烯效唑浸种对干旱胁迫下工业大麻幼苗形态、渗透调节物质及内源激素的影响

选用0.4 mg·L~(-1)的烯效唑(S_(3307))浸种工业大麻"火麻一号"种子,采用盆栽试验方法,于大麻三叶期设置清水浸种后正常供水(CK)、清水浸种后干旱胁迫(D)和烯效唑浸种后干旱胁迫(D+S)3个处理,探讨烯效唑浸种对干旱胁迫下工业大麻幼苗形态、渗透调节物质及内源激素的影响。结果表明:与D处理的植株相比,D+S处理显著提高了根系干、鲜重,分别提高46.67%～61.54%和16.46%～25.53%;恢复了胁迫后期的地上部干、鲜重,复水4 d后地上部干、鲜重较D处理分别提高了4.38%和2.23%;促进了根系生长的能力,干旱胁迫8 d后,D+S处理较D处理根长、根表面积、根体积、根总投影面积、分枝数、交叉数和根尖数分别增加了34.48%、34.77%、69.10%、70.00%、29.62%、54.28%和33.07%;提高了幼苗叶片SPAD值,降低了细胞膜透性,增加了可溶性糖和可溶性蛋白含量,干旱胁迫8 d后D+S处理较D处理SPAD值增加了28.30%,细胞膜透性减少了17.22%,可溶性糖和可溶性蛋白含量分别增加了17.32%～36.78%和5.07%～7.94%。干旱胁迫8 d后,D+S处理使工业大麻叶片中脱落酸(ABA)含量增加了1.02倍,水杨酸(SA)和茉莉酸(JA)含量分别降低了17.79%和14.40%。可见,烯效唑浸种能通过调控工业大麻幼苗生长及生理指标来增强其抗旱能力,缓解干旱胁迫对幼苗造成的伤害。     

不同工业大麻品种对田间5种重金属吸收积累特性的比较

为了分析不同工业大麻品种对不同重金属富集与转移的差异，以云南5个工业大麻主栽品种（ym1~ym5）为试验材料，修复云南矿区重金属污染严重的农田。结果表明： 5个工业大麻品种中，成熟期的根系对Pb和Cd吸收量最大的为ym1，对As、Cu和Zn吸收量最大的为ym3，而ym5对Pb、Cu、Cd和Zn吸收量皆最小；茎叶对As、Cu和Cd吸收量最大的为ym3，对Pb和Zn吸收量最大的分别为ym1和ym2；种子对Pb和Cd吸收量最大的为ym2，对As和Cu吸收量最大的为ym5，对Zn吸收量最大则为ym3，ym1种子对Pb、As和Cu吸收量皆最小，对Cd、Zn吸收最小的品种分别为ym4和ym2；5个品种表现为除Cu外，茎叶富集系数皆大于根，根系向茎叶的转运系数均大于1。研究表明，ym1可作为Pb污染修复植物，ym3可作为As、Zn、Cu和Cd污染修复的适推品种。     

中国工业大麻种业创新发展策略研究

工业大麻是重要的经济作物，中国是工业大麻生产和出口大国。然而，工业大麻种业发展滞后对我国工业大麻高质量发展提出严峻挑战的问题。本研究采用实地调研和文献综述的方法，分析了当前国内工业大麻种业的发展态势和存在的问题，探讨我国工业大麻种业创新发展路径。研究表明，我国工业大麻种业构建了全国行业标准和地方法律规范相结合的政策保障体系，推动了育种创新主体由公益性科研院所向企业转变，创建了以多用途为特色的育种技术体系，形成了良种区域化的种植格局和技术服务体系，奠定了该产业创新发展的基础。但缺乏国家层面或跨区域协同的工业大麻法规体系、育种繁种技术资源分散和低效率共存、面临国外种业知识产权布局先发优势挑战、商业化育种体系不完善等问题成为主要障碍。因此，提出了加快完善政策保障体系、培育多元育种体系、打造生产经营体系、构建国际合作体系，以期提升工业大麻种业创新发展能力。     

工业大麻割晒机的三维仿真设计

针对当前我国工业大麻割晒机研究现状与发展需求,运用三维软件UG设计了一款工业大麻割晒机,包括夹持输送机构、切割机构、传动机构、机架等。首先对星轮式拨禾机构、往复式切割器等零部件进行三维建模,然后根据各零部件之间的准确约束进行整机装配,并对样机各运转部件进行了干涉检查,仿真结果表明所设计的工业大麻割晒机符合农艺要求,并为后续的虚拟样机运动仿真、割台的结构优化奠定了良好的基础,提高了样机的研发速度。     

响应面法优化工业大麻叶抑制金黄色葡萄球菌物质超声提取工艺

为提升工业大麻叶生理活性功能,研究工业大麻叶抑菌物质的最佳超声提取工艺。采用牛津杯法结合微量二倍稀释法比较工业大麻叶乙醇提取物对金黄色葡萄球菌、大肠杆菌、单核细胞李斯特菌、沙门氏菌的抑菌作用,并以抑菌效果最佳的金黄色葡萄球菌为供试菌,在单因素试验基础上,以抑菌圈直径为响应值,采用Box-Behnken响应面法优化超声辅助浸提工业大麻叶抑菌物质的工艺参数。结果表明,最佳提取工艺条件为液料比14∶1(m L/g),乙醇浓度88%,超声温度29℃,超声时间20 min,在该条件下,工业大麻叶提取物对金黄色葡萄球菌的抑菌圈直径达(19. 65±0. 20) mm,与理论最优值19. 68 mm接近。该工艺稳定可靠,适用于工业大麻叶中抗金黄色葡萄球菌物质的超声提取,可为工业大麻叶的高效利用及新型防腐剂的开发提供理论依据。     

