网状结构,在波浪和水流作用下的水动力学特性与一般的海洋工程结构物有显著不同。本文基于有限元基本原理,采用梁单元模拟金属网线结构,采用连接单元模拟网线接触部位的相互作用,并运用ABAQUS软件进行数值计算,在试验验证的基础上,分析了在水流作用下一种金属菱形链网衣在不同网目尺寸、不同网线直径情况下的水阻力变化情况。数值模拟结果表明在各种工况下,当网目尺寸由25 mm增加到35 mm、45 mm时,网衣受力增加幅度的平均值分别为14.71%和38.07%;当网线直径由2.5 mm增加到3.2 mm、4.0 mm时,各工况下网衣受力增加幅度的平均值分别为25.05%和45.06%。研究结果可以为进一步开展深海养殖金属网箱水动力特性研究提供积极的基础。