Using laser to measure stem thickness and cut weed stems

Summary Stem thickness of the weed Solanum nigrum and the crop sugarbeet was determined with a He–Ne laser using a novel non‐destructive technique measuring stem shadow. Thereafter, the stems were cut close to the soil surface with a CO₂ laser. Treatments were carried out on pot plants, grown in the greenhouse, at two different growth stages, and plant dry matter was measured 2–5 weeks after treatment. The relationship between plant dry weight and laser energy was analysed using two different non‐linear dose–response regression models; one model included stem thickness as a variable, the other did not. A binary model was also tested. The non‐linear model incorporating stem thickness described the data best, indicating that it would be possible to optimize laser cutting by measuring stem thickness before cutting. The general tendency was that more energy was needed the thicker the stem. Energy uses on a field scale are discussed.     

Results from the treatment of advanced stage squamous cell carcinoma of the nasal planum in cats, using a combination of intralesional carboplatin and superficial radiotherapy: a pilot study

Six cats with an advanced stage squamous cell carcinoma (SCC) of the nasal planum were treated with a combination of superficial radiotherapy and intralesional carboplatin therapy. This multimodality protocol was well tolerated by the majority of cats and resulted in complete responses in all cats (100%). Median follow‐up for all cats is 268 days, and the median time‐to‐recurrence, time‐to‐progression and overall survival have not yet been reached. Our study, although limited in number of animals and with a relatively short median follow‐up compared to other studies for this disease, suggests that a combination of radiotherapy and intralesional carboplatin is a useful treatment option for an advanced stage SCC of the nasal planum in cats and warrants further application of the multimodality approach presented here.     

激光脉冲在橘子表皮打标的效果研究

为满足水果追溯条码清晰、耐久的要求,选取橘子为试验对象,对比纳秒激光和皮秒激光在其表面打印二维码的效果.试验结果表明:与纳秒激光相比,皮秒激光在橘子表皮上打印的线条平直度佳,轮廓清晰,对表皮的损伤更小.     

Ca对AZ31镁合金CO2激光焊接接头组织和性能的影响

采用添加填充材料的CO2激光焊接工艺对AZ31镁合金薄板进行焊接,研究了不同Ca含量对焊缝金属的显微组织和力学性能的影响.结果表明：当激光功率为1 500 W,焊接速度为3 m/min时, AZ31镁合金CO2激光焊接的焊缝金属中添加一定量的σCa＜0.19%元素,可以得到成分相对较均匀、组织细小的焊缝.当填充带材为AZC04(焊缝中σCa=0.19%)时,焊缝区晶粒相对细小,析出相细小弥散,此时焊接接头的力学性能最优,焊接效率基本可达到100%.     

A spatially-explicit method to assess the dry deposition of air pollution by urban forests in the city of Florence,Italy

Urban forests (UF) provide a range of important ecosystem services (ES) for human well-being. Relevant ES delivered by UF include urban temperature regulation, runoff mitigation, noise reduction, recreation, and air purification. In this study the potential of air pollution removal by UF in the city of Florence (Italy) was investigated. Two main air pollutants were considered – particulate matter (PM₁₀) and tropospheric ozone (O₃) – with the aim of providing a methodological framework for mapping air pollutant removal by UF and assessing the percent removal of air pollutant.The distribution of UF was mapped by high spatial resolution remote sensing data and classified into seven forest categories. The Leaf Area Index (LAI) was estimated spatially using a regression model between in-field LAI survey and Airborne Laser Scanning data and it was found to be in good linear agreement with estimates from ground-based measurements (R² = 0.88 and RMSE% = 11%). We applied pollution deposition equations by using pollution concentrations measured at urban monitoring stations and then estimated the pollutant removal potential of the UF: annual O₃ and PM₁₀ removal accounted for 77.9 t and 171.3 t, respectively. O₃ and PM₁₀ removal rates by evergreen broadleaves (16.1 and 27.3 g/m²), conifers (10.9 and 28.5 g/m²), and mixed evergreen species (15.8 and 31.7 g/m²) were higher than by deciduous broadleaf stands (4.1 and 10 g/m²). However, deciduous forests exhibited the largest total removal due to the high percentage of tree cover within the city. The present study confirms that UF play an important role in air purification in Mediterranean cities as they can remove monthly up to 5% of O₃ and 13% of PM₁₀.     