Quality traits related to lipid component in hemp(Cannabis Sativa L.) germplasm

In order to accelerate breeding progress of oil-used hemp, 8 quality traits related to lipid component were measured and analyzed in 55 representative hemp germplasms. Results showed that linolenic acid content had the highest variance coefficient of 51.67% as well as protein content had minimum variance coefficient of 4.07%. Correlation analysis showed that total oil content was significantly positively correlated to linolenic acid, while significantly negatively correlated with oleinic acid. Protein content was significantly positively correlated with linolenic acid but significantly negatively with stearic acid. Both total oil and protein content were closely correlated with other traits. The first 3 PCs from principal component analysis of 8 traits accounted for 83.53% contribution. All hemp germplasms were classified into 3 groups at the level of euclidian distance D=8.5 using cluster analysis. The above analysis and classification may provide a reliable theoretical basis and technological guidance for germplasms utilizing and accelerating breeding process.     

Sowing time and prediction of flowering of different hemp (Cannabis sativa L.) genotypes in southern Europe

Fibre hemp can be grown under a wide range of agro-ecological conditions, but it requires special attention for several physiological features and crop management. A management strategy in order to reduce inputs and thus achieve acceptable yield could be achieved optimizing sowing time. With this respect, the effects of sowing date on hemp biology and yield was studied, using two monoecious and two dioecious genotypes. Field experiments were carried out in two subsequent years (2003-2004) in South of Italy, using drip irrigation system. Sowing time, in the two year period, ranged between March 10th and July 22nd. Optimal sowing time was observed between the end of April and the first three weeks of May; in that range, the dioecious Fibranova yielded the most in terms of aboveground biomass and stem dry yield, followed by Tiborszallasi, while the two monoecious showed the lowest yield. On the contrary, before and after that period, the shorter day length caused an early floral induction that strongly reduced stem and fibre elongation, and thus aboveground dry biomass and consequently stem yields. Based on this study a simulation model focusing on flowering prediction in Mediterranean environment was developed.     

Modelling approach for the quantitative variation of sex expression in monoecious hemp (Cannabis sativa L.)

Sex expression is of primary importance for the genetic improvement and production of monoecious hemp: masculinized phenotypes are associated with higher fungal sensitivity, and feminized phenotypes with higher seed yields. However, sex expression varies quantitatively among plants and nodes and with time. Here, we developed eight variables that characterize the sex expression in monoecious hemp to dissect its genetic determinism. The monoecy degree (MD), ranging from 1 (mostly male flowers) to 5 (mostly female flowers), was recorded for each node of 167 plants, at 6 times at 1‐week intervals. Two types of longitudinal variables were constructed: ‘synthesis’ (mean MD and percentages of nodes of each MD) and ‘structure’. The latter consisted of the parameters of a logistic curve describing MD as a function of the node position. An r‐square of 0.97 was obtained between the estimated and observed MD values, and the logistic parameters were weakly correlated with each other and with the synthesis variables. Therefore, we conclude that the present modelling approach is relevant for characterizing the sex expression in monoecious hemp.     

Nitrogen mineralization from ‘AU Golden' sunn hemp residue

The tropical legume sunn hemp (Crotalaria juncea L.) cultivar ‘AU Golden’ has the potential to provide substantial nitrogen (N) to subsequent crops to reduce recommended application rates of synthetic N fertilizers. A mineralization field trial was conducted to measure mass decomposition and N and carbon (C) amounts remaining from sunn hemp residue following three planting dates (May, June, and July) during the 2013 growing season at the Tennessee Valley (TVS) and Coastal Plain (WGS) locations of AL. Residue from June and July plantings contained 50.0% and 61.1% N at WGS and 41.5% and 66.5% N at TVS by the end of their respective incubation periods compared to residue from the May planting, which contained 21.1% N at WGS and 47.8% at TVS. In order to create a more synchronous relationship between ‘AU Golden’ residue N mineralization and crop demand, termination must be delayed until approximate planting of the following crop.     

生长期和植株性别对工业大麻杆果胶含量及质量的影响

果胶是木质材料中关注较少的化学成分,为了确定果胶在生物质材料中粘结细胞的关键作用,以实现利用果胶酶进行纤维分离。按照称重法、造纸原料-果胶含量的国家标准（GB/T 10742—2008）等测定方法,以工业大麻为对象,研究了不同生长期和植株性别中工业大麻杆的单株质量、果胶含量及果胶质量的变异特性。结果表明,大麻杆在整个生长周期19~186 d内,果胶含量在19.74%~5.68%范围内变化,随着生长天数增加而降低(p<0.000 1);果胶质量随着生长天数的增加而增加(p<0.000 1),质量范围为0.02~22.88 g;生长期相同时,雌株的果胶含量>雄株,约为0.1%~2.21%(p=0.000 5)。果胶主要存在于纤维胞间层和初生壁中,随着纤维细胞次生壁的逐步生成,果胶含量降低;但随着工业大麻秆生长期的延长,细胞数目的增加果胶质量增加。