农田残膜机械回收膜土分离模型的建立与仿真试验

为明确农田残膜机械回收过程中膜土分离机理，基于土壤接触理论及土壤黏附力学，建立残膜与土壤颗粒的接触模型和残膜与土壤颗粒间黏结合力变化的数学模型。利用EDEM软件，进行0.01、0.02、0.03 mm厚度残膜与黏附土壤剥离剪切仿真试验。拟合结果表明，0.01、0.02、0.03 mm残膜厚度下，膜土分离剪切力与剥离剪切位移均呈三次方关系，决定系数分别为0.805 9、0.872 2、0.878 4；对台架验证试验结果进行拟合，决定系数分别0.793 2、0.854 8、0.869 0，相对误差最大值为13.77%。     

基于Hertz接触理论的黑水虻幼虫碰撞恢复系数测定

为建立黑水虻幼虫与收集、输送、分离等机械工作部件间发生碰撞时的碰撞模型，基于黑水虻幼虫生物特性，应用Hertz弹性碰撞理论推导了黑水虻幼虫碰撞过程动力学方程，结合运动学方程原理构建了黑水虻幼虫恢复系数的测定装置并进行了黑水虻幼虫恢复系数测定试验。试验针对第5龄期的黑水虻幼虫，采用L16(44×23)混合正交试验方案研究了碰撞材料、材料厚度、下落高度、碰撞角、跌落方向、含水率等因素对黑水虻幼虫恢复系数的影响，然后对碰撞材料、材料厚度、下落高度、碰撞角、跌落方向进行单因素试验，并获得了材料厚度、下落高度、碰撞角对恢复系数的影响规律与回归方程，且方程的决定系数均不小于0.9427。试验结果表明，影响黑水虻幼虫恢复系数的因素影响由大到小为：碰撞材料、下落高度、碰撞角、跌落方向、碰撞材料厚度、含水率，其中含水率对恢复系数影响不显著。单因素试验结果可得：黑水虻幼虫与Q235钢、铝合金、有机玻璃、橡胶等碰撞材料间的恢复系数依次降低，随下落高度的增大而逐渐减小，随材料厚度的增加而逐渐增大，恢复系数随碰撞角的增大而整体呈增大趋势，且横向跌落方向大于纵向跌落方向。该文研究结果可为黑水虻幼虫收集、输送、分离等机械相关工作部件优化设计提供参考依据。     

稻谷颗粒模型离散元接触参数标定与试验

EDEM与FLUENT耦合模拟稻谷清选时,稻谷颗粒参数设置的准确性直接影响仿真结果的可信度。结合稻谷颗粒堆积角的实测试验与仿真试验,标定了稻谷颗粒模型间静摩擦系数、滚动摩擦系数2个主要接触参数。设计了堆积角形成装置,该装置采用坍塌法和注入法同时形成2种堆积角,可以减小非同时形成所引起的测量误差;创建了稻谷颗粒的离散元模型,结合堆积角的实测试验与仿真试验,建立了2个主要接触参数与2种堆积角之间的二元回归方程;以稻谷颗粒2种堆积角的实测结果作为目标值,对回归方程进行数值求解,得到颗粒模型间的静摩擦系数、滚动摩擦系数分别为0.433 6、0.161 5;设计了抛洒试验对标定后的参数进行验证,抛洒长度、宽度和近抛洒端堆积角等特征参数的实测结果与仿真结果的相对误差小于5.7%,这表明颗粒的模拟运动轨迹与实际运动轨迹基本一致,所创建的稻谷颗粒离散元模型及标定得到的接触参数可以为EDEM-FLUENT耦合仿真稻谷清选过程提供参考。     