脉冲激光轰击法连续制备纳米金掺杂YBCO

利用超声法获得钇钡铜氧（YBCO）和乙醇混合溶液,采用聚焦脉冲激光轰击浸于流动无水乙醇中的金靶,连续制备得到纳米金和乙醇混合溶胶.将纳米金和乙醇混合溶胶直接滴入接收器中的YBCO和乙醇混合溶液中,经干燥获得纳米金掺杂的YBCO材料.结果发现,纳米金未明显改变YBCO的吸放热现象,对样品的组成影响不大;掺杂0.01%、0.05%重量比例的纳米金后YBCO的结晶度和超导转变温度Tc均有所提高.     

The Fluorescent Characterization and Analysis of Two Brucella Attenuated Vaccine Infecting Mouse Macrophagocyte

The experiment was conducted to discuss the difference of binding time of green fluorescent protein B.melitensis M5 (GFP-M5) and B.abortus S19 (GFP-S19) infecting the mouse macrophagocyte (RAW264.7),lysosome,endoplasmic reticulum and golgi body in the initial stage and compare the binding rate of GFP-M5,GFP-S19 with organelle in different timeline,respectively,by confocal laser scanning microscope (CLSM) and flow cytometry.The result showed that GFP-M5 and GFP-S19 were successfully constructed.The intracellular survival ability of Brucella M5,Brucella S19,GFP-M5 and GFP-S19 were not obvisouly affected after infecting RAW264.7.GFP-M5 and GFP-S19 could enter the macrophagocyte in 30 mins,and in 2 h the Brucella could reach lysosome,endoplasmic reticulum and golgi body.In addition,the binding time for two attenuated vaccine did not show differences in 1,2,3 and 4 h.The content of GFP⁺ cell produced by RAW264.7 infected by GFP-M5 and GFP-S19 did not show significant differences (P>0.05).Therefore,the two strains did not have significant differences in the invasion ability in the initial stage of infecting host cell.     

ON STUDY DIGGED FIELD MOVEMENT''S LAW BY EXPERIMENTAL METHOD OF LASER HOLOGRAPHIC MOIRE INTERFERMETRY

The high-precision displacement measuring technology of optic-measuring mechanics is, for the first time,successfully applied on the similar model of the model land-layer with a new-type variable modulus of elasticity. The angle of movement and the distributed displacement of upper and lower rock-layers are measured. The technology is a combination of laser's technology and the modern chemical sticker-it is called the sticking moire interferometry. Compared with the measured values, the result is very satisfactory.     

Visualization of the FEM Analysis Data of 3D on the Cut Plane

The colored patterns on arbitrary cut plane is an important method in 3D data-field visualization of finite element.By using the technology of the Object-Oriented Programming and the method of scan-line,the colored patterns on arbitrary cut plane are given.The example by the OPENGL of Visual C++ R6 can support the theory satisfactorily.     

Melt Flow in Alloy Melted Pool Under the Action of Laser

Melt flow in the course of laser alloying is considered on the basis of mechanics. The findings show that the melt flow in laser alloying pool is mainly controlled by two action forces,i. e. the surface tension force on alloying pool.surface,caused by the temperature difference on the pool surface and the buoyancy force in alloying pool caused by the temperature difference in the horizontal direction in the melt pool. These two forces differ in their acting areas. The analysis of the Bond dimensionless number used for laser alloying shows that the two force actions are in the same order,and almost equal under the certain condition.