颗粒肥料离散元仿真摩擦因数标定方法研究

对分体圆筒法、倾斜法、抽板法和斜面法4种颗粒特性测试方法进行Plackett-Burman多因素显著性筛选试验,试验方差分析结果表明,不同的测试方法影响测量结果的显著因素与因素显著程度。根据分体圆筒法、倾斜法和斜面法的方差分析结果,提出一种基于颗粒物料整体特性的摩擦因数标定方法,将仿真试验与真实试验相结合,依次标定出尿素颗粒与PVC材料间静摩擦因数为0. 41,颗粒间静摩擦因数为0. 36,颗粒间滚动摩擦因数为0. 15。将所标定的摩擦因数采用无底圆筒法进行验证试验,休止角仿真试验结果为30. 57°,真实试验结果为31. 74°,相对误差为3. 69%,不同含水率下的实际试验休止角与所标定摩擦因数下的仿真休止角相对误差均不大于4. 59%,仿真试验结果与真实试验结果无显著差异,验证了所标定摩擦因数的有效性。本方法可用于其他颗粒状物料间摩擦因数的标定试验。     

6种喷雾助剂对3种药剂表面张力与接触角的影响

为达到农药减施增效的目的,将6种喷雾助剂(强力源、柔水通、有机硅、阿普顿、怀农特、倍创)与3种药剂(70%吡虫啉水分散粒剂、5%阿维菌素乳油、1.3%苦参碱水剂)混配,测定混配后药液的表面张力和接触角变化,分析药液表面张力和接触角的关系。结果表明,添加不同质量浓度的6种喷雾助剂均能降低药液的表面张力,其中,有机硅、强力源、怀农特降低3种药剂表面张力的效果最好,柔水通、阿普顿次之,倍创效果最差。有机硅、柔水通、强力源、怀农特降低3种药剂接触角的效果最好,阿普顿次之,倍创效果最差。分析了3种药剂在添加不同质量浓度的6种喷雾助剂后药液的表面张力与接触角余弦值的关系,结果显示,二者呈显著(P<0.05)负相关关系。综上,合理选用喷雾助剂有助于提高农药的利用率。研究结果可为田间施药和进一步研发喷雾助剂提供数据支持。     

Estimating the level of disease risk and biosecurity on commercial poultry farms in New Zealand

ABSTRACT

Aims: To collect baseline data on the contact risk pathways and biosecurity practices of commercial poultry farms in New Zealand, investigate the relationship between the farm-level disease contact risks and biosecurity practices, and identify important poultry health concerns of producers.

Methods: A cross-sectional survey of all registered New Zealand commercial poultry operations was conducted in 2016 collecting information on farm demographics, biosecurity practices, and contact risk pathways. Survey responses were used to generate an unweighted subjective disease risk score based on eight risk criteria and a subjective biosecurity score based on the frequency with which producers reported implementing seven biosecurity measures. Producer opinions towards poultry health issues were also determined.

Results: Responses to the survey response were obtained from 120/414 (29.0%) producers, including 57/157 (36.3%) broiler, 33/169 (19.5%) layer, 24/55 (44%) breeder, and 6/32 (19%) other poultry production types. Median disease risk scores differed between production types (p?<?0.001) and were lowest for breeder enterprises. The greatest risk for layer and broiler enterprises was from the potential movement of employees between sheds, and for breeder enterprises was the on- and off-farm movement of goods and services. Median biosecurity scores also differed between production types (p?<?0.001), and were highest for breeder and broiler enterprises. Across all sectors there was no statistical correlation between biosecurity scores and disease risk scores. Producers showed a high level of concern over effectively managing biosecurity measures.

Conclusions: The uptake of biosecurity measures in the commercial poultry farms surveyed was highly variable, with some having very low scores despite significant potential disease contact risks. This may be related to the low prevalence or absence of many important infectious poultry diseases in New Zealand leading farmers to believe there is a limited need to maintain good biosecurity as well as farmer uncertainty around the efficacy of different biosecurity measures. Further research is needed to understand barriers towards biosecurity adoption including evaluating the cost-effectiveness of biosecurity interventions.     

植物源蒸馏油对柑橘木虱控制效果的评价

植物源蒸馏油是一种新型植物油，本文探讨了植物源蒸馏油在害虫控制中的应用潜力。以矿物油乳剂为参照，以柑橘木虱为试虫，分析比较植物油蒸馏油的触杀和拒避作用。植物油和矿物油对柑橘木虱的卵、若虫和成虫均有一定的触杀作用，其中对若虫尤其低龄若虫的触杀作用最强，可达90%以上。两种油剂对雌虫产卵均有一定的拒避作用，拒避雌虫产卵维持约2 d。两种油剂对成虫寄主选择没有明显的拒避作用。总体上，植物源蒸馏油对柑橘木虱的触杀作用以及对成虫的拒避作用与矿物油相当。如果进一步改进该植物油的乳化效果，可替代矿物油乳剂应用于害虫防治中。     

Being exposed to low concentrations of pirimiphos-methyl and chlorfenapyr has detrimental effects on the mobility of Trogoderma granarium

BACKGROUND

Sublethal effects of insecticides may negatively affect several biological and behavioral traits of insects. The lethal effects of pirimiphos-methyl and chlorfenapyr have been previously showed on Trogoderma granarium, but little knowledge is available about their sublethal effects at low concentrations on both sexes. Herein, the sublethal effects of pirimiphos-methyl and chlorfenapyr on the mobility of T. granarium males and females were investigated.

RESULTS

Lethal concentration (LC) values of pirimiphos-methyl and chlorfenapyr were lower for T. granarium females than males. LC values on males were LC₁₀ = 0.000788 and 0.00139 mg active ingredient (a.i.) cm⁻², LC₃₀ = 0.00350 and 0.00535 mg a.i. cm⁻², and LC₅₀ = 0.00986 and 0.0136 mg a.i. cm⁻² for pirimiphos-methyl and chlorfenapyr respectively. LC on females were LC₁₀ = 0.000704 and 0.00110 mg a.i. cm⁻², LC₃₀ = 0.00323 and 0.00428 mg a.i. cm⁻², and LC₅₀ = 0.00925 and 0.0110 mg a.i. cm⁻² for pirimiphos-methyl and chlorfenapyr respectively. The walking duration of beetles exposed to LC₃₀ of pirimiphos-methyl was significantly lower than the individuals exposed to LC₁₀ and LC₃₀ of both insecticides and control ones. Pirimiphos-methyl LC₃₀-exposed males remained more time on their back (101.7 s) than females (46.9 s), while the latter stayed immobile longer than males (381.7 s versus 371.9 s). The highest speed was recorded for control beetles (14.17 mm s⁻¹ females vs. 12.44 mm s⁻¹ males), while the lowest speed was observed in pirimiphos-methyl LC₃₀-treated males (8.36 mm s⁻¹) and females (9.66 mm s⁻¹).

CONCLUSIONS

Overall, males and females exposed to low concentrations of pirimiphos-methyl and chlorfenapyr showed reduced motility. This knowledge can be exploited further to unlock behavioral effects of insecticides for effective pest management programs in warehouses. © 2023 Society of Chemical Industry.     

10种中草药提取物对棉铃虫、绿盲蝽触杀活性研究

棉铃虫Helicoverpa armigera和绿盲蝽Apolygus lucorum是两种重要的经济作物害虫。为寻找一种安全高效的防治新手段,本文对10种中草药提取物触杀活性开展了研究。结果表明,在10种中草药提取物中,苦杏仁杀虫活性最高,药后7 d棉铃虫、绿盲蝽校正死亡率分别为65.4%和100%。发现苦杏仁粗提物经不同溶剂萃取后发现,氯仿萃取时析出物对绿盲蝽触杀活性最高,药后7 d校正死亡率可达96.9%。硅胶柱分离结果表明,流分L36-48具有较高的触杀活性,药后7 d校正死亡率为84.7%。本研究评价了10种中草药提取物对棉铃虫和绿盲蝽的触杀活性,并对苦杏仁有效成分开展了初步的分离鉴定,以期为两种害虫高效安全的新型药剂开发提供理论基础。     

6种公路常绿植物叶面特性对滞尘效果的影响研究

通过选择6种具有代表性的道路常绿植物,应用接触角测定仪测定了不同树种叶片的接触角,通过扫描电镜观察比较了6种常绿植物的叶表面形态结构,分析其对滞尘能力的影响。试验结果表明常绿植物叶片正面接触角越大,滞尘能力越小;表面叶孔越多,粗糙度越大,滞尘能力越强。研究成果可为城市绿化树种的选择提供基础依据。